A novel atmospheric dielectric barrier discharge (DBD) plasma graft-filling technique to fabricate t

Abstract A double-plasma grafting strategy for the fabrication of the “pore-filling” composite membranes was proposed herein. By means of atmospheric dielectric barrier discharge (DBD) plasma, the graft copolymer was covalently anchored in the sublayer pores and onto the surface of the asymmetric polyacrylonitrile (PAN) ultrafiltration (UF) membrane through the combination of syn-irradiation grafting and postirradiation grafting of macromonomer poly(ethylene glycol) methacrylate (PEO526OHMA), consequently, a “pore-filling” composite membrane for pervaporation of aromatic/aliphatic hydrocarbons was obtained. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle measurements (WCA), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX) were utilized to characterize the composite membrane. The effects of DBD irradiation time, DBD input voltage, macromonomer concentration on the degree of grafting and pervaporation performance of composite membrane for the toluene/ n -heptane mixtures (1:4 in mass) at 80 °C were investigated. Separation factor α toluene/ n -heptane up to 7.8 and permeate flux up to 1.62 kg/m 2  h were achieved.

[1]  B. Meenan,et al.  Chemical grafting of poly(ethylene glycol) methyl ether methacrylate onto polymer surfaces by atmospheric pressure plasma processing. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[2]  G. W. Meindersma,et al.  Conceptual process design for aromatic/aliphatic separation with ionic liquids , 2008 .

[3]  Zhi‐Kang Xu,et al.  Surface hydrophilization of microporous polypropylene membrane by the interfacial crosslinking of polyethylenimine , 2009 .

[4]  D. Chung,et al.  Control of water permeation by pH and ionic strength through a porous membrane having poly(carboxylic acid) surface-grafted , 1992 .

[5]  J. Villaluenga,et al.  A review on the separation of benzene/cyclohexane mixtures by pervaporation processes , 2000 .

[6]  H. Kita,et al.  Pervaporation of aromatic/non-aromatic hydrocarbon mixtures through plasma-grafted membranes , 1999 .

[7]  U. Kogelschatz.  Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications , 2003 .

[8]  R. Baker.  Membrane Technology and Applications , 1999 .

[9]  Zhi‐Kang Xu,et al.  Surface hydrophilization for polypropylene microporous membranes: A facile interfacial crosslinking approach , 2009 .

[10]  W. Koros,et al.  Carboxylic acid containing polyimides for pervaporation separations of toluene/iso-octane mixtures , 2003 .

[11]  P. Dubruel,et al.  Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review. , 2009, Biomacromolecules.

[12]  S. Nakao,et al.  Plasma-graft filling polymerization: preparation of a new type of pervaporation membrane for organic liquid mixtures , 1991 .

[13]  Robert Y. M. Huang,et al.  Polymeric membrane pervaporation , 2007 .

[14]  Kenneth M. Persson,et al.  Contact angles of ultrafiltration membranes and their possible correlation to membrane performance , 1992 .

[15]  H. Schwarz,et al.  Separation of aromatic/aliphatic hydrocarbons by photo-modified poly(acrylonitrile) membranes , 2004 .

[16]  Satoshi Hirakawa,et al.  Pervaporation properties to aromatic/non-aromatic hydrocarbon mixtures of cross-linked membranes of copoly(methacrylates) with pendant phosphate and carbamoylphosphonate groups , 2002 .