Modeling of high-density compaction of granular materials by the Discrete Element Method

Cold compaction of metal powders is now commonly studied at a microscopic scale, to further our understanding of contact mechanics between grains. The Discrete Element Method (DEM) is therefore, a good compromise between calculation time and precision. DEM simulations are in general limited to a relative density of about 0.8, because the existing contact laws do not reproduce all the physical phenomena involved in the densification of granular media. Local contact mechanics can be studied by finite element analyses on meshed distinct elements (MDEM, Meshed Distinct Element Method). However, this method is too time-consuming when in the presence of a large number of grains. In the following work, a new analytical contact law will be formulated with MDEM which will subsequently be used to validate the DEM model. Thus, it will be possible with DEM modeling to reproduce high-density compaction of random packings up to a relative density of about 0.95. By introducing a local relative density parameter in the force–displacement relationship, the incompressibility effects which rule high-density behaviors can be introduced in the modeling of powder compaction.

[1]  Chuan-Yu Wu,et al.  Die Filling and Powder Transfer , 2003 .

[2]  Paul R. Heyliger,et al.  Cold plastic compaction of powders by a network model , 2001 .

[3]  Rajesh Ransing,et al.  A discrete deformable element approach for the compaction of powder systems , 2003 .

[4]  C. L. Martin.  Elasticity, fracture and yielding of cold compacted metal powders , 2004 .

[5]  Per-Lennart Larsson,et al.  On discrete element modelling of compaction of powders with size ratio , 2004 .

[6]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[7]  Norman A. Fleck,et al.  Frictionless indentation of dissimilar elastic-plastic spheres , 2000 .

[8]  L. Vu-Quoc,et al.  Normal and tangential force-displacement relations for frictional elasto-plastic contact of spheres , 2001 .

[9]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[10]  Norman A. Fleck,et al.  Spherical indentation of elastic–plastic solids , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[11]  Göran Frenning,et al.  An efficient finite/discrete element procedure for simulating compression of 3D particle assemblies , 2008 .

[12]  Christophe L. Martin,et al.  Study of the cold compaction of composite powders by the discrete element method , 2003 .

[13]  Norman A. Fleck,et al.  The viscoplastic compaction of composite powders , 1999 .

[14]  J. Kozicki,et al.  A new open-source software developed for numerical simulations using discrete modeling methods , 2008 .

[15]  Per-Lennart Larsson,et al.  Similarity analysis of inelastic contact , 1997 .

[16]  J. L. Finney,et al.  Characterisation of models of multicomponent amorphous metals: The radical alternative to the Voronoi polyhedron , 1982 .

[17]  Félix Darve,et al.  Numerical simulation of drained triaxial test using 3D discrete element modeling , 2009 .

[18]  Christophe L. Martin,et al.  Study of particle rearrangement during powder compaction by the Discrete Element Method , 2003 .

[19]  D. Imbault,et al.  Numerical Simulation of Cold Compaction of 3D Granular Packings , 2007 .

[20]  Antonios Zavaliangos,et al.  Simulation of multi-axial compaction of granular media from loose to high relative densities , 2005 .

[21]  J L Finney,et al.  Calculation of protein volumes: an alternative to the Voronoi procedure. , 1982, Journal of molecular biology.