Fabrication of high precision metallic freeform mirrors with magnetorheological finishing (MRF)

The fabrication of complex shaped metal mirrors for optical imaging is a classical application area of diamond machining techniques. Aspherical and freeform shaped optical components up to several 100 mm in diameter can be manufactured with high precision in an acceptable amount of time. However, applications are naturally limited to the infrared spectral region due to scatter losses for shorter wavelengths as a result of the remaining periodic diamond turning structure. Achieving diffraction limited performance in the visible spectrum demands for the application of additional polishing steps. Magnetorheological Finishing (MRF) is a powerful tool to improve figure and finish of complex shaped optics at the same time in a single processing step. The application of MRF as a figuring tool for precise metal mirrors is a nontrivial task since the technology was primarily developed for figuring and finishing a variety of other optical materials, such as glasses or glass ceramics. In the presented work, MRF is used as a figuring tool for diamond turned aluminum lightweight mirrors with electroless nickel plating. It is applied as a direct follow-up process after diamond machining of the mirrors. A high precision measurement setup, composed of an interferometer and an advanced Computer Generated Hologram with additional alignment features, allows for precise metrology of the freeform shaped optics in short measuring cycles. Shape deviations less than 150 nm PV / 20 nm rms are achieved reliably for freeform mirrors with apertures of more than 300 mm. Characterization of removable and induced spatial frequencies is carried out by investigating the Power Spectral Density.

[1]  M. Rohde,et al.  Metal mirrors with excellent figure and roughness , 2008, Optical Systems Design.

[2]  Ramon Navarro,et al.  Directly polished lightweight aluminum mirror , 2008, Astronomical Telescopes + Instrumentation.

[3]  D. C. Harris,et al.  History of magnetorheological finishing , 2011, Defense + Commercial Sensing.

[4]  John P. Schaefer.  Advanced metal mirror processing for tactical ISR systems , 2013, Defense, Security, and Sensing.

[5]  J. Bennett,et al.  Calculation of the power spectral density from surface profile data. , 1995, Applied optics.

[6]  Stefan Risse,et al.  Freeform mirror fabrication and metrology using a high performance test CGH and advanced alignment features , 2013, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[7]  Tony Hull,et al.  Mid-spatial frequency matters: examples of the control of the power spectral density and what that means to the performance of imaging systems , 2012, Defense + Commercial Sensing.

[8]  William Kordonski,et al.  Magnetorheological finishing (MRF) in commercial precision optics manufacturing , 1999, Optics + Photonics.

[9]  Daniel M. Sykora,et al.  Dynamic measurements using a Fizeau interferometer , 2011, Optical Metrology.

[10]  S. R. Wilson,et al.  Neutral Ion Beam Figuring Of Large Optical Surfaces , 1987, Optics & Photonics.

[11]  Bob Hallock,et al.  Improving surface figure and microroughness of IR materials and diamond turned surfaces with magnetorheological finishing (MRF) , 2007, SPIE Defense + Commercial Sensing.

[12]  Bob Hallock,et al.  Complete sub-aperture pre-polishing and finishing solution to improve speed and determinism in asphere manufacture , 2007, SPIE Optical Engineering + Applications.

[13]  Paul E. Murphy,et al.  Asphere metrology using variable optical null technology , 2012, Other Conferences.

[14]  Thomas G. Bifano,et al.  Contouring algorithm for ion figuring , 1995 .

[15]  Kevin Moeggenborg,et al.  Low-scatter bare aluminum optics via chemical mechanical polishing , 2008, Optical Engineering + Applications.

[16]  Peter de Groot,et al.  Instantaneous measurement Fizeau interferometer with high spatial resolution , 2011, Optical Engineering + Applications.

[17]  J. Tukey,et al.  An algorithm for the machine calculation of complex Fourier series , 1965 .

[18]  Don Golini,et al.  Improvement of figure and finish of diamond turned surfaces with magneto-rheological finishing (MRF) , 2005, SPIE Defense + Commercial Sensing.

[19]  Stephen D. Jacobs,et al.  Details of the polishing spot in magnetorheological finishing (MRF) , 1999, Optics + Photonics.

[20]  Simon G. Alcock,et al.  Using the power spectral density method to characterise the surface topography of optical surfaces , 2010, Optical Engineering + Applications.

[21]  Fritz Klocke,et al.  Material Removal Mechanisms in Lapping and Polishing , 2003 .

[22]  L. Lucy.  An iterative technique for the rectification of observed distributions , 1974 .

[23]  Tai Sheng Wang,et al.  Dwell time algorithm in ion beam figuring. , 2009, Applied optics.

[24]  Wolfgang Osten,et al.  Advanced studies on the measurement of aspheres and freeform surfaces with the tilted-wave interferometer , 2011, Optical Metrology.

[25]  J. E. Harvey,et al.  Modeling of light scattering in different regimes of surface roughness. , 2011, Optics express.

[26]  Michael Kuchel.  Interferometric measurement of rotationally symmetric aspheric surfaces , 2007 .

[27]  William H. Richardson,et al.  Bayesian-Based Iterative Method of Image Restoration , 1972 .

[28]  Richard N. Youngworth,et al.  An overview of power spectral density (PSD) calculations , 2005, SPIE Optics + Photonics.

[29]  Daniel Vukobratovich,et al.  Large stable aluminum optics for aerospace applications , 2011, Optical Engineering + Applications.

[30]  R. Eberhardt,et al.  Novel TMA telescope based on ultra precise metal mirrors , 2008, Astronomical Telescopes + Instrumentation.

[31]  Ralf-Rainer Rohloff,et al.  A novel athermal approach for high-performance cryogenic metal optics , 2010, Astronomical Telescopes + Instrumentation.

[32]  A. Duparré,et al.  Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components. , 2002, Applied optics.