Predictive method for the macroscopic mechanical properties of concrete at ultra-low temperatures

[1]  Z. Zheng,et al.  Mesoscale models and uniaxial tensile numerical simulations of concrete considering material heterogeneity and spatial correlation , 2021, Construction and Building Materials.

[2]  Shiyun Xiao,et al.  Three-dimensional mesoscale modeling of concrete with convex aggregate based on motion simulation , 2021 .

[3]  Xiu-li Du,et al.  Size effect in shear failure of lightweight concrete beams wrapped with CFRP without stirrups: Influence of fiber ratio , 2020 .

[4]  Zheng-wu Jiang,et al.  State-of-the-art review on properties evolution and deterioration mechanism of concrete at cryogenic temperature , 2020 .

[5]  Vanissorn Vimonsatit,et al.  Mesoscale modelling of concrete – A review of geometry generation, placing algorithms, constitutive relations and applications , 2020 .

[6]  Xiu-li Du,et al.  Size effect of axial-loaded concrete-filled steel tubular columns with different confinement coefficients , 2019, Engineering Structures.

[7]  B. Klusemann,et al.  Generation of 3D representative volume elements for heterogeneous materials: A review , 2018, Progress in Materials Science.

[8]  Jie Zhang,et al.  3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates , 2018 .

[9]  Yong Lu,et al.  A mesoscale interface approach to modelling fractures in concrete for material investigation , 2018 .

[10]  Jian Xie,et al.  Behaviours of reinforced concrete beams under low temperatures , 2017 .

[11]  Luís A.G. Bitencourt,et al.  2D mesoscale model for concrete based on the use of interface element with a high aspect ratio , 2016 .

[12]  J. Xie,et al.  Experimental study on bonding properties between steel strand and concrete at cryogenic temperatures , 2016 .

[13]  Yi Xu,et al.  A method for modeling the damage behavior of concrete with a three-phase mesostructure , 2016 .

[14]  Andrey P. Jivkov,et al.  Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores , 2015 .

[15]  Eyad Masad,et al.  A review of concrete properties at cryogenic temperatures: Towards direct LNG containment , 2013 .

[16]  X. Gu,et al.  Experimental study and application of mechanical properties for the interface between cobblestone aggregate and mortar in concrete , 2013 .

[17]  Mohammadreza Yaghoobi,et al.  Mesoscale finite element prediction of concrete failure , 2011 .

[18]  A. Amirjanov,et al.  Application of genetic algorithm for modeling of dense packing of concrete aggregates , 2010 .

[19]  Salah Kaci,et al.  Behavior of the reinforced concrete at cryogenic temperatures , 2007 .

[20]  Neven Krstulovic-Opara,et al.  Liquefied Natural Gas Storage: Material Behavior of Concrete at Cryogenic Temperatures , 2007 .

[21]  E. Hinton,et al.  A review of homogenization and topology optimization I- homogenization theory for media with periodic structure , 1998 .

[22]  E. Hinton,et al.  A review of homogenization and topology opimization II—analytical and numerical solution of homogenization equations , 1998 .

[23]  N. Kikuchi,et al.  Preprocessing and postprocessing for materials based on the homogenization method with adaptive fini , 1990 .

[24]  George C. Lee,et al.  MECHANICAL PROPERTIES OF CONCRETE AT LOW TEMPERATURE , 1988 .

[25]  H. Murakami,et al.  A high-order mixture model for periodic particulate composites , 1987 .