Preparation and characterization of grafted imprinted monolith for capillary electrochromatography

In this paper, a molecularly imprinted polymer (MIP) coating grafted to a trimethylolpropane trimethacrylate (TRIM) core material for CEC was reported. The core monolith was prepared with a solution of 20% (w/w) TRIM in a mixture of porogen and a polymerization precursor, which can generate a stable electroosmotic flow due to the formation of ionizable groups after postpolymerization hydrolization. Graft polymerization took place on the resultant TRIM monolith with a mixture of template, methacrylic acid, and ethylene glycol dimethacrylate. Strong recognition ability (selectivity factor was 5.83) for S‐amlodipine and resolution of enatiomers separation (up to 7.99) were obtained on the resulting grafted imprinted monolith in CEC mode. The influence of CEC conditions on chiral separation, including the composition of mobile phase, pH value, and the operating voltages was studied. These results suggest that the method of grafted polymerization reported here allows a rapid development of MIP monolith once core materials with desired properties are available, and is a good alternative to prepare CEC‐based monolithic MIPs.

[1]  Claudia Sulitzky,et al.  An improved grafting technique for producing imprinted thin film composite beads , 2012 .

[2]  Liang Zhao,et al.  Preparation and characterization of imprinted monolith with metal ion as pivot. , 2011, Journal of chromatography. A.

[3]  Yanping Huang,et al.  Coatings of one monomer molecularly imprinted polymers for open tubular capillary electrochromatography. , 2011, Journal of chromatography. A.

[4]  Yanping Huang,et al.  Recent developments and applications of molecularly imprinted monolithic column for HPLC and CEC. , 2011, Journal of separation science.

[5]  Q. Deng,et al.  Preparation, characterization and application of organic-inorganic hybrid ractopamine multi-template molecularly imprinted capillary monolithic column. , 2011, Analytica chimica acta.

[6]  Bao-Yu Huang,et al.  Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography. , 2011, Journal of chromatography. A.

[7]  Xiwen He,et al.  A thermosensitive monolithic column as an artificial antibody for the on-line selective separation of the protein. , 2011, Chemistry.

[8]  Sergey A Piletsky,et al.  Advances in the manufacture of MIP nanoparticles. , 2010, Trends in biotechnology.

[9]  Guozhen Fang,et al.  Preparation and characterization of molecularly imprinted silica monolith for screening sulfamethazine. , 2010, Journal of separation science.

[10]  L. Zhang,et al.  Macroporous molecularly imprinted monolithic polymer columns for protein recognition by liquid chromatography. , 2010, Journal of separation science.

[11]  Zeng-hong Xie,et al.  Preparation and characterization of a molecularly imprinted monolithic column for pressure‐assisted CEC separation of nitroimidazole drugs , 2010, Electrophoresis.

[12]  Qiang Fu,et al.  In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study , 2010 .

[13]  Liang Zhao,et al.  Characterization of Convection for Molecularly Imprinted Monolith , 2010 .

[14]  Xiwen He,et al.  Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography. , 2009, Journal of chromatography. A.

[15]  Xiwen He,et al.  Organic-inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization. , 2009, Journal of separation science.

[16]  Yanping Huang,et al.  Preparation and Characterization of a Low-Density Imprinted Monolithic Column , 2009 .

[17]  P. Spégel,et al.  Novel Vinylpyridine Based Cationic MIP Monoliths for Enantiomer Separation in CEC , 2009 .

[18]  B. Sellergren,et al.  A phosphotyrosine-imprinted polymer receptor for the recognition of tyrosine phosphorylated peptides. , 2008, Chemistry.

[19]  E. Turiel,et al.  Molecularly imprinted capillary electrochromatography for selective determination of thiabendazole in citrus samples. , 2008, Journal of chromatography. A.

[20]  H. Zou,et al.  Preparation and evaluation of a molecularly imprinted polymer derivatized silica monolithic column for capillary electrochromatography and capillary liquid chromatography. , 2007, Analytical chemistry.

[21]  H.‐F. Wang,et al.  A Room Temperature Ionic Liquid (RTIL)‐Mediated, Non‐Hydrolytic Sol–Gel Methodology to Prepare Molecularly Imprinted, Silica‐Based Hybrid Monoliths for Chiral Separation , 2006 .

[22]  Q. Deng,et al.  (S)‐Ibuprofen‐imprinted polymers incorporating γ‐methacryloxypropyl‐trimethoxysilane for CEC separation of ibuprofen enantiomers , 2006, Electrophoresis.

[23]  H. Zou,et al.  Determination of DL-tetrahydropalmatine in Corydalis yanhusuo by L-tetrahydropalmatine imprinted monolithic column coupling with reversed-phase high performance liquid chromatography. , 2006, Journal of chromatography. A.

[24]  B. Sellergren,et al.  Molecularly imprinted polymers grafted to flow through poly(trimethylolpropane trimethacrylate) monoliths for capillary-based solid-phase extraction. , 2006, Journal of chromatography. A.

[25]  Maria-Magdalena Titirici,et al.  Thin Molecularly Imprinted Polymer Films via Reversible Addition−Fragmentation Chain Transfer Polymerization , 2006 .

[26]  L. Nie,et al.  Separation and purification of chlorogenic acid by molecularly imprinted polymer monolithic stationary phase. , 2005, Journal of chromatography. A.

[27]  Junfa Yin,et al.  Rapid and efficient chiral separation of nateglinide and its L-enantiomer on monolithic molecularly imprinted polymers. , 2005, Journal of chromatography. A.

[28]  Zhaosheng Liu,et al.  Mechanism of molecular recognition on molecular imprinted monolith by capillary electrochromatography. , 2005, Journal of chromatography. A.

[29]  Zhaosheng Liu,et al.  Chiral recognition ability of an (S)‐naproxen‐ imprinted monolith by capillary electrochromatography , 2005, Electrophoresis.

[30]  Chao Yan,et al.  Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography , 2004 .

[31]  Zhaosheng Liu,et al.  Chiral Separation of Binaphthol Enantiomers on Molecularly Imprinted Polymer Monolith by Capillary Electrochromatography , 2004, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[32]  L. Schweitz.  Molecularly imprinted polymer coatings for open-tubular capillary electrochromatography prepared by surface initiation. , 2002, Analytical chemistry.

[33]  L. Andersson,et al.  Molecularly imprinted CEC sorbents: investigations into polymer preparation and electrolyte composition. , 2002, The Analyst.

[34]  L. Andersson,et al.  Rapid electrochromatographic enantiomer separations on short molecularly imprinted polymer monoliths , 2001 .

[35]  E. Vulfson,et al.  Surface imprinting of cholesterol on Submicrometer core-shell emulsion particles , 2001 .

[36]  A. Rathore,et al.  Electrosmotic mobility and conductivity in columns for capillary electrochromatography. , 1999, Analytical chemistry.

[37]  L. Andersson,et al.  Capillary electrochromatography with molecular imprint-based selectivity for enantiomer separation of local anaesthetics , 1997 .

[38]  K. Uchiyama,et al.  Capillary electrochromatographic separation of amino acid enantiomers using on-column prepared molecularly imprinted polymer. , 1997, Journal of pharmaceutical and biomedical analysis.

[39]  L. Andersson,et al.  Capillary Electrochromatography with Predetermined Selectivity Obtained through Molecular Imprinting , 1997 .

[40]  Kenji Yokoyama,et al.  Molecular recognition in continuous polymer rods prepared by a molecular imprinting technique , 1993 .

[41]  R. Isaksson,et al.  Preparation and properties of porous particles from trimethylolpropane trimethacrylate , 1991 .

[42]  G. Guiochon,et al.  Comparison of the thermodynamic properties of particulate and monolithic columns of molecularly imprinted copolymers. , 2005, Analytical chemistry.

[43]  Börje Sellergren,et al.  Grafting of Molecularly Imprinted Polymer Films on Silica Supports Containing Surface-Bound Free Radical Initiators , 2002 .

[44]  G. Wulff,et al.  Enzyme-like catalysis by molecularly imprinted polymers. , 2002, Chemical reviews.