In-cylinder flows of a motored four-stroke engine with flat-crown and slightly concave-crown pistons

The temporal and spatial evolution processes of the in-cylinder flow structures and turbulence intensities in the symmetry and offset planes of a motored four-valve, four-stroke engine during the intake and compression strokes are diagnosed by using a particle image velocimeter. Two pistons of different crown shapes (flat-crown and slightly concave-crown pistons) are studied. The inception, establishment, and evolution of the tumbling vortical flow structures during the intake and compression strokes are clearly depicted. Quantitative strengths of the rotating vortical flow motions are presented by a dimensionless parameter, the tumble ratio, which can represent the mean angular velocity of the vortices in the target plane. The turbulence intensity of the in-cylinder flow is also calculated by using the measured time-varying velocity data. The results show that the flat-crown piston induces higher bulk-averaged tumble ratio and turbulence intensity than the slightly concave-crown piston does because the tumble ratio and turbulence generated by the flat-crown piston in the offset planes during the compression stroke are particularly large. The engine with the flat-crown piston also presents larger torque and power outputs and lower hydrocarbon emission than that with the slightly concave-crown piston. This might be caused by the enhanced combustion in the engine cylinder due to the stronger tumble ratio and turbulence intensity.

[1]  Richard D. Keane,et al.  Optimization of particle image velocimeters. I, Double pulsed systems , 1990 .

[2]  R. Mei,et al.  Velocity fidelity of flow tracer particles , 1996 .

[3]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[4]  J. W. Kim,et al.  Effect of Tumble Strength on Combustion and Exhaust Emissions in a Single-Cylinder, Four-Valve, Spark-Ignition Engine , 1998 .

[5]  J. Hunt,et al.  Kinematical studies of the flows around free or surface-mounted obstacles; applying topology to flow visualization , 1978, Journal of Fluid Mechanics.

[6]  John H. Seinfeld,et al.  Fundamentals of Air Pollution Engineering , 1988 .

[7]  A. Lecerf,et al.  In-Cylinder Velocity Measurements with Stereoscopic Particle Image Velocimetry in a SI engine , 2000 .

[8]  A. Ekchian,et al.  Flow visualization study of the intake process of an internal combustion engine. , 1979 .

[9]  D. A. Santavicca,et al.  Cycle Resolved LDV Measurements in a Motored IC Engine , 1985 .

[10]  David P. Towers,et al.  A high-speed all-digital technique for cycle-resolved 2-D flow measurement and flow visualisation within SI engine cylinders , 1999 .

[11]  R. Huang,et al.  Observations of Swirling Flows Behind Circular Disks , 2001 .

[12]  John B. Heywood,et al.  Fluid Motion Within the Cylinder of Internal Combustion Engines—The 1986 Freeman Scholar Lecture , 1987 .

[13]  H. S. Yang,et al.  Topological flow evolutions in cylinder of a motored engine during intake and compression strokes , 2005 .

[14]  J. Lumley,et al.  A First Course in Turbulence , 1972 .

[15]  D. Tritton,et al.  Physical Fluid Dynamics , 1977 .

[16]  R. Rask,et al.  Laser Doppler Anemometer Measurements in an Internal Combustion Engine , 1979 .

[17]  Richard D. Keane,et al.  Theory of cross-correlation analysis of PIV images , 1992 .

[18]  B. Khalighi.  Study of the intake tumble motion by flow visualization and particle tracking velocimetry , 1991 .

[19]  Daniel C. Haworth,et al.  Multidimensional Port-and-Cylinder Flow Calculations for Two- and Four-Valve-Per-Cylinder Engines: Influence of Intake Configuration on Flow Structure , 1990 .

[20]  R. P. Benedict,et al.  ASME Measurement Uncertainty , 1985 .

[21]  C. Arcoumanis,et al.  Effects of Flow and Geometry Boundary Conditions on Fluid Motion in a Motored IC Model Engine , 1982 .