Enhancing elongation and trading off strength versus ductility of commercially pure titanium sheets using cyclic bending under tension and annealing

[1]  M. Knezevic,et al.  Origins of improved elongation to fracture in cyclic bending under tension of AA6022-T4 sheets as revealed using crystal plasticity modeling , 2023, Mechanics of Materials.

[2]  B. McWilliams,et al.  Correlated structure viscoplastic self-consistent polycrystal plasticity: Application to modeling strain rate sensitive deformation of Ti-6Al-4V , 2023, International Journal of Plasticity.

[3]  S. Vogel,et al.  Cyclic bending under tension of alloy AZ31 sheets: Influence on elongation-to-fracture and strength , 2022, Materials Science and Engineering: A.

[4]  M. Knezevic,et al.  Experimental characterization and crystal plasticity modeling of dual-phase steels subjected to strain path reversals , 2022, Mechanics of Materials.

[5]  D. Fullwood,et al.  Experimental characterization and crystal plasticity modeling for predicting load reversals in AA6016-T4 and AA7021-T79 , 2022, International Journal of Plasticity.

[6]  D. Fullwood,et al.  Multi-strain path deformation behavior of AA6016-T4: Experiments and crystal plasticity modeling , 2022, International Journal of Solids and Structures.

[7]  Nicholas C. Ferreri,et al.  In-situ high-energy X-ray diffraction and crystal plasticity modeling to predict the evolution of texture, twinning, lattice strains and strength during loading and reloading of beryllium , 2022, International Journal of Plasticity.

[8]  I. Beyerlein,et al.  Plasticity and structure evolution of ferrite and martensite in DP 1180 during tension and cyclic bending under tension to large strains , 2021, Materials Science and Engineering: A.

[9]  E. Massoni,et al.  Room-temperature plastic behavior and formability of a commercially pure titanium: Mechanical characterization, modeling, and validation , 2021 .

[10]  M. Knezevic,et al.  Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data , 2021 .

[11]  Jacob L. Moore,et al.  Viscoplastic self-consistent formulation as generalized material model for solid mechanics applications , 2021 .

[12]  Nicholas C. Ferreri,et al.  Thermo-hydrogen refinement of microstructure to improve mechanical properties of Ti–6Al–4V fabricated via laser powder bed fusion , 2021 .

[13]  G. Sha,et al.  Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8Zn-0.2Ca: experiments and crystal plasticity modeling , 2021 .

[14]  R. Lebensohn,et al.  Modeling the role of local crystallographic correlations in microstructures of Ti-6Al-4V using a correlated structure visco-plastic self-consistent polycrystal plasticity formulation , 2021 .

[15]  S. Tamimi,et al.  Mechanical response and microstructure evolution of commercially pure titanium subjected to repetitive bending under tension , 2020, Materials & Design.

[16]  Nicholas C. Ferreri,et al.  Non-acid, alcohol-based electropolishing enables high-quality electron backscatter diffraction characterization of titanium and its alloys: Application to pure Ti and Ti-6Al-4V , 2020 .

[17]  M. Knezevic,et al.  Modeling material behavior during continuous bending under tension for inferring the post-necking strain hardening response of ductile sheet metals: Application to DP 780 steel , 2020 .

[18]  M. Knezevic,et al.  Inferring Post-Necking Strain Hardening Behavior of Sheets by a Combination of Continuous Bending Under Tension Testing and Finite Element Modeling , 2020 .

[19]  B. Kinsey,et al.  Material modeling and simulation of continuous-bending-under-tension of AA6022-T4 , 2020 .

[20]  I. Beyerlein,et al.  Polycrystal plasticity modeling for load reversals in commercially pure titanium , 2020 .

[21]  B. Kinsey,et al.  Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets , 2020 .

[22]  Min-su Lee,et al.  Global and local strain rate sensitivity of commercially pure titanium , 2019, Journal of Alloys and Compounds.

[23]  M. Knezevic,et al.  Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis , 2019, Computer Methods in Applied Mechanics and Engineering.

[24]  I. Beyerlein,et al.  Strengthening of alloy AA6022-T4 by continuous bending under tension , 2019, Materials Science and Engineering: A.

[25]  B. Kinsey,et al.  Experimental study of continuous-bending-under-tension of AA6022-T4 , 2019, Journal of Materials Processing Technology.

[26]  B. Kinsey,et al.  Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension , 2019, Materials & Design.

[27]  T. Jun,et al.  Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning , 2018, Materials Science and Engineering: A.

[28]  Y. Korkolis,et al.  Plastic deformation of commercially-pure titanium: experiments and modeling , 2018, International Journal of Plasticity.

[29]  M. Knezevic,et al.  Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets , 2018, International Journal of Plasticity.

[30]  I. Beyerlein,et al.  Activity of pyramidal I and II slip in Mg alloys as revealed by texture development , 2018 .

[31]  B. Luan,et al.  Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium , 2018 .

[32]  P. Čížek,et al.  Investigation of stress relaxation mechanisms for ductility improvement in SS316L , 2018 .

[33]  R. Mccabe,et al.  Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation , 2017 .

[34]  I. Beyerlein,et al.  Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains , 2017 .

[35]  C. Raemy,et al.  A flexible modelling approach for capturing plastic anisotropy and strength differential effects exhibited by commercially pure titanium , 2017, International Journal of Solids and Structures.

[36]  S. Sinha,et al.  In situ electron backscatter diffraction study of twinning in commercially pure titanium during tension-compression deformation and annealing , 2017 .

[37]  M. Knezevic,et al.  Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4 , 2017 .

[38]  Yannis P. Korkolis,et al.  Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling , 2016 .

[39]  K. Hariharan,et al.  Time dependent ductility improvement of stainless steel SS 316 using stress relaxation , 2016 .

[40]  S. M. Graham,et al.  Modeling the ductile damage process in commercially pure titanium , 2016 .

[41]  I. Beyerlein,et al.  Texture formation in orthorhombic alpha-uranium under simple compression and rolling to high strains , 2016 .

[42]  B. Kinsey,et al.  Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4 , 2016, Materials.

[43]  M. Knezevic,et al.  A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4 , 2015 .

[44]  I. Beyerlein,et al.  Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr , 2015 .

[45]  M. Knezevic,et al.  Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum , 2015, Metallurgical and Materials Transactions A.

[46]  H. Fujimoto,et al.  Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths , 2015 .

[47]  T. Kuwabara,et al.  Identification of Post-Necking Hardening Phenomena in Ductile Sheet Metal , 2014 .

[48]  Frédéric Barlat,et al.  Stress relaxation and its effect on tensile deformation of steels , 2013 .

[49]  Chang-yu Zhou,et al.  An improved constitutive description of tensile behavior for CP-Ti at ambient and intermediate temperatures , 2013 .

[50]  W. Pantleon,et al.  Work-hardening stages and deformation mechanism maps during tensile deformation of commercially pure titanium , 2013 .

[51]  G. Proust,et al.  Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements , 2013 .

[52]  W. C. Emmens,et al.  Material Characterization at High Strain by Adapted Tensile Tests , 2012 .

[53]  C. Fang,et al.  Flow stress behavior of commercial pure titanium sheet during warm tensile deformation , 2012 .

[54]  A. Ekrami,et al.  Effects of rolling reduction on mechanical properties anisotropy of commercially pure titanium , 2012 .

[55]  A. H. van den Boogaard,et al.  Cyclic stretch-bending: Mechanics, stability and formability , 2011 .

[56]  Surya R. Kalidindi,et al.  Deformation twinning in AZ31: Influence on strain hardening and texture evolution , 2010 .

[57]  H. Wenk,et al.  Rietveld texture analysis from TOF neutron diffraction data , 2010, Powder Diffraction.

[58]  C. Rocco,et al.  FE simulation and experimental considerations on TI alloy superplastic forming for aerospace applications , 2010 .

[59]  H. Schaeben,et al.  Texture Analysis with MTEX – Free and Open Source Software Toolbox , 2010 .

[60]  C. Held,et al.  Investigation on the effect of curvature and sheet thickness on forming limit prediction for aluminium sheet metal alloys , 2009 .

[61]  Philip Eyckens,et al.  Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal , 2009 .

[62]  A. H. van den Boogaard,et al.  Incremental forming by continuous bending under tension—An experimental investigation , 2009 .

[63]  Julian M. Allwood,et al.  Generalised forming limit diagrams showing increased forming limits with non-planar stress states , 2009 .

[64]  A. H. van den Boogaard,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2009 .

[65]  K. Manabe,et al.  Ductile fracture behavior of 5052 aluminum alloy sheet under cyclic plastic deformation at room temperature , 2009 .

[66]  Surya R. Kalidindi,et al.  Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution , 2008 .

[67]  Surya R. Kalidindi,et al.  Elastic–plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories , 2007 .

[68]  Surya R. Kalidindi,et al.  Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures , 2007 .

[69]  Alexis M Pietak,et al.  Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.

[70]  M. Tan,et al.  Enhanced superplasticity in commercially pure titanium alloy , 2005 .

[71]  H. Wenk,et al.  Texture analysis with the new HIPPO TOF diffractometer , 2003 .

[72]  F. Barlat,et al.  A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys , 2002 .

[73]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .

[74]  R. Mccabe,et al.  An automated procedure built on MTEX for reconstructing deformation twin hierarchies from electron backscattered diffraction datasets of heavily twinned microstructures , 2021 .

[75]  Christoph Fahrenson,et al.  Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling , 2016, Metallurgical and Materials Transactions A.

[76]  I. Beyerlein,et al.  Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements , 2016 .

[77]  H. Nine.  Drawbead Forces in Sheet Metal Forming , 1978 .