Post-fire mechanical response of ultra-high strength (Grade 1200) steel under high temperatures: Linking thermal stability and microstructure

[1]  P. Beardmore.  The potential for high strength steels in the U.S. automotive industry , 1981 .

[2]  Y. Yabuki,et al.  A Theoretical Consideration On Heat Transfer In Fire Resistance Furnaces For Furnace Harmonization , 1997 .

[3]  E. Mirambell,et al.  On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation , 2000 .

[4]  Kim Rasmussen,et al.  Full-range stress–strain curves for stainless steelalloys , 2003 .

[5]  Y. Ling,et al.  Uniaxial True Stress-Strain after Necking , 2004 .

[6]  Pentti Mäkeläinen,et al.  Mechanical properties of structural steel at elevated temperatures and after cooling down , 2004 .

[7]  G. Marlair,et al.  A two-thermocouples probe for radiation corrections of measured temperatures in compartment fires , 2004 .

[8]  V. Narang.  Heat Transfer Analysis In Steel Structures , 2005 .

[9]  Gregory J. Hancock,et al.  Development of the 2005 Edition of the Australian/New Zealand Standard for Cold-Formed Steel Structures AS/NZS 4600 , 2008 .

[10]  Y. Bréchet,et al.  Quantifying the Solute Drag Effect on Ferrite Growth in Fe-C-X Alloys Using Controlled Decarburization Experiments , 2013, Metallurgical and Materials Transactions A.

[11]  H. Kolstein,et al.  Post-fire mechanical properties of high strength structural steels S460 and S690 , 2012 .

[12]  Y. Bréchet,et al.  Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys , 2013, Metallurgical and Materials Transactions A.

[13]  H. Kolstein,et al.  Post-fire performance of very high strength steel S960 , 2013 .

[14]  Amin Heidarpour,et al.  A multi-objective optimization approach to the parameter determination of constitutive plasticity models for the simulation of multi-phase load histories , 2014 .

[15]  Amin Heidarpour,et al.  Stress–strain–temperature relation for cyclically-damaged structural mild steel , 2014 .

[16]  X. Zhao,et al.  Behaviour of stub columns utilising mild-steel plates and VHS tubes under fire , 2014 .

[17]  A. H. Korayem,et al.  Mechanical properties of very high strength steel at elevated temperatures , 2014 .

[18]  C. Lee,et al.  Mechanical properties of heat-treated high strength steel under fire/post-fire conditions , 2014 .

[19]  M. Mahendran,et al.  Experimental investigation of post-fire mechanical properties of cold-formed steels , 2014 .

[20]  I. Darío,et al.  Correction of the post -- necking true stress -- strain data using instrumented nanoindentation , 2014 .

[21]  C. Hutchinson,et al.  New insights into the limit for non-partitioning ferrite growth , 2015 .

[22]  L. Gardner,et al.  Description of stress-strain curves for stainless steel alloys , 2015 .

[23]  Jiepeng Liu,et al.  Experimental study on post-fire mechanical properties of high strength Q460 steel , 2015 .

[24]  X. Zhao,et al.  Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: An experimental investigation , 2015 .

[25]  W. Tong,et al.  Identification of post-necking strain hardening behavior of thin sheet metals from image-based surface strain data in uniaxial tension tests , 2015 .

[26]  S. Zwaag,et al.  Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels , 2015 .

[27]  C. Hutchinson,et al.  The coupled solute drag effect during ferrite growth in Fe-C-Mn-Si alloys using controlled decarburization , 2015 .

[28]  X. Zhao,et al.  Innovative hollow columns comprising corrugated plates and ultra high-strength steel tubes , 2016 .

[29]  Amin Heidarpour,et al.  Post-earthquake fire behavior of welded steel I-beam to hollow column connections: An experimental investigation , 2016 .

[30]  R. Al-Mahaidi,et al.  Parametric study on the static compressive behaviour of concrete-filled double-skin sections consisting of corrugated plates , 2016 .

[31]  Amin Heidarpour,et al.  Numerical investigation of innovative modular beam-to-fabricated column connections under monotonic loading , 2016 .

[32]  Kunmin Zhao,et al.  Identification of post-necking stress–strain curve for sheet metals by inverse method , 2016 .

[33]  X. Zhao,et al.  Plastic strain characteristics of butt-welded ultra-high strength steel (UHSS) , 2016 .

[34]  X. Zhao,et al.  Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature , 2016 .

[35]  X. Zhao,et al.  Application of high strength and ultra-high strength steel tubes in long hybrid compressive members: Experimental and numerical investigation , 2016 .

[36]  C. Hutchinson,et al.  Strain ageing effect on the temperature dependent mechanical properties of partially damaged structural mild-steel induced by high strain rate loading , 2016 .