Enabling Multi-Channel Backscatter Communication for Bluetooth Low Energy

Backscatter offers a novel low-cost and low-energy solution for tags to communicate with existing wireless devices. The latest Bluetooth standards (i.e., Bluetooth 4. x and Bluetooth 5) use the Bluetooth Low Energy technology, which is the mainstream of the current Bluetooth market. In this paper, we present multi-channel backscatter with BLE, a BLE backscatter communication system that achieves compatibility with standard BLE devices. Tag information in backscatter communication can be directly obtained from backscatter packets with a single BLE receiver. We present the first multichannel backscatter tag design and build a prototype of our tag using an FPGA and evaluate it with BLE devices. Our evaluation shows that the tag can backscatter BLE signals in a channel-hopping manner, which can be decoded by standard BLE devices. Results demonstrate that our backscatter system can achieve a goodput of up to 2.8 kbps.

[1]  Anantha Chandrakasan,et al.  Caraoke: An E-Toll Transponder Network for Smart Cities , 2015, Comput. Commun. Rev..

[2]  Sachin Katti,et al.  FreeRider: Backscatter Communication Using Commodity Radios , 2017, CoNEXT.

[3]  Joshua R. Smith,et al.  PASSIVE WI-FI: Bringing Low Power to Wi-Fi Transmissions , 2016, GETMBL.

[4]  Sachin Katti,et al.  BackFi: High Throughput WiFi Backscatter , 2015, SIGCOMM.

[5]  Jiangchuan Liu,et al.  Spatial Stream Backscatter Using Commodity WiFi , 2018, MobiSys.

[6]  Matthew S. Reynolds,et al.  BLE-Backscatter: Ultralow-Power IoT Nodes Compatible With Bluetooth 4.0 Low Energy (BLE) Smartphones and Tablets , 2017, IEEE Transactions on Microwave Theory and Techniques.

[7]  Joshua R. Smith,et al.  Wi-fi backscatter , 2014, SIGCOMM 2015.

[8]  Joshua R. Smith,et al.  Battery-Free Cellphone , 2017, Proc. ACM Interact. Mob. Wearable Ubiquitous Technol..

[9]  Si Chen,et al.  Reliable Backscatter with Commodity BLE , 2020, IEEE INFOCOM 2020 - IEEE Conference on Computer Communications.

[10]  David Wetherall,et al.  Ambient backscatter: wireless communication out of thin air , 2013, SIGCOMM.

[11]  Matthew S. Reynolds,et al.  A 1.0-Mb/s 198-pJ/bit Bluetooth Low-Energy Compatible Single Sideband Backscatter Uplink for the NeuroDisc Brain–Computer Interface , 2019, IEEE Transactions on Microwave Theory and Techniques.

[12]  Joshua R. Smith,et al.  Inter-Technology Backscatter: Towards Internet Connectivity for Implanted Devices , 2016, SIGCOMM.

[13]  Sachin Katti,et al.  HitchHike: Practical Backscatter Using Commodity WiFi , 2016, SenSys.

[14]  Joshua R. Smith,et al.  FM Backscatter: Enabling Connected Cities and Smart Fabrics , 2017, NSDI.

[15]  Jim Tatsukawa.  MMCM and PLL Dynamic Reconfiguration , 2012 .

[16]  Mohammad Rostami,et al.  Enabling Practical Backscatter Communication for On-body Sensors , 2016, SIGCOMM.

[17]  Guobin Shen,et al.  PassiveVLC: Enabling Practical Visible Light Backscatter Communication for Battery-free IoT Applications , 2017, MobiCom.

[18]  Jiangchuan Liu,et al.  X-Tandem: Towards Multi-hop Backscatter Communication with Commodity WiFi , 2018, MobiCom.

[19]  Deepak Ganesan,et al.  Enabling Bit-by-Bit Backscatter Communication in Severe Energy Harvesting Environments , 2014, NSDI.

[20]  Pan Hu,et al.  Laissez-Faire: Fully Asymmetric Backscatter Communication , 2015, SIGCOMM.

[21]  Xiaojiang Chen,et al.  PLoRa: a passive long-range data network from ambient LoRa transmissions , 2018, SIGCOMM.

[22]  Joshua R. Smith,et al.  LoRa Backscatter: Enabling The Vision of Ubiquitous Connectivity , 2017 .

[23]  Thiemo Voigt,et al.  LoRea: A Backscatter Architecture that Achieves a Long Communication Range , 2016, SenSys.

[24]  Mohammad Rostami,et al.  Braidio: An Integrated Active-Passive Radio for Mobile Devices with Asymmetric Energy Budgets , 2016, SIGCOMM.

[25]  Matthew S. Reynolds,et al.  Every smart phone is a backscatter reader: Modulated backscatter compatibility with Bluetooth 4.0 Low Energy (BLE) devices , 2015, 2015 IEEE International Conference on RFID (RFID).