Fatigue performance investigation for hangers of suspension bridges based on site-specific vehicle loads

Hangers or suspenders of a suspension bridge are the primary load-carrying members and are vital to the structural integrity and service life of the bridge. Site-specific vehicle loads monitored by the weigh-in-motion system can assist to obtain the operational cyclic stresses of hangers. Differing from most existing studies, herein, a framework for fatigue performance investigation for hangers of suspension bridges is proposed utilizing the full information of the weigh-in-motion data. This framework includes four steps: (1) generate influence surfaces for hangers, (2) reconstruct vehicular loading flows based on the weigh-in-motion data, (3) calculate time histories of hanger tension forces, and (4) evaluate fatigue damages and predict fatigue lives. Critical issues, such as the loading configuration of trucks, the threshold of the gross vehicle weight, and the time step for stress calculation, have been studied and discussed in detail. Based on 8-month weigh-in-motion data of a prototype suspension bridge, it is shown that the fatigue damage of hangers can be evaluated day by day, and subsequently the fatigue lives can be predicted. The correlation between the fatigue damages and vehicular loads is also investigated in this study.

[1]  Pengzhen Lu,et al.  Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads , 2015 .

[2]  K. Bowman.  Mechanical Behavior of Materials , 2003 .

[3]  Maria Q. Feng,et al.  Cable tension force estimate using novel noncontact vision-based sensor , 2017 .

[4]  Franco Bontempi,et al.  Estimation of fatigue life for long span suspension bridge hangers under wind action and train transit , 2011 .

[5]  Songye Zhu,et al.  Long‐term condition assessment of suspenders under traffic loads based on structural monitoring system: Application to the Tsing Ma Bridge , 2012 .

[6]  Jeong-In Suh,et al.  Experimental study on fatigue behaviour of wire ropes , 2000 .

[7]  Koei Takena,et al.  FATIGUE RESISTANCE OF LARGE-DIAMETER CABLE FOR CABLE-STAYED BRIDGES , 1992 .

[8]  Yang Liu,et al.  Fatigue reliability assessment for orthotropic steel deck details under traffic flow and temperature loading , 2017 .

[9]  Ou Jinping,et al.  Optic fiber sensor-based smart bridge cable with functionality of self-sensing , 2013 .

[10]  Tong Guo,et al.  Fatigue Life Evaluation on Short Suspenders of Long-Span Suspension Bridge with Central Clamps , 2017 .

[11]  Tong Guo,et al.  Probabilistic Fatigue Life Prediction of Bridge Cables Based on Multiscaling and Mesoscopic Fracture Mechanics , 2016 .

[12]  Darrell F. Socie,et al.  Simple rainflow counting algorithms , 1982 .

[13]  R. Brook,et al.  Cumulative Damage in Fatigue: A Step towards Its Understanding , 1969 .

[14]  I M Friedland.  BRIDGE DESIGN SPECIFICATIONS FOR THE FUTURE , 1992 .

[15]  Yuequan Bao,et al.  Identification of time‐varying cable tension forces based on adaptive sparse time‐frequency analysis of cable vibrations , 2017 .

[16]  Yang Liu,et al.  Long-Term In-Service Monitoring and Performance Assessment of the Main Cables of Long-Span Suspension Bridges , 2017, Sensors.

[17]  Zeng Yon.  Fatigue Assessment of Hanger Wires of Suspension Bridges in Its Operation Life Based on In-situ Traffic Flow , 2014 .

[18]  Tong Guo,et al.  Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis , 2012 .

[19]  Songye Zhu,et al.  Probabilistic deterioration model of high-strength steel wires and its application to bridge cables , 2015 .

[20]  C. S. Cai,et al.  Deflection monitoring and assessment for a suspension bridge using a connected pipe system: a case study in China , 2015 .

[21]  Liu Jian-xin.  Study of Vehicle-bridge Coupling Vibration Under Actual Traffic Flow , 2012 .

[22]  R. Rackwitz,et al.  Aspects of parallel wire cable reliability , 2003 .