Equivalent-force density method as a shape-finding tool for cable-membrane structures

Abstract Cable-membrane structure is a kind of flexible tension structures, of which both cables and membranes are lack of bending and compressing stiffness. In order to reduce the nonlinearity and the strong coupling between its geometric shape and internal stress distribution to improve the computational efficiency and convergence, this paper developed an equivalent-force density method by identifying the equivalent axial force density and equivalent transversal force density to replace the prestress in triangular and quadrilateral membrane elements. Then the method was applied as a shape-finding tool for cable-membrane structure. Furthermore, several numerical simulations, including planar cable-membrane structure, catenoid and umbrella/tent-like cable-membrane structures, were conducted to confirm the efficiency and robustness of the proposed method.

[1]  Gunnar Tibert,et al.  Deployable Tensegrity Structures for Space Applications , 2002 .

[2]  E. Oñate,et al.  Nonlinear finite element analysis of orthotropic and prestressed membrane structures , 2009 .

[3]  René Motro,et al.  The surface stress density method as a form-finding tool for tensile membranes , 1998 .

[4]  Kent Persson,et al.  Form finding with dynamic relaxation and isogeometric membrane elements , 2016 .

[5]  Roland Wüchner,et al.  Computational methods for form finding and optimization of shells and membranes , 2005 .

[6]  D. J. Gorman,et al.  Investigation of the Stress Distributions in Corner Tensioned Rectangular Membranes , 1993 .

[7]  Paulo M. Pimenta,et al.  The natural force density method for the shape finding of taut structures , 2008 .

[8]  H. Schek.  The force density method for form finding and computation of general networks , 1974 .

[9]  K. Koohestani,et al.  Nonlinear force density method for the form-finding of minimal surface membrane structures , 2014, Commun. Nonlinear Sci. Numer. Simul..

[10]  Landolf Rhode-Barbarigos,et al.  Form finding and analysis of inflatable dams using dynamic relaxation , 2015, Appl. Math. Comput..

[11]  M. R. Barnes,et al.  Form-finding and analysis of prestressed nets and membranes , 1988 .

[12]  L. Mahadevan,et al.  Minimal surfaces bounded by elastic lines , 2011, Proceedings of the Royal Society A.

[13]  Tuanjie Li,et al.  Form Finding of Cable Net Reflector Antennas Considering Creep and Recovery Behaviors , 2016 .

[14]  Masatoshi Shimoda,et al.  A numerical form-finding method for the minimal surface of membrane structures , 2015 .

[15]  Jia Lu,et al.  Solving membrane stress on deformed configuration using inverse elastostatic and forward penalty methods , 2016 .

[16]  Philippe Block,et al.  An overview and comparison of structural form finding methods for general networks , 2012 .

[17]  Hiraku Sakamoto,et al.  Evaluation of membrane structure designs using boundary web cables for uniform tensioning , 2007 .

[18]  Paz Morer,et al.  A multi-step force-density method and surface-fitting approach for the preliminary shape design of tensile structures , 2007 .

[19]  Jie Jiang,et al.  Form-finding methods for deployable mesh reflector antennas , 2013 .

[20]  M. Barnes,et al.  Form Finding and Analysis of Tension Structures by Dynamic Relaxation , 1999 .