Performance of Thin‐Film Lithium Energy Cells under Uniaxial Pressure

The ability of all-solid-state thin-film lithium energy cells to withstand the uniaxial uniformly distributed surface pressure of about 550 kPa required for embedding in laminate carbon fiber reinforced plastics (CFRPs) composites, and their maximum uniaxial surface pressure operational limit were investigated. Below 2 MPa, no discernible effects resulting from the applied uniaxial pressure were observed, and the energy cells performed reliably and predictably at nominal charge/discharge rates.

[1]  Ganesan Nagasubramanian,et al.  Effects of additives on thermal stability of Li ion cells , 2005 .

[2]  G. Jellison,et al.  A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride , 1997 .

[3]  N. Dudney,et al.  “Lithium‐Free” Thin‐Film Battery with In Situ Plated Li Anode , 2000 .

[4]  S. D. Jones,et al.  A microfabricated solid-state secondary Li battery , 1996 .

[5]  P. Bruce,et al.  Nanostructured materials for advanced energy conversion and storage devices , 2005, Nature materials.

[6]  B. Scrosati,et al.  A High-Rate, Long-Life, Lithium Nanocomposite Polymer Electrolyte Battery , 2001 .

[7]  Tony Pereira,et al.  The performance of thin-film Li-ion batteries under flexural deflection , 2006 .

[8]  P. Butler,et al.  Lithium battery thermal models , 2002 .

[9]  Ganesan Nagasubramanian,et al.  Electrical characterization of all-solid-state thin film batteries , 2004 .

[10]  Sung-Man Lee,et al.  An all-solid-state thin film battery using LISIPON electrolyte and Si–V negative electrode films , 2003 .

[11]  J. Whitacre,et al.  Fabrication and testing of all solid-state microscale lithium batteries for microspacecraft applications , 2002 .

[12]  B. S. Kwak,et al.  Thin-film rechargeable lithium batteries , 1994 .

[13]  Muhammad A. Qidwai,et al.  Structure-battery multifunctional composite design , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[14]  E. Roth,et al.  Thermal abuse performance of high-power 18650 Li-ion cells , 2004 .

[15]  Nancy J. Dudney,et al.  Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries , 1992 .

[16]  S. D. Jones,et al.  Development and performance of a rechargeable thin-film solid-state microbattery , 1995 .

[17]  Venkataraman Thangadurai,et al.  Developments of high-voltage all-solid-state thin-film lithium ion batteries , 2006 .

[18]  James P. Thomas,et al.  Mechanical design and performance of composite multifunctional materials , 2004 .

[19]  Bruce Dunn,et al.  Three-dimensional battery architectures. , 2004, Chemical reviews.

[20]  山本 治,et al.  Lithium ion batteries : fundamentals and performance , 1998 .

[21]  Ganesan Nagasubramanian,et al.  Accelerated power degradation of Li-ion cells , 2003 .