All oxide semiconductor-based bidirectional vertical p-n-p selectors for 3D stackable crossbar-array electronics

Three-dimensional (3D) stackable memory devices including nano-scaled crossbar array are central for the realization of high-density non-volatile memory electronics. However, an essential sneak path issue affecting device performance in crossbar array remains a bottleneck and a grand challenge. Therefore, a suitable bidirectional selector as a two-way switch is required to facilitate a major breakthrough in the 3D crossbar array memory devices. Here, we show the excellent selectivity of all oxide p-/n-type semiconductor-based p-n-p open-based bipolar junction transistors as selectors in crossbar memory array. We report that bidirectional nonlinear characteristics of oxide p-n-p junctions can be highly enhanced by manipulating p-/n-type oxide semiconductor characteristics. We also propose an associated Zener tunneling mechanism that explains the unique features of our p-n-p selector. Our experimental findings are further extended to confirm the profound functionality of oxide p-n-p selectors integrated with several bipolar resistive switching memory elements working as storage nodes.

[1]  H. Hamann,et al.  Ultra-high-density phase-change storage and memory , 2006, Nature materials.

[2]  Wei Lu,et al.  Latch-up based bidirectional npn selector for bipolar resistance-change memory , 2013 .

[3]  T.G. Noll,et al.  Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory , 2007, ESSCIRC 2007 - 33rd European Solid-State Circuits Conference.

[4]  A. Sawa.  Resistive switching in transition metal oxides , 2008 .

[5]  Charles R. Szmanda,et al.  Programmable polymer thin film and non-volatile memory device , 2004, Nature materials.

[6]  J. Yang,et al.  A Family of Electronically Reconfigurable Nanodevices , 2009 .

[7]  M. R. Uddin,et al.  A plasma-treated chalcogenide switch device for stackable scalable 3D nanoscale memory , 2013, Nature Communications.

[8]  K. Virwani,et al.  Sub-30nm scaling and high-speed operation of fully-confined Access-Devices for 3D crosspoint memory based on mixed-ionic-electronic-conduction (MIEC) materials , 2012, 2012 International Electron Devices Meeting.

[9]  Tuo-Hung Hou,et al.  Dependence of Read Margin on Pull-Up Schemes in High-Density One Selector–One Resistor Crossbar Array , 2013, IEEE Transactions on Electron Devices.

[10]  I. Yoo,et al.  2-stack 1D-1R Cross-point Structure with Oxide Diodes as Switch Elements for High Density Resistance RAM Applications , 2007, 2007 IEEE International Electron Devices Meeting.

[11]  Sungho Kim,et al.  Structure Effects on Resistive Switching of $ \hbox{Al/TiO}_{x}/\hbox{Al}$ Devices for RRAM Applications , 2008, IEEE Electron Device Letters.

[12]  Gregory S. Snider,et al.  ‘Memristive’ switches enable ‘stateful’ logic operations via material implication , 2010, Nature.

[13]  Tuo-Hung Hou,et al.  Bipolar Nonlinear $\hbox{Ni/TiO}_{2}\hbox{/}\hbox{Ni}$ Selector for 1S1R Crossbar Array Applications , 2011, IEEE Electron Device Letters.

[14]  Yingtao Li,et al.  A new bipolar RRAM selector based on anti-parallel connected diodes for crossbar applications. , 2014, Nanotechnology.

[15]  Jung-Hyun Lee,et al.  Electrical manipulation of nanofilaments in transition-metal oxides for resistance-based memory. , 2009, Nano letters.

[16]  S. H. Jeon,et al.  A Low‐Temperature‐Grown Oxide Diode as a New Switch Element for High‐Density, Nonvolatile Memories , 2007 .

[17]  Lei Xu,et al.  Co3O4 Nanomaterials in Lithium‐Ion Batteries and Gas Sensors , 2005 .

[18]  Jiale Liang,et al.  Cross-Point Memory Array Without Cell Selectors—Device Characteristics and Data Storage Pattern Dependencies , 2010, IEEE Transactions on Electron Devices.

[19]  R. van der Toorn,et al.  Compact model of Zener tunneling current in bipolar transistors featuring a smooth transition to zero forward bias current , 2009, 2009 IEEE Bipolar/BiCMOS Circuits and Technology Meeting.

[20]  I. Baek,et al.  High‐Current‐Density CuO x/InZnOx Thin‐Film Diodes for Cross‐Point Memory Applications , 2008 .

[21]  Tri-Rung Yew,et al.  ZnO-based one diode-one resistor device structure for crossbar memory applications , 2012 .

[22]  Jea-Gun Park,et al.  Oxygen Ion Drift‐Induced Complementary Resistive Switching in Homo TiOx/TiOy/TiOx and Hetero TiOx/TiON/TiOx Triple Multilayer Frameworks , 2012 .

[23]  Sergio Daolio,et al.  Composition and Microstructure of Cobalt Oxide Thin Films Obtained from a Novel Cobalt(II) Precursor by Chemical Vapor Deposition , 2001 .

[24]  C. Lokhande,et al.  Preparation and characterization of spray pyrolysed cobalt oxide thin films , 1996 .

[25]  Young-soo Park,et al.  Low‐Temperature‐Grown Transition Metal Oxide Based Storage Materials and Oxide Transistors for High‐Density Non‐volatile Memory , 2009 .

[26]  Matthew D. Pickett,et al.  Two‐ and Three‐Terminal Resistive Switches: Nanometer‐Scale Memristors and Memistors , 2011 .

[27]  Hyunsang Hwang,et al.  Self-Selective Characteristics of Nanoscale $ \hbox{VO}_{x}$ Devices for High-Density ReRAM Applications , 2012, IEEE Electron Device Letters.

[28]  C. Araújo,et al.  Optical and structural characterization of iron oxide and cobalt oxide thin films at 800 nm , 2013 .

[29]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[30]  H. Ohno,et al.  A perpendicular-anisotropy CoFeB-MgO magnetic tunnel junction. , 2010, Nature materials.

[31]  H. Mizoguchi,et al.  Electrical Properties and Structure of p‐Type Amorphous Oxide Semiconductor xZnO·Rh2O3 , 2005 .

[32]  Rainer Waser,et al.  Complementary resistive switches for passive nanocrossbar memories. , 2010, Nature materials.

[33]  L. Kavan,et al.  Electrochemical charging of individual single-walled carbon nanotubes. , 2009, ACS nano.

[34]  Shimeng Yu,et al.  HfOx-based vertical resistive switching random access memory suitable for bit-cost-effective three-dimensional cross-point architecture. , 2013, ACS nano.

[35]  Yuanjie Li,et al.  Power and gas pressure effects on properties of amorphous In–Ga–ZnO films by magnetron sputtering , 2012, Journal of Materials Science: Materials in Electronics.

[36]  H. Hwang,et al.  High current density and nonlinearity combination of selection device based on TaO(x)/TiO2/TaO(x) structure for one selector-one resistor arrays. , 2012, ACS nano.

[37]  Young Soo Yoon,et al.  Electrochemical and structural properties of radio frequency sputtered cobalt oxide electrodes for thin-film supercapacitors , 2001 .

[38]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.