Analysis of DFIG machine with rotor-wound faults

The round rotor induction machine (WRIM) can be described as a doubly fed induction generator (DFIG) when driven above the synchronous speed, and the stator and rotor windings are connected to the whole system. The work in this paper develops a relatively simple powerful model that can accurately analysis the behavior of DFIG with rotor-wound faults. The model is based upon the calculation of the stator current components, which are needed to the build impedance matrix. This method is used here to detect the rotor asymmetry fault on a four-pole wound rotor. Measured torque, current, and power loss results are compared with computer predictions for the machine with a rotor connected to symmetrical or asymmetrical external resistance. An equivalent circuit for a wound rotor induction machine, which includes external resistances, is derived. This is essential for building a better understanding of the fault components computed from the matrix. Simulation and experimental results evidence the validity of the suggested method, leading to an improved condition monitoring system for diagnosing faults in WRIMs.

[1]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[2]  Remus Pusca,et al.  Study of Rotor Faults in Induction Motors Using External Magnetic Field Analysis , 2012, IEEE Transactions on Industrial Electronics.

[3]  A.C. Smith,et al.  Harmonic field analysis for slip-ring motors including general rotor asymmetry , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[4]  D.G. Dorrell.  Design Requirements for Doubly-Fed Reluctance Generators , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[5]  Peter Tavner,et al.  Condition monitoring of wind turbine induction generators with rotor electrical asymmetry , 2012 .

[6]  T. H. Barton,et al.  The operation of three-phase induction motors with unsymmetrical impedance in the secondary circuit , 1955 .

[7]  Richard J. Povinelli,et al.  Induction Machine Broken Bar and Stator Short-Circuit Fault Diagnostics Based on Three-Phase Stator Current Envelopes , 2008, IEEE Transactions on Industrial Electronics.

[8]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[9]  D. Dorrell.  Calculation of Unbalanced Magnetic Pull in Cage Induction Machines , 1993 .

[10]  David G. Dorrell,et al.  Detection of Rotor Eccentricity in Wound Rotor Induction Machines Using Pole-Specific Search Coils , 2015, IEEE Transactions on Magnetics.

[11]  David G. Dorrell,et al.  Impedance matrix analysis technique in wound rotor induction machines including general rotor asymmetry , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[12]  Min-Fu Hsieh,et al.  Damper windings in induction machines for reduction of unbalanced magnetic pull and bearing wear , 2011 .

[13]  Yaoyu Li,et al.  A review of recent advances in wind turbine condition monitoring and fault diagnosis , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[14]  David G. Dorrell,et al.  Analysis of airgap flux, current and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.