Flexural-torsional buckling of shallow arches with open thin-walled section under uniform radial loads

An arch with an open thin-walled section that is subjected to a radial load uniformly distributed around the arch axis may suddenly buckle out of its plane of loading and fail in a flexural-torsional buckling mode. The classical flexural-torsional buckling load for an arch with an open thin-walled section under a uniform radial load has been obtained by a number of researchers, based on the consideration that the uniform radial load produces a uniform axial compressive force without in-plane bending prior to the occurrence of flexural-torsional buckling. This assumption is correct for deep arches. However, the uniform radial load may produce substantial bending actions in shallow arches prior to flexural-torsional buckling, and so the classical buckling analysis based on the assumption of uniform axial compression may produce incorrect flexural-torsional buckling loads for shallow arches. This paper investigates the flexural-torsional buckling of shallow arches with an open thin-walled section that are subjected to a radial load uniformly distributed around the arch axis. It is found that shallow arches under a uniform radial load are subjected to combined in-plane compressive and bending actions prior to flexural-torsional buckling, and that using the classical buckling solution for circular arches under uniform compression produces incorrect buckling loads for shallow arches. A rational finite element model is developed for the flexural-torsional buckling and postbuckling analysis of shallow arches with an open thin-walled section, which allows the buckling loads to be obtained correctly.