A Competitive Solvation of Ternary Eutectic Electrolytes Tailoring the Electrode/Electrolyte Interphase for Lithium Metal Batteries.

The development of electrolytes with high safety, high ionic conductivity, and the ability to inhibit lithium dendrites growth is crucial for the fabrication of high-energy-density lithium metal batteries. In this study, a ternary eutectic electrolyte is designed with LiTFSI (TFSI = bis(trifluoromethanesulfonyl)imide), butyrolactam (BL), and succinonitrile (SN). This electrolyte exhibits a high ion conductivity, nonflammability, and a wide electrochemical window. The competitive solvation effect among SN, BL, and Li+ reduces the viscosity and improves the stability of the eutectic electrolyte. The preferential coordination of BL toward Li+ facilitates the formation of stable solid electrolyte interphase films, leading to homogeneous and dendrite-free Li plating. As expected, the LiFePO4/Li cell with this ternary eutectic electrolyte delivers a high capacity retention of 90% after 500 cycles at 2 C and an average Coulombic efficiency of 99.8%. Moreover, Ni-rich LiNi0.8Co0.1Al0.1O2/Li and LiNi0.8Co0.1Mn0.1O2/Li cells based on the modified ternary eutectic electrolyte achieve an outstanding cycling performance. This study provides insights for understanding and designing better electrolytes for lithium metal batteries and analogous sodium/potassium metal batteries.

[1]  L. Ci,et al.  Safe and Stable Lithium Metal Batteries Enabled by an Amide-Based Electrolyte , 2022, Nano-Micro Letters.

[2]  Siyuan Li,et al.  Dual-salt-additive electrolyte enables high-voltage lithium metal full batteries capable of fast-charging ability , 2021 .

[3]  Jiayan Luo,et al.  High Energy Density Solid State Lithium Metal Batteries Enabled by Sub‐5 µm Solid Polymer Electrolytes , 2021, Advanced materials.

[4]  Yongyao Xia,et al.  Advanced Electrolyte Design for High‐Energy‐Density Li‐Metal Batteries under Practical Conditions , 2021, Angewandte Chemie.

[5]  Yunhui Huang,et al.  Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase , 2021, Advanced materials.

[6]  Qichun Zhang,et al.  Recent Advance in Ionic‐Liquid‐Based Electrolytes for Rechargeable Metal‐Ion Batteries , 2021, Advanced science.

[7]  W. He,et al.  Challenges and Recent Advances in High Capacity Li‐Rich Cathode Materials for High Energy Density Lithium‐Ion Batteries , 2021, Advanced materials.

[8]  X. Qin,et al.  Deep Eutectic Solvents for Boosting Electrochemical Energy Storage and Conversion: A Review and Perspective , 2021, Advanced Functional Materials.

[9]  Pei Dong,et al.  A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase , 2021, Advanced Energy Materials.

[10]  Henghui Zhou,et al.  Advanced electrolyte design for stable lithium metal anode: From liquid to solid , 2021 .

[11]  G. Cao,et al.  Artificial interface stabilized LiNi0.80Co0.15Al0.05O2@Polysiloxane cathode for stable cycling lithium-ion batteries , 2020, Journal of Power Sources.

[12]  Lei Fan,et al.  Synergistic Dual-Additives Electrolyte enables Practical Lithium Metal Batteries. , 2020, Angewandte Chemie.

[13]  R. Tatara,et al.  Highly concentrated LiN(SO2CF3)2/dinitrile electrolytes: Liquid structures, transport properties, and electrochemistry. , 2020, The Journal of chemical physics.

[14]  Xiulin Fan,et al.  Countersolvent Electrolytes for Lithium‐Metal Batteries , 2020, Advanced Energy Materials.

[15]  Yong Lu,et al.  Prospects of organic electrode materials for practical lithium batteries , 2020, Nature Reviews Chemistry.

[16]  Yong‐Mook Kang,et al.  Advances in the Cathode Materials for Making a Breakthrough in the Li Rechargeable Batteries. , 2020, Angewandte Chemie.

[17]  G. Cui,et al.  Zinc anode-compatible in-situ solid electrolyte interphase via cation solvation modulation , 2019, Nature Communications.

[18]  Jiayan Luo,et al.  Dendrites in Lithium Metal Anodes: Suppression, Regulation, and Elimination. , 2019, Accounts of chemical research.

[19]  J. Yu,et al.  Towards succinonitrile-based lithium metal batteries with long cycle life: The influence of fluoroethylene carbonate loading and the separator , 2019, Journal of Power Sources.

[20]  Tingzheng Hou,et al.  The influence of FEC on the solvation structure and reduction reaction of LiPF6/EC electrolytes and its implication for solid electrolyte interphase formation , 2019, Nano Energy.

[21]  D. Lemordant,et al.  Alternative Electrolytes for Li-Ion Batteries Using Glutaronitrile and 2-methylglutaronitrile with Lithium Bis(trifluoromethanesulfonyl) Imide , 2019, Journal of The Electrochemical Society.

[22]  M. Bazant,et al.  Interactions between Lithium Growths and Nanoporous Ceramic Separators , 2018, Joule.

[23]  Chong Yan,et al.  Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries. , 2018, Angewandte Chemie.

[24]  Fengli Yu,et al.  Formation and Extractive Desulfurization Mechanisms of Aromatic Acid Based Deep Eutectic Solvents: An Experimental and Theoretical Study. , 2018, Chemistry.

[25]  Ji‐Guang Zhang,et al.  Stable cycling of high-voltage lithium metal batteries in ether electrolytes , 2018, Nature Energy.

[26]  Ji‐Guang Zhang,et al.  High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases , 2018 .

[27]  Jiaqi Huang,et al.  Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition , 2018, Advanced materials.

[28]  Ya‐Xia Yin,et al.  High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries , 2018, Advanced materials.

[29]  Tianyou Zhai,et al.  Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries , 2017, Advanced materials.

[30]  Peter Lamp,et al.  Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives , 2017 .

[31]  J. Qian,et al.  Enhanced Performance of a Lithium-Sulfur Battery Using a Carbonate-Based Electrolyte. , 2016, Angewandte Chemie.

[32]  Doron Aurbach,et al.  Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .

[33]  Yang-Kook Sun,et al.  Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .

[34]  O. Borodin,et al.  High rate and stable cycling of lithium metal anode , 2015, Nature Communications.

[35]  Kang Xu,et al.  Electrolytes and interphases in Li-ion batteries and beyond. , 2014, Chemical reviews.

[36]  Yuki Yamada,et al.  Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. , 2014, Journal of the American Chemical Society.

[37]  Jae-Hun Kim,et al.  Metallic anodes for next generation secondary batteries. , 2013, Chemical Society reviews.

[38]  Michel Armand,et al.  A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries , 2013, Nature Communications.

[39]  Tian Lu,et al.  Quantitative analysis of molecular surface based on improved Marching Tetrahedra algorithm. , 2012, Journal of molecular graphics & modelling.

[40]  Tian Lu,et al.  Multiwfn: A multifunctional wavefunction analyzer , 2012, J. Comput. Chem..

[41]  Daniel M. Seo,et al.  Electrolyte Solvation and Ionic Association II. Acetonitrile-Lithium Salt Mixtures: Highly Dissociated Salts , 2012 .

[42]  Frank Neese,et al.  The ORCA program system , 2012 .

[43]  Stefan Grimme,et al.  Effect of the damping function in dispersion corrected density functional theory , 2011, J. Comput. Chem..

[44]  S. Grimme,et al.  A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. , 2010, The Journal of chemical physics.

[45]  Julia Contreras-García,et al.  Revealing noncovalent interactions. , 2010, Journal of the American Chemical Society.

[46]  M. Armand,et al.  Building better batteries , 2008, Nature.

[47]  F. Weigend,et al.  Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy. , 2005, Physical chemistry chemical physics : PCCP.

[48]  Yong‐Sheng Hu,et al.  Novel room temperature molten salt electrolyte based on LiTFSI and acetamide for lithium batteries , 2004 .

[49]  K Schulten,et al.  VMD: visual molecular dynamics. , 1996, Journal of molecular graphics.

[50]  P. Kollman,et al.  A well-behaved electrostatic potential-based method using charge restraints for deriving atomic char , 1993 .