Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells

Abstract A quasi-static mechanical abuse test program on cylindrical Lithium ion battery cells has been performed at a state of charge (SoC) of 0%. The investigated load cases involved radial crushing, local lateral indentation and global three-point bending of the cell. During the tests, the punch load, the punch displacement, the cell voltage and the temperature development of the cell have been monitored using an infrared camera and temperature sensors. After the test, the cells have been analysed using computer tomography. It is indicated that macroscopic jelly roll fracture on a global scale initiates the internal short circuits, revealed by a sudden decrease of the global mechanical load due to the rupture, followed by a drop of the measured voltage and immediate increase in cell temperature. A macro-mechanical finite element crash simulation model has been established for the cell housing and the jelly roll. The classical stress-based criterion after Mohr and Coulomb (MC) has been applied to predict fracture and the initiation of an internal short circuit of the jelly roll. The MC criterion correctly represents the punch displacement to fracture, where the predicted fracture locations correspond to the observed locations of the internal short circuits of the cells.

[1]  Yuanli Bai,et al.  Application of extended Mohr–Coulomb criterion to ductile fracture , 2009 .

[2]  Otto Mohr,et al.  Abhandlungen aus dem Gebiete der technischen Mechanik , 1906 .

[3]  Michael D. Farrington,et al.  Safety of lithium batteries in transportation , 2001 .

[4]  T. Wierzbicki,et al.  Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity , 2012 .

[5]  R. S. Raghava,et al.  The macroscopic yield behaviour of polymers , 1973 .

[6]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[7]  C. Lexcellent,et al.  Analytical prediction of the phase transformation onset zone at a crack tip of a shape memory alloy exhibiting asymmetry between tension and compression , 2011 .

[8]  R. J. Brodd,et al.  Lithium-ion batteries : science and technologies , 2009 .

[9]  H. Maleki,et al.  Internal short circuit in Li-ion cells , 2009 .

[10]  Stephen A. Hackney,et al.  High Energy Density Lithium Batteries: Materials, Engineering, Applications , 2010 .

[11]  R. Spotnitz,et al.  Abuse behavior of high-power, lithium-ion cells , 2003 .

[12]  Tatsuo Nakamura,et al.  Composite nonwoven separator for lithium-ion battery: Development and characterization , 2010 .

[13]  E. Roth,et al.  Simulation of abuse tolerance of lithium-ion battery packs , 2007 .

[14]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[15]  W. Shyy,et al.  Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles , 2007 .

[16]  H. W. Swift.  Plastic instability under plane stress , 1952 .

[17]  Xiaosong Huang,et al.  A multi-scale approach for the stress analysis of polymeric separators in a lithium-ion battery , 2010 .

[18]  J. Howard,et al.  Characterization of microporous separators for lithium-ion batteries , 1999 .