Triaxial ball-impact piezoelectric converter for autonomous sensors exploiting energy harvesting from vibrations and human motion ☆

Abstract A piezoelectric converter for energy harvesting composed of a rigid ball enclosed among six piezoelectric diaphragms arranged in a cube-shaped structure is presented. When the converter is excited by mechanical vibrations, the ball repeatedly bounces and hits one or more diaphragms, implementing the impact technique in a multi-degree-of-freedom configuration. The structure is isotropic thus the converter is effective irrespective of the vibration orientation. The converter is particularly suitable for energy harvesting from low-frequency random vibrations, such as those provided by human motion. The triaxial ball-impact piezoelectric converter was designed, built and experimentally characterized in the laboratory, and then tied to the ankle of a person and tested during physical activity. While the person is running at 7 km/h, a peak instantaneous power of up to 16 mW is provided by each of the six piezoelectric diaphragms, while the average power is significantly lower. The converter was coupled to a tailored power management circuit which intermittently powers a battery-less wearable temperature sensor module. In about 260 s of walking at 2 km/h, an energy of 1.4 mJ is extracted, stored into a 1-mF capacitor, and used to power the sensor module, which performs a temperature measurement and transmits the data to a receiver through a 433-MHz RF-UART link.

[1]  Marco Ferrari,et al.  Battery-less non-contact temperature measurement system powered by energy harvesting from intentional human action , 2015, IET Circuits Devices Syst..

[2]  Marco Ferrari,et al.  Nonlinear Multi-Frequency Converter Array for Vibration Energy Harvesting in Autonomous Sensors , 2012 .

[3]  Bernard H. Stark,et al.  Start-up circuit with low minimum operating power for microwatt energy harvesters , 2011, IET Circuits Devices Syst..

[4]  Paul D. Mitcheson,et al.  Energy harvesting for human wearable and implantable bio-sensors , 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology.

[5]  Marco Ferrari,et al.  Wireless noncontact temperature measurement system powered by intentional human action , 2013, ENSSys '13.

[6]  S. Priya.  Modeling of electric energy harvesting using piezoelectric windmill , 2005 .

[7]  Daniel Mihai Toma,et al.  An ocean kinetic energy converter for low-power applications using piezoelectric disk elements , 2013 .

[8]  Hiroki Kuwano,et al.  3D Vibration Harvesting Using Free Moving Ball PZT Microbox , 2010 .

[9]  Mohammed Ismail,et al.  Characterization of Human Body-Based Thermal and Vibration Energy Harvesting for Wearable Devices , 2014, IEEE Journal on Emerging and Selected Topics in Circuits and Systems.

[10]  Yu-Chuan Su,et al.  Piezoelectric rubber films for autonomous physiological monitoring systems , 2014 .

[11]  Yuta Sakurada,et al.  Energy Harvesting Devices Utilizing Resonance Vibration of Piezoelectric Buzzer (Special Issue : Ferroelectric Materials and Their Applications) , 2013 .

[12]  David P. Arnold,et al.  A compact human-powered energy harvesting system , 2013 .

[13]  Jae Yeong Park,et al.  Theoretical modeling and analysis of mechanical impact driven and frequency up-converted piezoelectric energy harvester for low-frequency and wide-bandwidth operation , 2014 .

[14]  Vittorio Ferrari,et al.  Applied structural and mechanical vibrations - theory, methods and measuring instrumentation , 1999 .

[15]  Ephrahim Garcia,et al.  Passive multi-source energy harvesting schemes , 2012 .

[16]  Marco Ferrari,et al.  A single-magnet nonlinear piezoelectric converter for enhanced energy harvesting from random vibrations ☆ , 2011 .

[17]  Meiling Zhu,et al.  The pizzicato knee-joint energy harvester: characterization with biomechanical data and the effect of backpack load , 2012 .

[18]  Marco Ferrari,et al.  Piezoelectric multifrequency energy converter for power harvesting in autonomous microsystems , 2008 .

[19]  Liter Siek,et al.  Autonomous Wearable Sensor Nodes With Flexible Energy Harvesting , 2014, IEEE Sensors Journal.

[20]  Jinhao Qiu,et al.  Comparison between four piezoelectric energy harvesting circuits , 2009 .

[21]  Ying Zhang,et al.  Analysis of Supercapacitor Energy Loss for Power Management in Environmentally Powered Wireless Sensor Nodes , 2013, IEEE Transactions on Power Electronics.

[22]  Lei Gu,et al.  Compact passively self-tuning energy harvesting for rotating applications , 2011 .

[23]  E Romero,et al.  Energy scavenging sources for biomedical sensors , 2009, Physiological measurement.

[24]  Han Xiao,et al.  A review of piezoelectric vibration energy harvesting techniques , 2014 .

[25]  Jae Eun Kim,et al.  Dedicated algorithm and software for the integrated analysis of AC and DC electrical outputs of piezoelectric vibration energy harvesters , 2014 .

[26]  José Higino Correia,et al.  Electro-optic acquisition system for ECG wearable sensor applications , 2013 .

[27]  M Cueff,et al.  A multi degree of freedom vibration magnetic energy harvester for transport application , 2013 .

[28]  Marco Ferrari,et al.  Trigger Circuits in Battery-less Multi-source Power Management Electronics for Piezoelectric Energy Harvesters☆ , 2014 .

[29]  Paul Lukowicz,et al.  Kinetic energy powered computing - an experimental feasibility study , 2003, Seventh IEEE International Symposium on Wearable Computers, 2003. Proceedings..

[30]  Eric M. Yeatman,et al.  A piezoelectric frequency up-converting energy harvester with rotating proof mass for human body applications , 2014 .

[31]  N. M. White,et al.  Harvesting energy from vehicle wheels , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[32]  Cesare Stefanini,et al.  Piezoelectric Energy Harvesting Solutions , 2014, Sensors.

[33]  Marco Ferrari,et al.  Modeling, fabrication and performance measurements of a piezoelectric energy converter for power harvesting in autonomous microsystems , 2006, 2005 IEEE Instrumentationand Measurement Technology Conference Proceedings.

[34]  Gyuhae Park,et al.  Evaluation of energy harvesting conditioning circuits , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[35]  M. Umeda,et al.  Analysis of the Transformation of Mechanical Impact Energy to Electric Energy Using Piezoelectric Vibrator , 1996 .

[36]  Kwang-Seok Yun,et al.  Piezoelectric shell structures as wearable energy harvesters for effective power generation at low-frequency movement , 2012 .

[37]  Marco Ferrari,et al.  Impact-Enhanced Multi-beam Piezoelectric Converter for Energy Harvesting in Autonomous Sensors , 2012 .

[38]  Alireza Khaligh,et al.  Unconventional wearable energy harvesting from human horizontal foot motion , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[39]  Zhongwei Jiang,et al.  A novel wearable sensor device with conductive fabric and PVDF film for monitoring cardiorespiratory signals , 2006 .

[40]  Marco Ferrari,et al.  Investigation on Electrical Output Combination Options in a Piezoelectric Multifrequency Converter Array for Energy Harvesting in Autonomous Sensors , 2010, 2010 First International Conference on Sensor Device Technologies and Applications.

[41]  S. Baglio,et al.  Improved Energy Harvesting from Wideband Vibrations by Nonlinear Piezoelectric Converters , 2010 .

[42]  Gregory P. Carman,et al.  A broadband vibro-impacting power harvester with symmetrical piezoelectric bimorph-stops , 2011 .

[43]  Jérémie Voix,et al.  Flexible piezoelectric energy harvesting from jaw movements , 2014 .

[44]  Jiamei Jin,et al.  Rotational piezoelectric wind energy harvesting using impact-induced resonance , 2014 .