Improvement in mechanical and thermal properties of phenolic foam reinforced with multiwalled carbon nanotubes

Phenolic foams reinforced with pristine and functionalized multiwalled carbon nanotubes (MWCNTs) were fabricated to develop fire-resistant materials with improved mechanical properties. The influences of the contents of carboxyl multi-walled carbon nanotubes (MWCNTs-COOH) and of MWCNTs types on the compressive properties of the composite foams were investigated. The microstructure and detailed failure behavior of MWCNTs/phenolic composite foams were studied using scanning electron microscopy (SEM) and in situ quasistatic compression inside SEM, respectively. In addition, thermal performances were evaluated by thermogravimetric analysis (TGA) and vertical burning method. It is found that as heterogeneous nucleation agents, MWCNTs increase cell density and decrease cell size of the produced foams, and that as reinforcements located in cell walls, MWCNTs impart high strength and stiffness to brittle foams. Moreover, MWCNTs reinforced foams have higher thermal stability than raw foams and exhibit similar excellent resistance to flame, confirming the effectiveness of MWCNTs as stabilizers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1479–1488, 2013

[1]  Xin Zhang,et al.  The thermal and mechanical properties of graphite foam/epoxy resin composites , 2012 .

[2]  Y. Zhou,et al.  Dispersion of TiH2 Foaming Agent in Precursors via Melt Route , 2012 .

[3]  L. Schadler,et al.  An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foams , 2011 .

[4]  E. Yilmaz,et al.  MWNT reinforced polyurethane foam: Processing, characterization and modelling of mechanical properties , 2011 .

[5]  Jin Kuk Kim,et al.  Effect of carbon black content on microcellular structure and physical properties of chlorinated polyethylene rubber foams , 2010 .

[6]  L. Schadler,et al.  The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams , 2010 .

[7]  Chuck Zhang,et al.  Synthesis and processing of PMMA carbon nanotube nanocomposite foams , 2010 .

[8]  Milo S. P. Shaffer,et al.  Enhanced acoustic damping in flexible polyurethane foams filled with carbon nanotubes , 2009 .

[9]  Gue-Hyun Kim,et al.  Ethylene vinyl acetate copolymer (EVA)/multiwalled carbon nanotube (MWCNT) nanocomposite foams , 2009 .

[10]  S. Nutt,et al.  Modeling of Fiber-reinforced Phenolic Foam , 2008 .

[11]  Md. Enamul Kabir,et al.  Enhancement in thermal and mechanical properties of polyurethane foam infused with nanoparticles , 2008 .

[12]  L. Bednarz,et al.  Foams of polycaprolactone/MWNT nanocomposites for efficient EMI reduction , 2008 .

[13]  S. Nutt,et al.  Mechanical Behavior of Hybrid Composite Phenolic Foam , 2008 .

[14]  John P. Basbagill.  Fiber reinforced phenolic foam: Climatic effects on mechanical properties and building applications in northern Thailand , 2008 .

[15]  T. Kashiwagi,et al.  Effects of aspect ratio of MWNT on the flammability properties of polymer nanocomposites , 2007 .

[16]  S. Nutt,et al.  Flammability properties and mechanical performance of epoxy modified phenolic foams , 2007 .

[17]  V. Rangari,et al.  Cloisite clay‐infused phenolic foam nanocomposites , 2007 .

[18]  T. Goswami,et al.  Carbon nanotubes – Production and industrial applications , 2007 .

[19]  Mahmoud M. Farag,et al.  Carbon nanotube reinforced composites: Potential and current challenges , 2007 .

[20]  M. Moniruzzaman,et al.  Polymer Nanocomposites Containing Carbon Nanotubes , 2006 .

[21]  Meng-Kao Yeh,et al.  Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes , 2006 .

[22]  Richard H. Harris,et al.  Nanoparticle networks reduce the flammability of polymer nanocomposites , 2005, Nature materials.

[23]  Mool C. Gupta,et al.  Novel carbon nanotube-polystyrene foam composites for electromagnetic interference shielding. , 2005, Nano letters.

[24]  Agis M. Papadopoulos,et al.  State of the art in thermal insulation materials and aims for future developments , 2005 .

[25]  Kathryn M. Butler,et al.  Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites , 2004 .

[26]  S. Nutt,et al.  Enhanced peel resistance of fiber reinforced phenolic foams , 2003 .

[27]  S. Nutt,et al.  Mechanical characterization of short fiber reinforced phenolic foam , 2003 .

[28]  R. T. Woodhams,et al.  Mechanical Properties and Characterization of Phenolic Resin Syntactic Foams , 1974 .