A Novel Ultra-Lightweight Multiband Rectenna on Paper for RF Energy Harvesting in the Next Generation LTE Bands

This paper introduces a novel compact ultralightweight multiband RF energy harvester fabricated on a paper substrate. The proposed rectenna is designed to operate in all recently released LTE bands (range 0.79–0.96 GHz; 1.71–2.17 GHz; and 2.5–2.69 GHz). High compactness and ease of integration between antenna and rectifier are achieved by using a topology of nested annular slots. The proposed rectifier features an RF-to-dc conversion efficiency in the range of 5%–16% for an available input power of −20 dBm in all bands of interest, which increases up to 11%–30% at −15 dBm. The rectenna has been finally tested both in laboratory and in realistic scenarios featuring a superior performance to other state-of-the-art RF harvesters on flexible substrates.

[1]  L. Roselli,et al.  Design of a ultra-compact low-power rectenna in paper substrate for energy harvesting in the Wi-Fi band , 2016, 2016 IEEE Wireless Power Transfer Conference (WPTC).

[2]  Kin-Fai Tong,et al.  Wideband single-fed proximity coupled circularly polarised annular slot antenna , 2010 .

[3]  Veronique Kuhn,et al.  A Multi-Band Stacked RF Energy Harvester With RF-to-DC Efficiency Up to 84% , 2015, IEEE Transactions on Microwave Theory and Techniques.

[4]  Yong-Woong Jang,et al.  Experimental study of wideband printed annular slot antenna with cross-shaped feedline , 2002 .

[5]  Bruno Allard,et al.  Efficient design of rectifying antennas for low power detection , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[6]  Apostolos Georgiadis,et al.  A UHF rectifier with one octave bandwidth based on a non-uniform transmission line , 2016, 2016 IEEE MTT-S International Microwave Symposium (IMS).

[7]  Manos M. Tentzeris,et al.  Ambient RF Energy-Harvesting Technologies for Self-Sustainable Standalone Wireless Sensor Platforms , 2014, Proceedings of the IEEE.

[8]  H. Morishita,et al.  Analysis of a cavity-backed annular slot antenna with one point shorted , 1991 .

[9]  Alessandra Costanzo,et al.  A fully-autonomous integrated rf energy harvesting system for wearable applications , 2013, 2013 European Microwave Conference.

[10]  Zoya Popovic,et al.  A harmonically-terminated two-gram low-power rectenna on a flexible substrate , 2013, 2013 IEEE Wireless Power Transfer (WPT).

[11]  G. Monti,et al.  UHF Wearable Rectenna on Textile Materials , 2013, IEEE Transactions on Antennas and Propagation.

[12]  P. D. Mitcheson,et al.  Ambient RF Energy Harvesting in Urban and Semi-Urban Environments , 2013, IEEE Transactions on Microwave Theory and Techniques.

[13]  M. Tentzeris,et al.  A Compact Dual-Band Rectenna Using Slot-Loaded Dual Band Folded Dipole Antenna , 2013, IEEE Antennas and Wireless Propagation Letters.

[14]  Vivek Subramanian,et al.  Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices , 2005, Proceedings of the IEEE.

[15]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[16]  Tan-Phu Vuong,et al.  Compact Rectenna Design for Lossy Paper Substrate at 2.45 GHz , 2016 .

[17]  Anantha P. Chandrakasan,et al.  A 1.1 nW Energy-Harvesting System with 544 pW Quiescent Power for Next-Generation Implants , 2014, IEEE Journal of Solid-State Circuits.

[18]  Giulia Orecchini,et al.  Low-Power Frequency Doubler in Cellulose-Based Materials for Harmonic RFID Applications , 2014, IEEE Microwave and Wireless Components Letters.

[19]  Apostolos Georgiadis,et al.  Conformal Hybrid Solar and Electromagnetic (EM) Energy Harvesting Rectenna , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[20]  Alessandra Costanzo,et al.  CAD of multi-resonator rectenna for micro-power generation , 2009, 2009 European Microwave Integrated Circuits Conference (EuMIC).

[21]  Minho Jo,et al.  Cooperative Wireless Energy Harvesting and Spectrum Sharing in 5G Networks , 2016, IEEE Access.

[22]  L. Roselli,et al.  Modeling and characterization of copper tape microstrips on paper substrate and application to 24 GHz branch-line couplers , 2013, 2013 European Microwave Conference.

[23]  Thierry Taris,et al.  A dual band 915MHz/2.44GHz RF energy harvester , 2015, 2015 European Microwave Conference (EuMC).

[24]  Y. Kawahara,et al.  E-WEHP: A Batteryless Embedded Sensor-Platform Wirelessly Powered From Ambient Digital-TV Signals , 2013, IEEE Transactions on Microwave Theory and Techniques.

[25]  L. Roselli,et al.  Review of the present technologies concurrently contributing to the implementation of the Internet of Things (IoT) paradigm: RFID, Green Electronics, WPT and Energy Harvesting , 2015, 2015 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet).

[26]  Alessandra Costanzo,et al.  Genetic-based design of a tetra-band high-efficiency radio-frequency energy harvesting system , 2013 .

[27]  L. Roselli,et al.  Performance analysis of a ultra-compact low-power rectenna in paper substrate for RF energy harvesting , 2017, 2017 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet).

[28]  Zheng Zhong,et al.  Enhanced Dual-Band Ambient RF Energy Harvesting With Ultra-Wide Power Range , 2015, IEEE Microwave and Wireless Components Letters.

[29]  Marco Dionigi,et al.  Microwave Circuits in Paper Substrates Exploiting Conductive Adhesive Tapes , 2012, IEEE Microwave and Wireless Components Letters.

[30]  Bo Zhai,et al.  Exploring Variability and Performance in a Sub-200-mV Processor , 2008, IEEE Journal of Solid-State Circuits.

[31]  Yong-xin Guo,et al.  A Dual-Band Rectenna Using Broadband Yagi Antenna Array for Ambient RF Power Harvesting , 2013, IEEE Antennas and Wireless Propagation Letters.

[32]  A. J. Steckl,et al.  Circuits on cellulose , 2013, IEEE Spectrum.

[33]  Giulia Orecchini,et al.  A novel compact harmonic RFID sensor in paper substrate based on a variable attenuator and nested antennas , 2016, 2016 IEEE MTT-S International Microwave Symposium (IMS).

[34]  Anh-Vu Pham,et al.  Triple bands antenna and high efficiency rectifier design for RF energy harvesting at 900, 1900 and 2400 MHz , 2013, 2013 IEEE MTT-S International Microwave Symposium Digest (MTT).

[35]  Li Yang,et al.  Inkjet Printed, Self Powered, Wireless Sensors for Environmental, Gas, and Authentication-Based Sensing , 2011, IEEE Sensors Journal.

[36]  C. R. Valenta,et al.  Rectenna performance under power-optimized waveform excitation , 2013, 2013 IEEE International Conference on RFID (RFID).

[37]  Anantha Chandrakasan,et al.  23.2 A 1.1nW energy harvesting system with 544pW quiescent power for next-generation implants , 2014, 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC).

[38]  Ke Wu,et al.  Physical Mechanism and Theoretical Foundation of Ambient RF Power Harvesting Using Zero-Bias Diodes , 2016, IEEE Transactions on Microwave Theory and Techniques.