Fabrication and Characterization of Aligned Flexible Lead-Free Piezoelectric Nanofibers for Wearable Device Applications

Flexible lead-free piezoelectric nanofibers, based on BNT-ST (0.78Bi0.5Na0.5TiO3-0.22SrTiO3) ceramic and poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) copolymers, were fabricated by an electrospinning method and the effects of the degree of alignment in the nanofibers on the piezoelectric characteristics were investigated. The microstructure of the lead-free piezoelectric nanofibers was observed by field emission scanning electron microscope (FE-SEM) and the orientation was analyzed by fast Fourier transform (FFT) images. X-ray diffraction (XRD) analysis confirmed that the phase was not changed by the electrospinning process and maintained a perovskite phase. Polarization-electric field (P-E) loops and piezoresponse force microscopy (PFM) were used to investigate the piezoelectric properties of the piezoelectric nanofibers, according to the degree of alignment—the well aligned piezoelectric nanofibers had higher piezoelectric properties. Furthermore, the output voltage of the aligned lead-free piezoelectric nanofibers was measured according to the vibration frequency and the bending motion and the aligned piezoelectric nanofibers with a collector rotation speed of 1500 rpm performed the best.

[1]  George G. Chase,et al.  Continuous Electrospinning of Aligned Polymer Nanofibers onto a Wire Drum Collector , 2004 .

[2]  Ray H. Baughman,et al.  Flexible, stretchable and weavable piezoelectric fiber , 2015 .

[3]  J. Zhai,et al.  The effect of stress on the piezoelectric properties of BNT–BT–ST thin films , 2016 .

[4]  Han Byul Kang,et al.  (Na,K)NbO3 nanoparticle-embedded piezoelectric nanofiber composites for flexible nanogenerators , 2015 .

[5]  Xi Chen,et al.  Flexible piezoelectric nanofiber composite membranes as high performance acoustic emission sensors , 2013 .

[6]  Yonggang Huang,et al.  High performance piezoelectric devices based on aligned arrays of nanofibers of poly(vinylidenefluoride-co-trifluoroethylene) , 2013, Nature Communications.

[7]  Sihong Wang,et al.  A Hybrid Piezoelectric Structure for Wearable Nanogenerators , 2012, Advanced materials.

[8]  Pooi See Lee,et al.  Stress-induced structural changes in electrospun polyvinylidene difluoride nanofibers collected using a modified rotating disk , 2008 .

[9]  Yiu-Wing Mai,et al.  Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile properties , 2010 .

[10]  S. Ji,et al.  Flexible lead-free piezoelectric nanofiber composites based on BNT-ST and PVDF for frequency sensor applications , 2016 .

[11]  Hui Li,et al.  Fabrication and piezoresponse of electrospun ultra-fine Pb(Zr0.3, Ti0.7)O3 nanofibers , 2012 .

[12]  S. Ji,et al.  Poling effects on the performance of a lead-free piezoelectric nanofiber in a structural health monitoring sensor , 2017 .

[13]  Y. Xin,et al.  Full-fiber piezoelectric sensor by straight PVDF/nanoclay nanofibers , 2016 .

[14]  Ozan Aktas,et al.  Spontaneous high piezoelectricity in poly(vinylidene fluoride) nanoribbons produced by iterative thermal size reduction technique. , 2014, ACS nano.

[15]  John Alexander,et al.  Modulation of anisotropy in electrospun tissue-engineering scaffolds: Analysis of fiber alignment by the fast Fourier transform. , 2006, Biomaterials.