Analysis of torque ripple and torsional vibration considering Hall mounting errors in permanent magnet synchronous motors for light EVs

[1]  S. Zuo,et al.  Effect of Hall Errors on Electromagnetic Vibration and Noise of Integer-Slot Inset Permanent Magnet Synchronous Motors , 2023, IEEE Transactions on Transportation Electrification.

[2]  S. Zuo,et al.  Separation of Average Torque and Torque Ripple in PMSMs Considering Saturation, Cross-Coupling and Flux Harmonics Using Frozen Permeability Method , 2022, SAE Technical Paper Series.

[3]  S. Datta,et al.  Sensorless vector control of PM synchronous motor by hybrid estimation technique considering effect of non-ideal physical attributes , 2022, Electrical Engineering.

[4]  P. Chaudhary,et al.  Comparative Evaluation of Methods for Continuous Rotor Position Estimation using Low Resolution Hall Sensors , 2021, 2021 National Power Electronics Conference (NPEC).

[5]  P. Pillay,et al.  Mathematical Model of an Interior PMSM With Aligned Magnet and Reluctance Torques , 2020, IEEE Transactions on Transportation Electrification.

[6]  Ming Cheng,et al.  Effects of Magnet Shape on Torque Capability of Surface-Mounted Permanent Magnet Machine for Servo Applications , 2020, IEEE Transactions on Industrial Electronics.

[7]  Zechang Sun,et al.  Interior permanent magnet synchronous motor minimum current harmonics torque ripple suppression strategy based on magnetic co‐energy model , 2020 .

[8]  Narayan C. Kar,et al.  Multiple Reference Frame Based Torque Ripple Minimization for PMSM Drive Under Both Steady-State and Transient Conditions , 2019, IEEE Transactions on Power Electronics.

[9]  Narayan C. Kar,et al.  Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics , 2019, IEEE Transactions on Energy Conversion.

[10]  Gang Liu,et al.  Selective Current Harmonic Suppression for High-Speed PMSM Based on High-Precision Harmonic Detection Method , 2019, IEEE Transactions on Industrial Informatics.

[11]  Luocheng Yan,et al.  Torque ripple suppression of permanent magnet synchronous machines by minimal harmonic current injection , 2019, IET Power Electronics.

[12]  Gang Liu,et al.  High-Precision Speed and Position Estimation Based on Hall Vector Frequency Tracking for PMSM With Bipolar Hall-Effect Sensors , 2019, IEEE Sensors Journal.

[13]  Rik W. De Doncker,et al.  Noise Reduction Via Harmonic Current Injection for Concentrated-Winding Permanent Magnet Synchronous Machines , 2018, 2018 21st International Conference on Electrical Machines and Systems (ICEMS).

[14]  Ralph Kennel,et al.  Implementation and experimental investigation of a sensorless field-oriented control scheme for permanent-magnet synchronous generators , 2018 .

[15]  Shuguang Zuo,et al.  Effects of Rotor Position Error on Longitudinal Vibration of Electric Wheel System in In-Wheel PMSM Driven Vehicle , 2018, IEEE/ASME Transactions on Mechatronics.

[16]  Nisai H. Fuengwarodsakul,et al.  Performance and cost comparison of reluctance motors used for electric bicycles , 2017 .

[17]  Javier Poza,et al.  Extended DQ model of a Permanent Magnet Synchronous Machine by including magnetic saturation and torque ripple effects , 2017, 2017 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics (ECMSM).

[18]  Joon Sung Park,et al.  Online Advanced Angle Adjustment Method for Sinusoidal BLDC Motors with Misaligned Hall Sensors , 2017, IEEE Transactions on Power Electronics.

[19]  Bilal Akin,et al.  Suppression of Dead-Time Distortion Through Revised Repetitive Controller in PMSM Drives , 2017, IEEE Transactions on Energy Conversion.

[20]  Xing Chen,et al.  Modeling of electromagnetic torque considering saturation and magnetic field harmonics in permanent magnet synchronous motor for HEV , 2016, Simul. Model. Pract. Theory.

[21]  Ambrish Chandra,et al.  Effects of Rotor Position Error in the Performance of Field-Oriented-Controlled PMSM Drives for Electric Vehicle Traction Applications , 2016, IEEE Transactions on Industrial Electronics.

[22]  Giuseppe Buja,et al.  Sinusoidal Versus Square-Wave Current Supply of PM Brushless DC Drives: A Convenience Analysis , 2015, IEEE Transactions on Industrial Electronics.

[23]  Dianguo Xu,et al.  Maximum Efficiency Per Ampere Control of Permanent-Magnet Synchronous Machines , 2015, IEEE Transactions on Industrial Electronics.

[24]  Longya Xu,et al.  Characterizing the torque lookup table of an IPM machine for automotive application , 2014, 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific).

[25]  Jianqiu Li,et al.  Driving and braking control of PM synchronous motor based on low-resolution hall sensor for battery electric vehicle , 2013 .

[26]  J. H. Leong,et al.  Analysis and Mitigation of Torsional Vibration of PM Brushless AC/DC Drives With Direct Torque Controller , 2012, IEEE Transactions on Industry Applications.

[27]  Wootaik Lee,et al.  An Improved Rotor Position Estimation With Vector-Tracking Observer in PMSM Drives With Low-Resolution Hall-Effect Sensors , 2011, IEEE Transactions on Industrial Electronics.

[28]  Hui Li,et al.  Compensation of Amplitude Imbalance and Imperfect Quadrature in Resolver Signals for PMSM Drives , 2009, IEEE Transactions on Industry Applications.

[29]  Seung-Ki Sul,et al.  Novel Speed and Rotor Position Estimation Strategy Using a Dual Observer for Low-Resolution Position Sensors , 2009, IEEE Transactions on Power Electronics.

[30]  N. Samoylenko,et al.  Dynamic Performance of Brushless DC Motors With Unbalanced Hall Sensors , 2008, IEEE Transactions on Energy Conversion.

[31]  Damian Giaouris,et al.  Controlled AC Electrical Drives , 2008, IEEE Transactions on Industrial Electronics.

[32]  R.D. Lorenz,et al.  Implementation Issues and Performance Evaluation of Sinusoidal, Surface-Mounted PM Machine Drives With Hall-Effect Position Sensors and a Vector-Tracking Observer , 2008, IEEE Transactions on Industry Applications.

[33]  S.D. Pekarek,et al.  Compensation for Asymmetries and Misalignment in a Hall-Effect Position Observer Used in PMSM Torque-Ripple Control , 2007, IEEE Transactions on Industry Applications.

[34]  O. Honorati,et al.  AC brushless drive with low-resolution Hall-effect sensors for surface-mounted PM Machines , 2006, IEEE Transactions on Industry Applications.

[35]  Shigeo Morimoto,et al.  High-performance current-sensorless drive for PMSM and SynRM with only low-resolution position sensor , 2003 .

[36]  Ronald H. Brown,et al.  Analysis of algorithms for velocity estimation from discrete position versus time data , 1992, IEEE Trans. Ind. Electron..

[37]  2021 IEEE International Workshop of Electronics, Control, Measurement, Signals and their application to Mechatronics (ECMSM) , 2021 .

[38]  Johan Gyselinck,et al.  PMSM Current Shaping for Minimum Joule Losses While Reducing Torque Ripple and Vibrations , 2021, IEEE Access.

[39]  J. Andert,et al.  An FPGA-based Real-time Spatial Harmonics Model of a PMSM Considering Iron Losses and the Thermal Impact , 2021, IEEE Transactions on Transportation Electrification.

[40]  Abraham Gebregergis,et al.  Modeling of Permanent-Magnet Synchronous Machine Including Torque Ripple Effects , 2013, IEEE Transactions on Industry Applications.

[41]  Oskar Wallmark,et al.  Control of a Permanent Magnet Synchronous Motor with Non-Sinusoidal Flux Density Distribution , 2001 .