A multi-band antenna suitable for Long-term Evolution (LTE) is shaped around a 3D printed cylindrical form, and arranged in a MIMO configuration. The antenna is based on a planar wideband monopole radiator with an additional resonator for the LTE700 frequency band. Conforming the antenna onto a cylindrical shape reduces its length while keeping performance. It also reduces the space used by the MIMO antenna system. Furthermore, the plastic cylinder improves the mechanical strength of the supporting substrate for the radiating element. The aim is to study the potential of additive manufacturing (AM) of substrates for the development of conformal vehicular antenna. Two antennas have been fabricated, one etched on a copper clad Mylar substrate, and a second painted directly onto the cylindrical form. The two antennas have been measured and the results are compared. Two copper based antennas have been tested in a MIMO configuration. The antennas successfully operate at all LTE and mobile frequency bands. Finite different time domain simulations compare well with measurements.
[1]
Benito Sanz-Izquierdo,et al.
3D printing technique for fabrication of frequency selective structures for built environment
,
2013
.
[2]
B. Sanz-Izquierdo,et al.
Frequency selective surfaces formed by partially metalising 3D printed shapes
,
2015,
2015 9th European Conference on Antennas and Propagation (EuCAP).
[3]
R. Leelaratne,et al.
Multiband PIFA vehicle telematics antennas
,
2005,
IEEE Transactions on Vehicular Technology.
[4]
W. Marsden.
I and J
,
2012
.
[5]
L. Ekiz,et al.
Automotive grade MIMO antenna setup and performance evaluation for LTE-communications
,
2013,
2013 International Workshop on Antenna Technology (iWAT).
[6]
W. Wiesbeck,et al.
Ultra-broadband car antennas for communications and navigation applications
,
2003
.