Microstructure and mechanical properties of Al2O3/Al2O3 composite densified through a slurry infiltration and sintering process

[1]  Haitao Liu,et al.  Effect of Sintering Temperature on Mechanical Behaviors of an Oxide Fiber‐Reinforced Oxide Matrix Composite , 2023, Advanced Engineering Materials.

[2]  W. Krenkel,et al.  Influence of matrix densification on the properties of weak matrix oxide fiber composites , 2022, Composites Part A: Applied Science and Manufacturing.

[3]  Xun Sun,et al.  Microstructure and mechanical properties of three-dimensional oxide/oxide composite fabricated by a slurry infiltration and sintering process , 2022, Journal of the European Ceramic Society.

[4]  M. Boussuge,et al.  Effect of temperature on the mechanical behaviour of an oxide/oxide composite , 2022, Journal of the European Ceramic Society.

[5]  Abhendra K. Singh,et al.  Damage evolution in quasi-statically indented alumina based oxide/oxide ceramic matrix composites: An experimental investigation , 2022, Ceramics International.

[6]  K. Zhou,et al.  Research progress of ceramic matrix composites for high temperature stealth technology based on multi-scale collaborative design , 2022, Journal of Materials Research and Technology.

[7]  Hao-Ran Li,et al.  Preparation and characterization of Nextel TM 720/ alumina ceramic matrix composites via an improved prepreg process , 2022, International Journal of Applied Ceramic Technology.

[8]  K. Rezwan,et al.  Enhancing thermal stability of oxide ceramic matrix composites via matrix doping , 2022, Journal of the European Ceramic Society.

[9]  Sung R. Choi,et al.  Erosion Characteristics of N720/Alumina Oxide/Oxide Ceramic Matrix Composites in a Combustion Environment , 2022, Journal of the European Ceramic Society.

[10]  E. Saiz,et al.  Fracture behaviour of SiC/SiC ceramic matrix composite at room temperature , 2022, Journal of the European Ceramic Society.

[11]  K. Rezwan,et al.  Increasing the tensile strength of oxide ceramic matrix mini‐composites by two‐step sintering , 2021, Journal of The American Ceramic Society.

[12]  R. Ritchie,et al.  Full-field characterisation of oxide-oxide ceramic-matrix composites using X-ray computed micro-tomography and digital volume correlation under load at high temperatures , 2021 .

[13]  Xun Sun,et al.  Microstructure and mechanical properties improvement of the Nextel™ 610 fiber reinforced alumina composite , 2021 .

[14]  Abhendra K. Singh,et al.  Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites , 2021 .

[15]  Lisheng Cheng,et al.  Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: A focused review , 2021 .

[16]  W. Simpson,et al.  Evaluation of surface finish technology in the manufacture of Oxide-Oxide ceramic matrix composites , 2020 .

[17]  T. Hussain,et al.  A review on environmental barrier coatings: History, current state of the art and future developments , 2020, Journal of the European Ceramic Society.

[18]  K. Rezwan,et al.  All-oxide ceramic matrix composites (OCMC) based on low cost 3M Nextel™ 610 fabrics , 2020 .

[19]  William E Lee,et al.  Investigation of a single-layer EBC deposited on SiC/SiC CMCs: Processing and corrosion behaviour in high-temperature steam , 2019, Journal of the European Ceramic Society.

[20]  C. Shao,et al.  High-temperature properties and interface evolution of silicon nitride fiber reinforced silica matrix wave-transparent composite materials , 2019, Journal of the European Ceramic Society.

[21]  N. Jacobson,et al.  Degradation of Nextel™ 610‐based oxide‐oxide ceramic composites by aluminum oxychloride decomposition products , 2018 .

[22]  M. Friess,et al.  Manufacture and characterization of oxide ceramic matrix composites out of commercial pre-impregnated fabrics , 2018 .

[23]  G. Pharr,et al.  Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation , 2017 .

[24]  É. Martin,et al.  Microstructure and mechanical behaviour of a Nextel™610/alumina weak matrix composite subjected to tensile and compressive loadings , 2017 .

[25]  T. Behrendt,et al.  Development and Test of Oxide/Oxide Ceramic Matrix Composites Combustor Liner Demonstrators for Aero-engines , 2017 .

[26]  William E Lee,et al.  Oxidation behaviour of SiC/SiC ceramic matrix composites in air , 2016 .

[27]  Nitin P. Padture,et al.  Advanced structural ceramics in aerospace propulsion. , 2016, Nature materials.

[28]  J. Ahmad,et al.  Deformation and damage modeling of ceramic matrix composites under multiaxial stresses , 2016 .

[29]  N. Rahbar,et al.  Mechanical behavior of a notched oxide/oxide ceramic matrix composite in combustion environment: Experiments and simulations , 2015 .

[30]  Gabriel F. Nunes,et al.  Microstructure and flexural properties of multilayered fiber-reinforced oxide composites fabricated by a novel lamination route , 2015 .

[31]  J. Ahmad,et al.  The role of oxidation in time-dependent response of ceramic–matrix composites , 2015 .

[32]  R. Hay,et al.  Determination of 3‐D Alumina Grain Orientation, Size, Shape, and Growth Kinetics from 2‐D Data in Nextel™ 610 Fibers , 2015 .

[33]  R. Hay,et al.  Fiber Strength After Grain Growth in Nextel™ 610 Alumina Fiber , 2015 .

[34]  T. Mah,et al.  Reduced Cracking in Oxide Fiber‐Reinforced Oxide Composites via Freeze‐Dry Processing , 2015 .

[35]  W. Krenkel,et al.  Novel oxide fiber composites by freeze casting , 2014 .

[36]  J. Lamon.  Influence of Interfaces and Interphases on the Mechanical Behavior of Fiber‐Reinforced Ceramic Matrix Composites , 2014 .

[37]  J. Llorca,et al.  A methodology to measure the interface shear strength by means of the fiber push-in test , 2012 .

[38]  R. Ritchie.  The conflicts between strength and toughness. , 2011, Nature materials.

[39]  M. Ruggles‐Wrenn,et al.  Influence of hold times on the elevated-temperature fatigue behavior of an oxide–oxide ceramic composite in air and in steam environment , 2007 .

[40]  F. Zok.  Developments in Oxide Fiber Composites , 2006 .

[41]  A. R. Boccaccini,et al.  Fracture behaviour of mullite fibre reinforced–mullite matrix composites under quasi-static and ballistic impact loading , 2005 .

[42]  G. Jefferson,et al.  Controlling Mechanical Properties of Porous Mullite/Alumina Mixtures Via Precursor‐Derived Alumina , 2005 .

[43]  Carlos G. Levi,et al.  Processing and Performance of an All‐Oxide Ceramic Composite , 2005 .

[44]  Stephan Schmidt,et al.  Advanced ceramic matrix composite materials for current and future propulsion technology applications , 2004 .

[45]  G. Jefferson,et al.  Mullite/Alumina Mixtures for Use as Porous Matrices in Oxide Fiber Composites , 2004 .

[46]  R. Naslain.  Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview , 2004 .

[47]  F. Lange,et al.  Processing and Properties of a Porous Oxide Matrix Composite Reinforced with Continuous Oxide Fibers , 2003 .

[48]  T. Parthasarathy,et al.  Effectiveness of Monazite Coatings in Oxide/Oxide Composites after Long‐Term Exposure at High Temperature , 2003 .

[49]  Carlos G. Levi,et al.  Effects of Matrix Porosity on the Mechanical Properties of a Porous‐Matrix, All‐Oxide Ceramic Composite , 2001 .

[50]  Frank W. Zok,et al.  The physics and mechanics of fibre-reinforced brittle matrix composites , 1994, Journal of Materials Science.

[51]  K. Rezwan,et al.  Assessment of three oxide/oxide ceramic matrix composites: Mechanical performance and effects of heat treatments , 2015 .

[52]  K. Rezwan,et al.  Oxidation-induced microstructural changes of a polymer-derived Nextel™ 610 ceramic composite and impact on the mechanical performance , 2013, Journal of Materials Science.

[53]  Thomas Behrendt,et al.  Improvement of Oxide/Oxide CMC and Development of Combustor and Turbine Components in the HiPOC Program , 2011 .

[54]  F. Zok,et al.  Mechanical properties of porous-matrix ceramic composites , 2001 .

[55]  John W. Hutchinson,et al.  Crack deflection at an interface between dissimilar elastic-materials , 1989 .

[56]  Oxide Ceramic Matrix Composites – Manufacturing , Machining , Properties and Industrial Applications , 2022 .