Structure and design of polymers for durable, stretchable organic electronics

[1]  T. B. Carmichael,et al.  Reinventing Butyl Rubber for Stretchable Electronics , 2016 .

[2]  T. Trung,et al.  Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare , 2016, Advanced materials.

[3]  Huanli Dong,et al.  Charge Transport in Organic and Polymeric Semiconductors for Flexible and Stretchable Devices , 2016, Advanced materials.

[4]  Unyong Jeong,et al.  Conducting Polymer Dough for Deformable Electronics , 2016, Advanced materials.

[5]  O. Awartani,et al.  Microstructural behavior and failure mechanisms of organic semicrystalline thin film blends , 2016 .

[6]  S. P. Tiwari,et al.  Crystallinity and performance improvement in solution processed organic field-effect transistors due to structural dissimilarity of the additive solvent , 2016 .

[7]  F. Krebs,et al.  Mechanical Properties of a Library of Low-Band-Gap Polymers , 2016 .

[8]  B. Sumpter,et al.  Harnessing Structure–Property Relationshipsfor Poly(alkyl thiophene)–Fullerene Derivative Thin Filmsto Optimize Performance in Photovoltaic Devices , 2016 .

[9]  E. Reichmanis,et al.  Elastomer-Polymer Semiconductor Blends for High-Performance Stretchable Charge Transport Networks , 2016 .

[10]  Q. Pei,et al.  Flexible and stretchable electrodes for next generation polymer electronics: a review , 2016, Science China Chemistry.

[11]  Hyun Ho Choi,et al.  Stretchable and Transparent Organic Semiconducting Thin Film with Conjugated Polymer Nanowires Embedded in an Elastomeric Matrix , 2016 .

[12]  Taek‐Soo Kim,et al.  Simultaneously Enhancing the Cohesion and Electrical Conductivity of PEDOT:PSS Conductive Polymer Films using DMSO Additives. , 2015, ACS applied materials & interfaces.

[13]  Xinge Yu,et al.  Solvent-dependent electrical properties improvement of organic field-effect transistor based on disordered conjugated polymer/insulator blends , 2015 .

[14]  J. Choi,et al.  Anomalous Stretchable Conductivity Using an Engineered Tricot Weave. , 2015, ACS nano.

[15]  Byeong Wan An,et al.  Stretchable and transparent electrodes based on in-plane structures. , 2015, Nanoscale.

[16]  Jianyong Ouyang,et al.  Stretchable and Conductive Polymer Films Prepared by Solution Blending. , 2015, ACS applied materials & interfaces.

[17]  J. Seppälä,et al.  Interdiffusion and Spinodal Decomposition in Electrically Conducting Polymer Blends , 2015 .

[18]  I. Osaka,et al.  On the role of local charge carrier mobility in the charge separation mechanism of organic photovoltaics. , 2015, Physical chemistry chemical physics : PCCP.

[19]  Jean-Luc Brédas,et al.  Entanglements in P3HT and their influence on thin-film mechanical properties: Insights from molecular dynamics simulations , 2015 .

[20]  K. A. Mazzio,et al.  Effect of Regioregularity on Charge Transport and Structural and Excitonic Coherence in Poly(3-hexylthiophene) Nanowires , 2015 .

[21]  C. McNeill,et al.  In-Depth Understanding of the Morphology-Performance Relationship in Polymer Solar Cells. , 2015, ACS applied materials & interfaces.

[22]  Joon Hak Oh,et al.  Tuning Mechanical and Optoelectrical Properties of Poly(3-hexylthiophene) through Systematic Regioregularity Control , 2015 .

[23]  Wenyong Lai,et al.  Stretchable Thin‐Film Electrodes for Flexible Electronics with High Deformability and Stretchability , 2015, Advanced materials.

[24]  Darren J. Lipomi,et al.  Viability of stretchable poly(3-heptylthiophene) (P3HpT) for organic solar cells and field-effect transistors , 2015 .

[25]  Hongbo Lu,et al.  An ABA triblock copolymer strategy for intrinsically stretchable semiconductors , 2015 .

[26]  Er Qiang Li,et al.  Semi-metallic, strong and stretchable wet-spun conjugated polymer microfibers , 2015 .

[27]  G. Desiraju,et al.  Designing elastic organic crystals: highly flexible polyhalogenated N-benzylideneanilines. , 2015, Angewandte Chemie.

[28]  Bumjoon J. Kim,et al.  Determining the role of polymer molecular weight for high-performance all-polymer solar cells: its effect on polymer aggregation and phase separation. , 2015, Journal of the American Chemical Society.

[29]  Kyung‐Eun Byun,et al.  Polythiophene Nanofibril Bundles Surface‐Embedded in Elastomer: A Route to a Highly Stretchable Active Channel Layer , 2015, Advanced materials.

[30]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[31]  Timothy M. Burke,et al.  Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity , 2014 .

[32]  Ayesha Kausar.  Design, synthesis and physical properties of poly(styrene-butadiene-styrene)/poly(thiourea-azo-sulfone) blends , 2014, Bulletin of Materials Science.

[33]  X. Tao,et al.  Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications , 2014, Advanced materials.

[34]  Richard R. Lunt,et al.  Near‐Infrared Harvesting Transparent Luminescent Solar Concentrators , 2014 .

[35]  Timothy O'Connor,et al.  Molecularly Stretchable Electronics , 2014 .

[36]  Jong-Hyun Ahn,et al.  Effect of PEDOT Nanofibril Networks on the Conductivity, Flexibility, and Coatability of PEDOT:PSS Films. , 2014, ACS applied materials & interfaces.

[37]  Daniel J. Burke,et al.  Increased elasticity of a low-bandgap conjugated copolymer by random segmentation for mechanically robust solar cells , 2014 .

[38]  Darren J. Lipomi,et al.  Best of Both Worlds: Conjugated Polymers Exhibiting Good Photovoltaic Behavior and High Tensile Elasticity , 2014 .

[39]  K. A. Knauer,et al.  Systematic reliability study of top-gate p- and n-channel organic field-effect transistors. , 2014, ACS applied materials & interfaces.

[40]  Daniel J. Burke,et al.  Mechanical Properties of Conjugated Polymers and Polymer‐Fullerene Composites as a Function of Molecular Structure , 2014 .

[41]  Christopher Bruner,et al.  Role of Molecular Weight on the Mechanical Device Properties of Organic Polymer Solar Cells , 2014 .

[42]  Zhenan Bao,et al.  Side Chain Engineering in Solution-Processable Conjugated Polymers , 2014 .

[43]  Mufang Li,et al.  Stretchable conductive polypyrrole/polyurethane (PPy/PU) strain sensor with netlike microcracks for human breath detection. , 2014, ACS applied materials & interfaces.

[44]  Christopher J. Tassone,et al.  Enhanced solid-state order and field-effect hole mobility through control of nanoscale polymer aggregation. , 2013, Journal of the American Chemical Society.

[45]  Benjamin C. K. Tee,et al.  25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress , 2013, Advanced materials.

[46]  Zhenan Bao,et al.  Light-emitting electronic skin , 2013, Nature Photonics.

[47]  A. Bonfiglio,et al.  Organic Bendable and Stretchable Field Effect Devices for Sensing Applications , 2013, IEEE Sensors Journal.

[48]  Christopher Bruner,et al.  Molecular Intercalation and Cohesion of Organic Bulk Heterojunction Photovoltaic Devices , 2013 .

[49]  N. Koch,et al.  Moderate doping leads to high performance of semiconductor/insulator polymer blend transistors , 2013, Nature Communications.

[50]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[51]  Zhenan Bao,et al.  Toward mechanically robust and intrinsically stretchable organic solar cells: Evolution of photovoltaic properties with tensile strain , 2012 .

[52]  M. Toney,et al.  Factors Governing Intercalation of Fullerenes and Other Small Molecules Between the Side Chains of Semiconducting Polymers Used in Solar Cells , 2012 .

[53]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[54]  Benjamin C. K. Tee,et al.  Transparent, Optical, Pressure‐Sensitive Artificial Skin for Large‐Area Stretchable Electronics , 2012, Advanced materials.

[55]  P. Blom,et al.  Degradation mechanisms in organic photovoltaic devices , 2012 .

[56]  Alex K.-Y. Jen,et al.  Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells , 2012 .

[57]  Yang Yang,et al.  Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer , 2012, Nature Photonics.

[58]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[59]  Marco R. Cavallari,et al.  Determination of carrier mobility in MEH-PPV thin-films by stationary and transient current techniques , 2012 .

[60]  Christopher R. McNeill,et al.  Morphology of all-polymer solar cells , 2012 .

[61]  Zhenan Bao,et al.  Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes , 2012 .

[62]  M. Toney,et al.  Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells. , 2012, Journal of the American Chemical Society.

[63]  Zhenan Bao,et al.  Mechanistic Considerations of Bending‐Strain Effects within Organic Semiconductors on Polymer Dielectrics , 2012 .

[64]  Benjamin C. K. Tee,et al.  Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates , 2012 .

[65]  M. Kaltenbrunner,et al.  Ultrathin and lightweight organic solar cells with high flexibility , 2012, Nature Communications.

[66]  Hee Taek Yi,et al.  Ultra-flexible solution-processed organic field-effect transistors , 2012, Nature Communications.

[67]  Lee J. Richter,et al.  Anisotropic Structure and Charge Transport in Highly Strain‐Aligned Regioregular Poly(3‐hexylthiophene) , 2011 .

[68]  Hae-A-Seul Shin,et al.  Electrical failure and damage analysis of multi-layer metal films on flexible substrate during cyclic bending deformation , 2011, 18th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA).

[69]  A. Saeki,et al.  Direct Evaluation of Intrinsic Optoelectronic Performance of Organic Photovoltaic Cells with Minimizing Impurity and Degradation Effects , 2011 .

[70]  Benjamin C. K. Tee,et al.  Stretchable Organic Solar Cells , 2011, Advanced materials.

[71]  Wen‐Chang Chen,et al.  Manipulation on the Morphology and Electrical Properties of Aligned Electrospun Nanofibers of Poly(3-hexylthiophene) for Field-Effect Transistor Applications , 2011 .

[72]  A. Donald,et al.  A Phase Diagram of the P3HT:PCBM Organic Photovoltaic System: Implications for Device Processing and Performance , 2011 .

[73]  G. Wallace,et al.  Highly Stretchable Conducting SIBS‐P3HT Fibers , 2011 .

[74]  Zheng Jia,et al.  Failure mechanics of organic–inorganic multilayer permeation barriers in flexible electronics , 2011 .

[75]  Christopher M. Stafford,et al.  Surface Wrinkling: A Versatile Platform for Measuring Thin‐Film Properties , 2011, Advanced materials.

[76]  M. Thelakkat,et al.  High Crystallinity and Nature of Crystal−Crystal Phase Transformations in Regioregular Poly(3-hexylthiophene) , 2010 .

[77]  R. Segalman,et al.  Tuning Polythiophene Crystallization through Systematic Side Chain Functionalization , 2010 .

[78]  R. J. Kline,et al.  Correlations between mechanical and electrical properties of polythiophenes. , 2010, ACS nano.

[79]  A. Facchetti,et al.  Bulk Electron Transport and Charge Injection in a High Mobility n‐Type Semiconducting Polymer , 2010, Advanced materials.

[80]  R. Gysel,et al.  Effects of Intercalation on the Hole Mobility of Amorphous Semiconducting Polymer Blends , 2010 .

[81]  Jan Fyenbo,et al.  Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative , 2010 .

[82]  Yonggang Huang,et al.  Materials and Mechanics for Stretchable Electronics , 2010, Science.

[83]  S. Jenekhe,et al.  Enhanced Performance of Bulk Heterojunction Solar Cells Using Block Copoly(3-alkylthiophene)s , 2010 .

[84]  Zhengguo Zhu,et al.  Influence of the Bridging Atom on the Performance of a Low‐Bandgap Bulk Heterojunction Solar Cell , 2010, Advanced materials.

[85]  John A Rogers,et al.  Optimized structural designs for stretchable silicon integrated circuits. , 2009, Small.

[86]  Tae-Wook Kim,et al.  Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells , 2009 .

[87]  S. Jenekhe,et al.  Regioregular Poly(3-pentylthiophene): Synthesis, Self-Assembly of Nanowires, High-Mobility Field-Effect Transistors, and Efficient Photovoltaic Cells , 2009 .

[88]  M. Toney,et al.  Tuning the properties of polymer bulk heterojunction solar cells by adjusting fullerene size to control intercalation. , 2009, Nano letters.

[89]  Wi Hyoung Lee,et al.  Organic Thin-Film Transistors Based on Blends of Poly(3-hexylthiophene) and Polystyrene with a Solubility-Induced Low Percolation Threshold , 2009 .

[90]  Dongha Tahk,et al.  Elastic Moduli of Organic Electronic Materials by the Buckling Method , 2009 .

[91]  T. Someya,et al.  Stretchable active-matrix organic light-emitting diode display using printable elastic conductors. , 2009, Nature materials.

[92]  John A. Rogers,et al.  Mechanical Buckling: Mechanics, Metrology, and Stretchable Electronics , 2009 .

[93]  Christoph J. Brabec,et al.  Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells , 2009 .

[94]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[95]  I. Shimoyama,et al.  Stretchable Yarn of Display Elements , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.

[96]  Yonggang Huang,et al.  Materials and noncoplanar mesh designs for integrated circuits with linear elastic responses to extreme mechanical deformations , 2008, Proceedings of the National Academy of Sciences.

[97]  Bumjoon J. Kim,et al.  The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance. , 2008, Journal of the American Chemical Society.

[98]  Martin Grell,et al.  Time-of-flight mobility measurements in organic field-effect transistors , 2008 .

[99]  G. Barra,et al.  Thermoplastic elastomer/polyaniline blends: Evaluation of mechanical and electromechanical properties , 2008 .

[100]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[101]  C. Brabec,et al.  Solution-Processed Organic Solar Cells , 2008 .

[102]  M. McGehee,et al.  Organic bulk heterojunction solar cells using poly(2,5-bis(3-tetradecyllthiophen-2-yl)thieno[3,2,-b]thiophene) , 2008 .

[103]  K. Matsumoto,et al.  Mechanically flexible and expandable display with conductive-polymer-coated nylon fabric , 2008, 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems.

[104]  C. Weder,et al.  Electrical conductivity and mechanical properties of polyaniline/natural rubber composite fibers , 2007 .

[105]  K. West,et al.  Highly Stretchable and Conductive Polymer Material Made from Poly(3,4‐ethylenedioxythiophene) and Polyurethane Elastomers , 2007 .

[106]  René A. J. Janssen,et al.  Tough, Semiconducting Polyethylene‐poly(3‐hexylthiophene) Diblock Copolymers , 2007 .

[107]  P. Avouris,et al.  Carbon-based electronics. , 2007, Nature nanotechnology.

[108]  J. Pinto,et al.  Preparation of a semi-conductive thermoplastic elastomer vulcanizate based on EVA and NBR blends with polyaniline , 2007 .

[109]  C. Brabec,et al.  Polyterthiophenes as Donors for Polymer Solar Cells , 2007 .

[110]  John A Rogers,et al.  Controlled buckling of semiconductor nanoribbons for stretchable electronics , 2006, Nature nanotechnology.

[111]  K. A. Padmanabhan,et al.  Structure−Property Correlations in Bending and Brittle Organic Crystals , 2006 .

[112]  M. C. Rezende,et al.  Reactive processing and evaluation of butadiene–styrene copolymer/polyaniline conductive blends , 2006 .

[113]  W. Eccleston.  Carbon as an electronics material , 2006 .

[114]  Donal D. C. Bradley,et al.  A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells , 2006 .

[115]  B. G. Soares,et al.  Conducting Elastomer Blends Based on Nitrile Rubber and Pani.DBSA , 2006 .

[116]  Chan Eon Park,et al.  The Effect of Gate‐Dielectric Surface Energy on Pentacene Morphology and Organic Field‐Effect Transistor Characteristics , 2005 .

[117]  S. Brady,et al.  The Development and Characterisation of Conducting Polymeric-based Sensing Devices , 2005 .

[118]  Elena E. Sheina,et al.  Regioregular poly(3-alkylthiophene) conducting block copolymers , 2005 .

[119]  C. P. Radano,et al.  Crystalline-crystalline block copolymers of regioregular poly(3-hexylthiophene) and polyethylene by ring-opening metathesis polymerization. , 2005, Journal of the American Chemical Society.

[120]  Seung-Ho Lee,et al.  Synthesis and properties of soluble polypyrrole doped with dodecylbenzenesulfonate and combined with polymeric additive poly(ethylene glycol) , 2005 .

[121]  Elizabeth von Hauff,et al.  Study of field effect mobility in PCBM films and P3HT : PCBM blends , 2005 .

[122]  V. Mihailetchi,et al.  Space-charge limited photocurrent. , 2005, Physical review letters.

[123]  Sam-Shajing Sun,et al.  Organic Photovoltaics : Mechanisms, Materials, and Devices , 2005 .

[124]  S. Jenekhe,et al.  Alkyl chain length dependence of the field-effect carrier mobility in regioregular poly(3-alkylthiophene)s , 2005 .

[125]  I. McCulloch,et al.  Microwave-assisted synthesis of polythiophenes via the Stille coupling , 2005 .

[126]  G. Barra,et al.  Processing, characterization and properties of conducting polyaniline-sulfonated SEBS block copolymers , 2004 .

[127]  Krzysztof Pielichowski,et al.  Recent developments in polyurethane-based conducting composites , 2004 .

[128]  V. Soldi,et al.  Characterization, morphology, thermal and mechanical properties of conductive polyaniline‐functionalized EPDM elastomers obtained by casting , 2004 .

[129]  Samson A Jenekhe,et al.  High electron mobility in ladder polymer field-effect transistors. , 2003, Journal of the American Chemical Society.

[130]  Siddaramaiah,et al.  Synthesis and characterization of polyaniline filled PU/PMMA interpenetrating polymer networks , 2003 .

[131]  Marco-A. De Paoli,et al.  Conductive polymer blends: Preparation, properties and applications , 2002 .

[132]  Y. Harima,et al.  Charge carriers in polyaniline film: a correlation between mobility and in-situ ESR measurements , 2002 .

[133]  D. Zou,et al.  Carrier Mobilities in Organic Electron Transport Materials Determined from Space Charge Limited Current , 2001 .

[134]  J. Hooker,et al.  Bulk and Interfacial Contributions to the Debonding Mechanisms of Soft Adhesives: Extension to Large Strains , 2001 .

[135]  Thomas Fromherz,et al.  The interplay of efficiency and morphology in photovoltaic devices based on interpenetrating networks of conjugated polymers with fullerenes , 2001 .

[136]  W. A. Gambling,et al.  Improved Time-of-Flight Technique for Measuring Carrier Mobility in Thin Films of Organic Electroluminescent Materials , 2000 .

[137]  M. Felisberti,et al.  Blends of polyaniline with nitrilic rubber , 2000 .

[138]  K. Ho,et al.  Polyurethane-based conducting polymer blends: I. Effect of chain extender , 1999 .

[139]  G. Whitesides,et al.  The controlled formation of ordered, sinusoidal structures by plasma oxidation of an elastomeric polymer , 1999 .

[140]  M. Paoli,et al.  An elastomeric conductor based on polyaniline prepared by mechanical mixing , 1999 .

[141]  M. Hara,et al.  Synergism in Mechanical Properties of Polymer/Polymer Blends , 1998 .

[142]  S. Palaniappan,et al.  Conducting polyaniline blends and composites , 1998 .

[143]  George M. Whitesides,et al.  Spontaneous formation of ordered structures in thin films of metals supported on an elastomeric polymer , 1998, Nature.

[144]  M. Stamm,et al.  Direct Correlation between Interfacial Width and Adhesion in Glassy Polymers , 1998 .

[145]  S. Gladkov,et al.  Multiple formation of microcracks during mechanical loading of polymers , 1997 .

[146]  M. Gallazzi,et al.  Search for conducting doped polymers with great chemical stability : regiospecific poly(3,3″-dihexyl-2,2':5',2″-terthiophene) , 1996 .

[147]  E. Ruckenstein,et al.  Synthesis of surface conductive polyurethane films , 1995 .

[148]  A. Heeger,et al.  Counter-ion induced processibility of conducting polyaniline and of conducting polyblends of polyaniline in bulk polymers , 1992 .

[149]  G. Gustafsson,et al.  Stretch-oriented poly(3-alkylthiophenes) , 1991 .

[150]  G. Gustafsson,et al.  Optical absorption of poly(3-alkylthiophenes) at low temperatures , 1989 .

[151]  Koji Tanaka,et al.  Morphology and mechanical properties of electrochemically prepared polythiophene films , 1988 .

[152]  D. Bradley.  Precursor-route poly(p-phenylenevinylene): polymer characterisation and control of electronic properties , 1987 .

[153]  Karl Hess,et al.  High field transport in GaAs, InP and InAs , 1984 .

[154]  G. Wnek,et al.  Study of polyacetylene and composites of polyacetylene/polyethylene by electron nuclear double resonance, electron nuclear nuclear triple resonance, and electron spin echo spectroscopies , 1983 .

[155]  G. Wnek,et al.  Electrically conductive polymer composites: polymerization of acetylene in polyethylene , 1982 .

[156]  JULIAN F. Johnson,et al.  Influence of molecular weight and molecular weight distribution on mechanical properties of polymers , 1982 .

[157]  F. Arnold,et al.  Preparation and Properties of High Molecular Weight, Soluble Oxobenz[de]imidazobenzimidazoisoquinoline Ladder Polymer , 1969 .

[158]  D. H. Kaelble,et al.  Peel Adhesion: Influence of Surface Energies and Adhesive Rheology , 1969 .

[159]  F. Smits.  Measurement of sheet resistivities with the four-point probe , 1958 .

[160]  P. Flory,et al.  Second‐Order Transition Temperatures and Related Properties of Polystyrene. I. Influence of Molecular Weight , 1950 .

[161]  W. Kupolati,et al.  NANOSTRUCTURED POLYMER BLENDS , 2016 .

[162]  Timothy O'Connor,et al.  Wearable organic solar cells with high cyclic bending stability: Materials selection criteria , 2016 .

[163]  Tomoya Higashihara,et al.  Synthesis and characterization of all-conjugated hard-soft-hard ABA triblock copolythiophenes , 2016 .

[164]  Eric J. Sawyer,et al.  Mechanical degradation and stability of organic solar cells: molecular and microstructural determinants , 2015 .

[165]  Timothy O'Connor,et al.  Stretching and conformal bonding of organic solar cells to hemispherical surfaces , 2014 .

[166]  Jin-Seo Noh,et al.  Highly conductive and stretchable poly(dimethylsiloxane):poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) blends for organic interconnects , 2014 .

[167]  T. Itoh,et al.  Photovoltaic Textiles Manufactured with Precision Die Coating , 2012 .

[168]  M. Paoli,et al.  Thermal and mechanical behaviour of a conductive elastomeric blend based on a soluble polyaniline derivative , 1999 .

[169]  Joel Fried,et al.  Polymer Science and Technology , 1995 .

[170]  Jeff Moulton,et al.  Electrical and mechanical properties of oriented poly(3-alkylthiophenes): 2. Effect of side-chain length , 1992 .

[171]  Nicholas P. Cheremisinoff,et al.  Handbook of polymer science and technology , 1989 .

[172]  A. Heeger,et al.  Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x , 1977 .