Two-dimensional (2-D) and three-dimensional (3-D) diamond-like carbon (DLC) stamps for ultraviolet nanoimprint lithography were fabricated with two methods: namely, a DLC coating process, followed by focused ion beam lithography; and two-photon polymerization patterning, followed by nanoscale-thick DLC coating. We used focused ion beam lithography to fabricate 70 nm deep lines with a width of 100 nm, as well as 70 nm deep lines with a width of 150 nm, on 100 nm thick DLC layers coated on quartz substrates. We also used two-photon polymerization patterning and a DLC coating process to successfully fabricate 200 nm wide lines, as well as 3-D rings with a diameter of 1.35 microm and a height of 1.97 microm, and a 3-D cone with a bottom diameter of 2.88 microm and a height of 1.97 microm. The wafers were successfully printed on an UV-NIL using the DLC stamps without an anti-adhesive layer. The correlation between the dimensions of the stamp's features and the corresponding imprinted features was excellent.