论文信息 - Characteristic values of the mechanical properties of radiata pine plywood and the derivation of basic values of the layers for a calculation method

Characteristic values of the mechanical properties of radiata pine plywood and the derivation of basic values of the layers for a calculation method

The mechanical properties and characteristic values of radiata pine plywood for structural use were measured using the European standards (EN 789 and EN 1058). Eight different compositions of panels with thicknesses from 9 to 30 mm were tested. Their mechanical properties were found to be similar to those of other plywoods from Europe manufactured with spruce. The test results of plywood showed the mechanical properties of layers (basic values) using the method proposed by European standards. The strength and elasticity modulus of the layers were obtained for bending, tension and compression. It can be concluded that basic values are suitable for estimating the properties of different compositions of plywood.

[1] H. J. Larsen,et al. DS/ENV 1995-1-1 NAD National Application Document for Eurocode 5: Design of Timber Structures, Part 1-1: General Rules and Rules for Buildings , 1994 .

[2] N. Baldassino,et al. Determining mechanical properties and main characteristic values of Poplar plywood by medium-sized test pieces , 1998 .

[3] J. R. Villar,et al. Analysis of the Stress State at the Cogging Joint in Timber Structures , 2007 .

[4] C. Le Govic,et al. Methodological developments in the testing of wood based panels. Part I: Tensile and compression tests , 1994 .