Relationship Among Input-Force, Payload, Stiffness, and Displacement of a 6-DOF Perpendicular Parallel Micromanipulator

[1]  A. Ghosal,et al.  An algebraic formulation of kinematic isotropy and design of isotropic 6-6 Stewart platform manipulators , 2008 .

[2]  Tatsuo Arai,et al.  Force control system for autonomous micro-manipulation , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[3]  Stuart T. Smith,et al.  ELLIPTICAL FLEXURE HINGES , 1997 .

[4]  Fumihito Arai,et al.  Design and dextrous control of micromanipulator with 6 D.O.F , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[5]  K. Sugimoto,et al.  Synthesis of Parallel Micromanipulators , 1989 .

[6]  Jian S. Dai,et al.  Stiffness characteristics and kinematics analysis of two-link elastic underactuated manipulators , 2002, J. Field Robotics.

[7]  Duc Truong Pham,et al.  Case-based generation of adaptive product manuals , 2003 .

[8]  Placid Mathew Ferreira,et al.  A novel parallel-kinematics mechanism for integrated, multi-axis nanopositioning: Part 2: Dynamics, control and performance analysis , 2008 .

[9]  S. Kim,et al.  Development of a piezoelectric actuator using a three-dimensional bridge-type hinge mechanism , 2003 .

[11]  Makoto Mizuno,et al.  Displacement amplification and reduction by means of linkage. , 1990 .

[12]  Chang-Soo Han,et al.  Modeling, synthesis, analysis, and design of high resolution micromanipulator to enhance robot accuracy , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.

[13]  Qingsong Xu,et al.  Design modification of a 3-PRC compliant parallel micromanipulator for micro/nano scale manipulation , 2007, 2007 7th IEEE Conference on Nanotechnology (IEEE NANO).

[14]  G W Ellis,et al.  Piezoelectric Micromanipulators: Electrically operated micromanipulators add automatic high-speed movement to normal manual control. , 1962, Science.

[15]  Nicolae Lobontiu,et al.  Two-axis flexure hinges with axially-collocated and symmetric notches , 2003 .

[16]  Tatsuo Arai,et al.  Development of a micro-manipulation system having a two-fingered micro-hand , 1999, IEEE Trans. Robotics Autom..

[17]  Nicolae Lobontiu,et al.  Design of symmetric conic-section flexure hinges based on closed-form compliance equations , 2002 .

[18]  J. C. Hudgens.  A Fully-Parallel Six Degree-of-Freedom Micromanipulator. Kinematic Analysis and Dynamic Model , 1988 .

[19]  Qingsong Xu,et al.  Novel design of a 3-PUU spatial compliant parallel micromanipulator for nanomanipulation , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[20]  I. Chen,et al.  Design and nonlinear modeling of a large-displacement XYZ flexure parallel mechanism with decoupled kinematic structure , 2006 .

[21]  J. M. Paros,et al.  Flexure Pivots to Replace Knife Edge and Ball Bearing , 1965 .

[22]  Kenneth J. Waldron,et al.  Series-Parallel Dualities in Actively Coordinated Mechanisms , 1988, Int. J. Robotics Res..

[23]  Liu Pin.  Design and Analysis of 2-DOF Nanopositioning Stage Drived by PZT , 2002 .

[24]  Quan Zhou,et al.  A 3-DOF piezohydraulic parallel micromanipulator , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[25]  Simon Henein,et al.  Design of parallel robots in microrobotics , 1997, Robotica.

[26]  Kee-Bong Choi,et al.  Development of Nano Order Manipulation System based on 3-PPR Planar Parallel Mechanism , 2004, 2004 IEEE International Conference on Robotics and Biomimetics.

[27]  Sujin Park,et al.  A mathematical approach for analyzing ultra precision positioning system with compliant mechanism , 2005 .

[28]  Nicolae Lobontiu,et al.  Corner-Filleted Flexure Hinges , 2001 .

[29]  Qingsong Xu,et al.  Statics and dynamics performance evaluation for a high precision XYZ compliant parallel micromanipulator , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[30]  Ian W. Hunter,et al.  Manipulation and dynamic mechanical testing of microscopic objects using a tele-micro-robot system , 1990 .

[31]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[32]  J. Paros.  How to design flexure hinges , 1965 .

[33]  Placid Mathew Ferreira,et al.  A novel parallel-kinematics mechanisms for integrated, multi-axis nanopositioning: Part 1. Kinematics and design for fabrication , 2008 .

[34]  Matthew R. Glucksberg,et al.  A six degree of freedom micromanipulator for ophthalmic surgery , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.