Design equations for binary shape memory actuators under arbitrary external forces

This article presents the design equations for an on–off shape memory alloy actuator working against an external system of arbitrary constant forces. A binary shape memory alloy actuator is considered where a cursor is moved against both conservative and dissipative forces, which may be different during the push or pull phase. Three cases are analysed and differentiated in the way the bias force is applied to the primary shape memory alloy spring: using a constant force, a conventional spring or a second shape memory alloy spring. Closed-form dimensionless design equations are developed, which form the basis of a step-by-step procedure for an optimal design of the whole actuator.

[1]  T. Stolarski.  Tribology in Machine Design , 1990 .

[2]  Vincent Hayward,et al.  Design and comparison of high strain shape memory alloy actuators , 1997, Proceedings of International Conference on Robotics and Automation.

[3]  Paolo Dario,et al.  Shape memory alloy microactuators , 1990 .

[4]  Gustav Niemann.  Machine elements; design and calculation in mechanical engineering. Vol. II: Gears / Gustav Niemann, translated by K. Lakshminarayana , 1978 .

[5]  C. A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1997 .

[6]  Mohd Jailani Mohd Nor,et al.  A new concept of a linear smart actuator , 2007 .

[7]  K. Kuribayashi.  Millimeter-sized joint actuator using a shape memory alloy , 1989 .

[8]  Horst Meier,et al.  Computer-Aided Development and Simulation Tools for Shape-Memory Actuators , 2012, Metallurgical and Materials Transactions A.

[9]  Hisaaki Tobushi,et al.  Deformation of a Shape Memory Alloy Helical Spring : Analysis Based on Stress-Strain-Temperature Relation , 1991 .

[10]  Byungkyu Kim,et al.  An earthworm-like micro robot using shape memory alloy actuator , 2006 .

[11]  Craig A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1990 .

[12]  Dominiek Reynaerts,et al.  Design aspects of shape memory actuators , 1998 .

[13]  Alexander Czechowicz,et al.  Adaptive resetting of SMA actuators , 2012 .

[14]  Constantinos Mavroidis,et al.  5.1 CONVENTIONAL ACTUATORS, SHAPE MEMORY ALLOYS, AND ELECTRORHEOLOGICAL FLUIDS , 1999 .

[15]  W. Huang.  On the selection of shape memory alloys for actuators , 2002 .

[16]  Eugenio Dragoni,et al.  Design equations for binary shape memory actuators under dissipative forces , 2009 .