Locating multiple partial discharge sources using MAP estimation and ray tracing

[1]  Werner Wiesbeck,et al.  Indoor and outdoor propagation modeling in pico cells , 1994, 5th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, Wireless Networks - Catching the Mobile Future..

[2]  Masatake Kawada,et al.  Localization of a Partial Discharge Source Using Maximum Likelihood Estimation , 2010 .

[3]  N. Cardona,et al.  Comparation between two geometric indoor propagation models: tube-launching vs. ray-launching , 1998, Ninth IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (Cat. No.98TH8361).

[4]  N.J. Davis,et al.  Microcellular radio-channel propagation prediction , 1994, IEEE Antennas and Propagation Magazine.

[5]  Thomas Kailath,et al.  ESPRIT-estimation of signal parameters via rotational invariance techniques , 1989, IEEE Trans. Acoust. Speech Signal Process..

[6]  P.J. Moore,et al.  Radiometric location of partial discharge sources on energized high-Voltage plant , 2005, IEEE Transactions on Power Delivery.

[8]  Surendra Prasad,et al.  An improved spatial smoothing technique for bearing estimation in a multipath environment , 1988, IEEE Trans. Acoust. Speech Signal Process..

[9]  G. Wanninger,et al.  Apparent charge measurement in GIS by modern diagnostic methods , 2007 .

[10]  M.D. Judd,et al.  Partial discharge monitoring for power transformer using UHF sensors. Part 2: field experience , 2005, IEEE Electrical Insulation Magazine.

[12]  M.D. Judd,et al.  Partial discharge monitoring of power transformers using UHF sensors. Part I: sensors and signal interpretation , 2005, IEEE Electrical Insulation Magazine.

[13]  P.J. Moore,et al.  RF-Based Partial Discharge Early Warning System for Air-Insulated Substations , 2009, IEEE Transactions on Power Delivery.