Design and experimental operation of a control strategy for the buck-boost DC-AC Inverter

The buck-boost DC-AC inverter generates an alternating output voltage as the differential voltage of two DC-DC individual buck-boost converters that are driven with two 180/spl deg/ phase-shifted DC-biased sinusoidal references. The peak value of the inverter alternating output voltage does not depend on the direct input voltage. In addition, an advantage over the Boost DC-AC inverter is that the output voltages of both Buck-Boost converters are also independent of the direct input voltage. The difficulty of the topology lies in the control of both buck-boost DC-DC converters as they are required to work with variable operating-points. A double-loop control strategy is proposed for the buck-boost DC-DC converter with a new inner control loop for the inductor current and also a new outer control loop for the output voltage. These control schemes include different compensations that make possible a fast and accurate control of both converters with variable operating points. With these compensations, the controllers are easy to design, implement and develop. Furthermore, feedforward loops are included to increase the robustness of the inverter to external disturbances in both the input voltage and output load. The proposed control strategy is designed and implemented on a prototype 1.5 kW buck-boost DC-AC inverter. The control strategy is validated by means of both simulation and experimental tests. The results show that the proposed strategy achieves a robust, reliable and accurate control of the inverter even in hard situations such as nonlinear loads, sudden load changes and transient short circuits.

[1]  R. D. Middlebrook,et al.  Topics in Multiple-Loop Regulators and Current-Mode Programming , 1987, IEEE Transactions on Power Electronics.

[2]  E. Gubia,et al.  Buck-boost DC-AC inverter: proposal for a new control strategy , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[3]  Francesc Guinjoan,et al.  Sliding mode control of a boost-buck converter for AC signal tracking task , 1999, ISCAS'99. Proceedings of the 1999 IEEE International Symposium on Circuits and Systems VLSI (Cat. No.99CH36349).

[4]  M. Kazimierczuk.  Synthesis of phase-modulated resonant DC/AC inverters and DC/DC convertors , 1992 .

[5]  R.O. Caceres,et al.  A buck-boost DC-AC converter: operation, analysis, and control , 1998, 6th IEEE Power Electronics Congress. Technical Proceedings. CIEP 98 (Cat. No.98TH8375).

[6]  R. O. Caceres,et al.  A boost DC-AC converter: analysis, design, and experimentation , 1999 .

[7]  V. Jagannathan,et al.  Synthesis of nonlinear control of switching topologies of buck-boost converter using fuzzy logic , 2000, Proceedings of the 17th IEEE Instrumentation and Measurement Technology Conference [Cat. No. 00CH37066].

[8]  Jesus Leyva-Ramos,et al.  Robust stability analysis for current-programmed regulators , 2002, IEEE Trans. Ind. Electron..

[9]  L. H. Dixon,et al.  Average current mode control of switching power supplies , 1990 .

[10]  N. Vazquez,et al.  Analysis and experimental study of the buck, boost and buck-boost inverters , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[11]  Fred C. Lee,et al.  Small-signal modeling of average current-mode control , 1993 .

[12]  E. Lefeuvre,et al.  A new control strategy for the boost DC-AC inverter , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[13]  Paolo Tenti,et al.  General-purpose sliding-mode controller for DC/DC converter applications , 1993, Proceedings of IEEE Power Electronics Specialist Conference - PESC '93.

[14]  Marko V. Jankovic,et al.  Tuned-average current-mode control of constant frequency DC/DC converters , 1997, ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics.

[15]  Simone Buso,et al.  Design of a robust voltage controller for a buck-boost converter using μ-synthesis , 1999, IEEE Trans. Control. Syst. Technol..

[16]  Seigo Sasaki,et al.  Systematic approach to robust nonlinear voltage control of buck/boost converter , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[17]  R. Caceres,et al.  Robust PID control of a buck-boost DC-AC converter , 2000, INTELEC. Twenty-Second International Telecommunications Energy Conference (Cat. No.00CH37131).

[18]  J. Arau,et al.  Some critical aspects in sliding mode control design for the boost inverter , 1998, 6th IEEE Power Electronics Congress. Technical Proceedings. CIEP 98 (Cat. No.98TH8375).

[19]  Slobodan Cuk,et al.  A general unified approach to modelling switching-converter power stages , 1976, 1970 IEEE Power Electronics Specialists Conference.