Enlarging the useable workspace of planar parallel robots using mechanisms of variable geometry

This paper demonstrates the efficiency of kinematic redundancy used to increase the useable workspace of planar parallel mechanisms. As examples, we propose kinematically redundant schemes of the well known planar 3RRR and 3RPR mechanisms denoted as 3(P)RRR and 3(P)RPR. In both cases, a prismatic actuator is added allowing a usually fixed base joint to move linearly. Hence, reconfigurations can be performed selectively in order to avoid singularities and to affect the mechanisms' performance directly. Using an interval-based method the useable workspace, i.e. the singularity-free workspace guaranteeing a desired performance, is obtained. Due to the interval analysis any uncertainties can be implemented within the algorithm leading to practical and realistic results. It is shown that due to the additional prismatic actuator the useable workspace increases significantly. Several analysis examples clarify the efficiency of the proposed kinematically redundant mechanisms.

[1]  Andreas Müller,et al.  Internal Preload Control of Redundantly Actuated Parallel Manipulators—Its Application to Backlash Avoiding Control , 2005, IEEE Transactions on Robotics.

[2]  A. Neumaier.  Interval methods for systems of equations , 1990 .

[3]  Jean-Pierre Merlet.  A Formal-Numerical Approach for Robust In-Workspace Singularity Detection , 2007, IEEE Transactions on Robotics.

[4]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[5]  Bijan Shirinzadeh,et al.  Certified workspace analysis of 3RRR planar parallel flexure mechanism , 2008, 2008 IEEE International Conference on Robotics and Automation.

[6]  Eldon Hansen,et al.  Global optimization using interval analysis , 1992, Pure and applied mathematics.

[7]  Computing the worst case accuracy of a PKM over a workspace or a trajectory , 2008 .

[8]  Jens Kotlarski,et al.  New interval-based approach to determine the guaranteed singularity-free workspace of parallel robots , 2009, 2009 IEEE International Conference on Robotics and Automation.

[9]  Jens Kotlarski,et al.  Improving the pose accuracy of a planar 3RRR parallel manipulator using kinematic redundancy and optimized switching patterns , 2008, 2008 IEEE International Conference on Robotics and Automation.

[10]  S. Briot,et al.  Increase of Singularity-Free Zones in the Workspace of Parallel Manipulators Using Mechanisms of Variable Structure , 2008 .

[11]  Clément Gosselin,et al.  Design and analysis of kinematically redundant parallel manipulators with configurable platforms , 2005, IEEE Transactions on Robotics.

[12]  Jadran Lenarčič,et al.  Advances in robot kinematics : mechanisms and motion , 2006 .

[13]  Vigen Arakelian,et al.  Improvement of functional performance of spatial parallel manipulators using mechanisms of variable structure , 2007 .

[14]  Walter Schumacher,et al.  A parallel x-y manipulator with actuation redundancy for high-speed and active-stiffness applications , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[15]  Juan A. Carretero,et al.  3-PRRR redundant planar parallel manipulator: Inverse displacement, workspace and singularity analyses , 2007 .

[16]  Weihai Chen,et al.  A geometrical method for the singularity analysis of 3-RRR planar parallel robots with different actuation schemes , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  Jens Kotlarski,et al.  On singularity avoidance and workspace enlargement of planar parallel manipulators using kinematic redundancy , 2007 .

[18]  Jean-Pierre Merlet.  The necessity of optimal design for parallel machines and a possible certified methodology , 2005 .

[19]  Damien Chablat,et al.  Singular curves and cusp points in the joint space of 3-RPR parallel manipulators , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[20]  C. Gosselin,et al.  Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms , 2004 .

[21]  Luc Jaulin,et al.  Applied Interval Analysis , 2001, Springer London.

[22]  Ty A. Lasky,et al.  Singularity Avoidance for the 3-RRR Mechanism Using Kinematic Redundancy , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[23]  M. Hiller,et al.  A framework for the analysis, synthesis and optimization of parallel kinematic machines , 2006, ARK.

[24]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .