Effects of aging on the vibrational properties of wood

Abstract Vibrational properties of aged wood (121∼296 years old) were compared with those of recently cut “new” wood (8 years old). The aged wood showed higher sound velocity ( V L ) and lower mechanical loss tangent (tan δ L ) than the new wood. The ratio of Young's modulus and shear modulus ( E L / G L ) remained unchanged or increased slightly during the aging period. These results coincide with musicians’ empirical observations that the acoustic quality of wooden soundboards is improved by aging. In addition, the reduced tan δ L of the aged wood indicates the qualitative difference between the naturally aged and heat-treated wood. The experimental results were explained by using a cell wall model when we assumed the following: increase in the volume fraction of cellulosic microfibrils; reduction in the shear modulus of amorphous matrix substances, and; reduction in the loss tangent of the matrix. These assumptions appear reasonable when we consider the crystallization of cellulose, depolymerization of hemicelluloses, and cross-linking in the lignin complex during aging.

[1]  R. Hearmon,et al.  The influence of shear and rotatory inertia on the free flexural vibration of wooden beams , 1958 .

[2]  L. Salmén,et al.  Interactions between wood polymers studied by dynamic FT-IR spectroscopy , 2001 .

[3]  Masamitsu Ohta,et al.  Vibrational properties of Sitka spruce heat-treated in nitrogen gas , 1998, Journal of Wood Science.

[4]  Mariko Yamasaki,et al.  Strength properties of aged wood, 2: Compressive strength properties, shearing strength and hardness of aged keyaki [Zelkova serrata] and akamatsu [Pinus denshiflora] woods , 2004 .

[5]  Mariko Yamasaki,et al.  Strength Properties of Aged Wood III : Static and impact bending strength properties of aged keyaki and akamatsu woods , 2005 .

[6]  Nobuyuki Hirai,et al.  Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions , 2000, Journal of Wood Science.

[7]  Junji Sugiyama,et al.  Mechanical characteristics of aged Hinoki wood from Japanese historical buildings , 2009 .

[8]  Kenji Umemura,et al.  Color changes in wood during heating: kinetic analysis by applying a time-temperature superposition method , 2010 .

[9]  Ruth E. Cameron,et al.  A Review of the Relationship Between Thermally-Accelerated Ageing of Paper and Hornification , 1999 .

[10]  T. Ono.  Transient response of wood for musical instruments and its mechanism in vibrational property , 1999 .

[11]  J. Sugiyama,et al.  Aging of wood: Analysis of color changes during natural aging and heat treatment , 2011 .

[12]  H. Militz,et al.  Characterisation of thermally modified wood: molecular reasons for wood performance improvement , 1998, Holz als Roh- und Werkstoff.

[13]  Kazuya Minato,et al.  Chemical treatment of wood for musical instruments , 1994 .

[14]  Mariko Yamasaki,et al.  Strengh properties of aged wood, 1: Tensile strengh properties of aged keyaki [Zelkova serrata] and akamatsu [Pinus densiflora] woods , 2004 .

[15]  E. Obataya,et al.  Hygroscopicity of Heattreated Wood III. Effect of steaming on the hygroscopicity of wood , 2002 .

[16]  M. Norimoto,et al.  On physical criteria for the selection of wood for soundboards of musical instruments , 1984 .

[17]  Yasutoshi Sasaki,et al.  Microscopic processes of shearing fracture of old wood, examined using the acoustic emission technique , 2006, Journal of Wood Science.

[18]  Hanne Wikberg,et al.  Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR , 2004 .

[19]  Teruaki Ono,et al.  Vibrational properties of wood along the grain , 2000 .

[20]  T. Ono.  Frequency responses of wood for musical instruments in relation to the vibrational properties , 1996 .