A field-consistent and variationally correct representation of transverse shear strains in the nine-noded plate element

We present a biquadratic Lagrangian plate bending element with consistent fields for the constrained transverse shear strain functions. A technique involving expansion of the strain interpolations in terms of Legendre polynomials is used to redistribute the kinematically derived shear strain fields so that the field-consistent forms (i.e. avoiding locking) are also variationally correct (i.e. do not violate the variational norms). Also, a rational method of isoparametric Jacobian transformation is incorporated so that the constrained covariant shear strain fields are always consistent in whatever general quadrilateral form the element may take. Finally the element is compared with another formulation which was recently published. The element is subjected to several robust bench mark tests and is found to pass all the tests efficiently.

[1]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[2]  Gangan Prathap,et al.  Field-consistent strain interpolations for the quadratic shear flexible beam element , 1986 .

[3]  Atef F. Saleeb,et al.  On the mixed formulation of a 9-node Lagrange shell element , 1989 .

[4]  Field‐consistency rules for a three‐noded shear flexible beam element under non‐uniform isoparametric mapping , 1992 .

[5]  J. C. Simo,et al.  On the Variational Foundations of Assumed Strain Methods , 1986 .

[6]  Gangan Prathap,et al.  Reduced integration and the shear-flexible beam element , 1982 .

[7]  G. Prathap,et al.  Displacement and stress predictions from field- and line-consistent versions of the eight-node mindlin plate element , 1989 .

[8]  Ted Belytschko,et al.  Implementation and application of a 9-node Lagrange shell element with spurious mode control , 1985 .

[9]  Ray W. Clough,et al.  Improved numerical integration of thick shell finite elements , 1971 .

[10]  S. W. Lee,et al.  Study of a nine-node mixed formulation finite element for thin plates and shells , 1985 .

[11]  L. Morley.  Skew plates and structures , 1963 .

[12]  G. Prathap,et al.  Consistency aspects of out‐of‐plane bending, torsion and shear in a quadratic curved beam element , 1990 .

[13]  E. Hinton,et al.  A nine node Lagrangian Mindlin plate element with enhanced shear interpolation , 1984 .

[14]  Gangan Prathap,et al.  Analysis of locking and stress oscillations in a general curved beam element , 1990 .

[15]  J. Donea,et al.  A modified representation of transverse shear in C 0 quadrilateral plate elements , 1987 .

[16]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[17]  Ted Belytschko,et al.  A consistent control of spurious singular modes in the 9-node Lagrange element for the laplace and mindlin plate equations , 1984 .

[18]  Gangan Prathap,et al.  Stress oscillations and spurious load mechanisms in variationally inconsistent assumed strain formulations , 1992 .

[19]  Gangan Prathap,et al.  Field‐ and edge‐consistency synthesis of A 4‐noded quadrilateral plate bending element , 1988 .

[20]  O. C. Zienkiewicz,et al.  Analysis of thick and thin shell structures by curved finite elements , 1970 .