Influence of Headgroups in Ethylene-Tetrafluoroethylene-Based Radiation-Grafted Anion Exchange Membranes for CO2 Electrolysis

The performance of zero-gap CO2 electrolysis (CO2E) is significantly influenced by the membrane’s chemical structure and physical properties due to its effects on the local reaction environment and water/ion transport. Radiation-grafted anion-exchange membranes (RG-AEM) have demonstrated high ionic conductivity and durability, making them a promising alternative for CO2E. These membranes were fabricated using two different thicknesses of ethylene-tetrafluoroethylene polymer substrates (25 and 50 μm) and three different headgroup chemistries: benzyl-trimethylammonium, benzyl-N-methylpyrrolidinium, and benzyl-N-methylpiperidinium (MPIP). Our membrane characterization and testing in zero-gap cells over Ag electrocatalysts under commercially relevant conditions showed correlations between the water uptake, ionic conductivity, hydration, and cationic-head groups with the CO2E efficiency. The thinner 25 μm-based AEM with the MPIP-headgroup (ion-exchange capacities of 2.1 ± 0.1 mmol g–1) provided balanced in situ test characteristics with lower cell potentials, high CO selectivity, reduced liquid product crossover, and enhanced water management while maintaining stable operation compared to the commercial AEMs. The CO2 electrolyzer with an MPIP-AEM operated for over 200 h at 150 mA cm–2 with CO selectivities up to 80% and low cell potentials (around 3.1 V) while also demonstrating high conductivities and chemical stability during performance at elevated temperatures (above 60 °C).

[1]  Jeremy T. Feaster,et al.  Gas diffusion electrodes, reactor designs and key metrics of low-temperature CO2 electrolysers , 2022, Nature Energy.

[2]  C. Janáky,et al.  Anode Catalysts in CO2 Electrolysis: Challenges and Untapped Opportunities , 2022, ACS catalysis.

[3]  S. Holdcroft,et al.  Permselectivity of ionene-based, Aemion® anion exchange membranes , 2022, Journal of Membrane Science.

[4]  J. Varcoe,et al.  How membrane characteristics influence the performance of CO2 and CO electrolysis , 2022, Energy & Environmental Science.

[5]  P. Webley,et al.  Electroreduction of CO2/CO to C2 Products: Process Modeling, Downstream Separation, System Integration, and Economic Analysis , 2021, Industrial & engineering chemistry research.

[6]  A. Bell,et al.  Tailored catalyst microenvironments for CO2 electroreduction to multicarbon products on copper using bilayer ionomer coatings , 2021, Nature Energy.

[7]  Xiaoyan Luo,et al.  Anion Exchange Ionomers: Impact of Chemistry on Thin‐Film Properties , 2021, Advanced Functional Materials.

[8]  D. Sebők,et al.  Operando cathode activation with alkali metal cations for high current density operation of water-fed zero-gap carbon dioxide electrolyzers , 2021, Nature Energy.

[9]  Christine M. Gabardo,et al.  Designing anion exchange membranes for CO2 electrolysers , 2021, Nature Energy.

[10]  Danielle A. Salvatore,et al.  An industrial perspective on catalysts for low-temperature CO2 electrolysis , 2021, Nature Nanotechnology.

[11]  C. Berlinguette,et al.  Quantification of water transport in a CO2 electrolyzer , 2020, Energy & Environmental Science.

[12]  D. Jacobson,et al.  Boosting Membrane Hydration for High Current Densities in Membrane Electrode Assembly CO2 Electrolysis. , 2020, ACS applied materials & interfaces.

[13]  Y. Yan,et al.  High carbonate ion conductance of a robust PiperION membrane allows industrial current density and conversion in a zero-gap carbon dioxide electrolyzer cell , 2020, Energy & Environmental Science.

[14]  Z. Pan,et al.  Ion Transport Characteristics in Membranes for Direct Formate Fuel Cells , 2020, Frontiers in Chemistry.

[15]  F. Jiao,et al.  Investigation of CO2 single-pass conversion in a flow electrolyzer , 2020 .

[16]  Sung-Fu Hung,et al.  High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer , 2020 .

[17]  I. Chorkendorff,et al.  Role of ion-selective membranes in the carbon balance for CO2 electroreduction via gas diffusion electrode reactor designs† , 2020, Chemical science.

[18]  Dario R. Dekel,et al.  Quantifying the critical effect of water diffusivity in anion exchange membranes for fuel cell applications , 2020 .

[19]  B. Han,et al.  Highly Efficient Electroreduction of CO2 to C2+ Alcohols on Heterogeneous Dual Active Sites. , 2020, Angewandte Chemie.

[20]  Ali Seifitokaldani,et al.  Electrochemical Reactors for CO2 Conversion , 2020, Catalysts.

[21]  D. Dvorak,et al.  Managing Hydration at the Cathode Enables Efficient CO2 Electrolysis at Commercially Relevant Current Densities , 2020 .

[22]  A. Cipollina,et al.  Effect of ion exchange capacity and water uptake on hydroxide transport in PSU-TMA membranes: A DFT and molecular dynamics study , 2020 .

[23]  Wilson A. Smith,et al.  Facet-Dependent Selectivity of Cu Catalysts in Electrochemical CO2 Reduction at Commercially Viable Current Densities , 2020, ACS catalysis.

[24]  Kwangyeol Lee,et al.  Potential Link between Cu Surface and Selective CO2 Electroreduction: Perspective on Future Electrocatalyst Designs , 2020, Advanced materials.

[25]  Matthias Wessling,et al.  Rational design of ion exchange membrane material properties limits the crossover of CO2 reduction products in artificial photosynthesis devices. , 2020, ACS Applied Materials and Interfaces.

[26]  K. Miyatake,et al.  Partially fluorinated copolymers containing pendant piperidinium head groups as anion exchange membranes for alkaline fuel cells , 2019, RSC advances.

[27]  Matthias Wessling,et al.  Preparation and characterization of crosslinked poly(vinylimidazolium) anion exchange membranes for artificial photosynthesis , 2019, Journal of Materials Chemistry A.

[28]  I. Chorkendorff,et al.  Analysis of Mass Flows and Membrane Crossover in CO2 Reduction at High Current Densities in a MEA-Type Electrolyzer. , 2019, ACS applied materials & interfaces.

[29]  Cass T. Miller,et al.  Influence of Water Uptake, Charge, Manning Parameter, and Contact Angle on Water and Salt Transport in Commercial Ion Exchange Membranes , 2019, Industrial & Engineering Chemistry Research.

[30]  Fikile R. Brushett,et al.  Investigating Electrode Flooding in a Flowing Electrolyte, Gas-Fed Carbon Dioxide Electrolyzer. , 2019, ChemSusChem.

[31]  N. Wagner,et al.  Influence of Temperature on the Performance of Gas Diffusion Electrodes in the CO 2 Reduction Reaction , 2019, ChemElectroChem.

[32]  S. Adhikari,et al.  Molecular Engineering of Hydroxide Conducting Polymers for Anion Exchange Membranes in Electrochemical Energy Conversion Technology. , 2019, Accounts of chemical research.

[33]  L. Zhuang,et al.  An alkaline polymer electrolyte CO2 electrolyzer operated with pure water , 2019, Energy & Environmental Science.

[34]  Alexis T. Bell,et al.  Towards membrane-electrode assembly systems for CO2 reduction: a modeling study , 2019, Energy & Environmental Science.

[35]  W. Mustain,et al.  Radiation-grafted anion-exchange membranes: the switch from low- to high-density polyethylene leads to remarkably enhanced fuel cell performance , 2019, Energy & Environmental Science.

[36]  Wilson A. Smith,et al.  CO2 reduction on gas-diffusion electrodes and why catalytic performance must be assessed at commercially-relevant conditions , 2019, Energy & Environmental Science.

[37]  Hyunjoo J. Lee,et al.  Electrochemical CO2 reduction using alkaline membrane electrode assembly on various metal electrodes , 2019, Journal of CO2 Utilization.

[38]  T. Jaramillo,et al.  What would it take for renewably powered electrosynthesis to displace petrochemical processes? , 2019, Science.

[39]  Paul J. A. Kenis,et al.  Co-electrolysis of CO2 and glycerol as a pathway to carbon chemicals with improved technoeconomics due to low electricity consumption , 2019, Nature Energy.

[40]  M. Jaroniec,et al.  Understanding the Roadmap for Electrochemical Reduction of CO2 to Multi-Carbon Oxygenates and Hydrocarbons on Copper-Based Catalysts. , 2019, Journal of the American Chemical Society.

[41]  E. Ticianelli,et al.  ETFE-based anion-exchange membrane ionomer powders for alkaline membrane fuel cells: a first performance comparison of head-group chemistry , 2018 .

[42]  R. Masel,et al.  CO2 Electrolysis to CO and O2 at High Selectivity, Stability and Efficiency Using Sustainion Membranes , 2018 .

[43]  Stafford W. Sheehan,et al.  Progress toward Commercial Application of Electrochemical Carbon Dioxide Reduction , 2018, Chem.

[44]  G. Tew,et al.  Thermodynamics of Counterion Release Is Critical for Anion Exchange Membrane Conductivity. , 2018, Journal of the American Chemical Society.

[45]  L. Zhuang,et al.  Alkaline polymer electrolyte fuel cells stably working at 80 °C , 2018, Journal of Power Sources.

[46]  Danielle A. Salvatore,et al.  Electrolytic CO2 Reduction in a Flow Cell. , 2018, Accounts of chemical research.

[47]  T. Zawodzinski,et al.  Effect of CO 2 absorption on ion and water mobility in an anion exchange membrane , 2018 .

[48]  Feng Jiao,et al.  General Techno-Economic Analysis of CO2 Electrolysis Systems , 2018 .

[49]  S. Holdcroft,et al.  Water permeation through anion exchange membranes , 2018 .

[50]  S. Qiao,et al.  Carbon Solving Carbon's Problems: Recent Progress of Nanostructured Carbon‐Based Catalysts for the Electrochemical Reduction of CO2 , 2017 .

[51]  A. Herring,et al.  Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability , 2017 .

[52]  Feng Jiao,et al.  An Ir-based anode for a practical CO2 electrolyzer , 2017 .

[53]  M. Hickner,et al.  Cationic Side-Chain Attachment to Poly(Phenylene Oxide) Backbones for Chemically Stable and Conductive Anion Exchange Membranes , 2017 .

[54]  Robert Kutz,et al.  Sustainion Imidazolium‐Functionalized Polymers for Carbon Dioxide Electrolysis , 2017 .

[55]  Chulsung Bae,et al.  Poly(terphenylene) Anion Exchange Membranes: The Effect of Backbone Structure on Morphology and Membrane Property. , 2017, ACS macro letters.

[56]  Jifu Zheng,et al.  Novel quaternary ammonium microblock poly (p-phenylene-co-aryl ether ketone)s as anion exchange membranes for alkaline fuel cells , 2017 .

[57]  Khoiruddin,et al.  Heterogeneous structure and its effect on properties and electrochemical behavior of ion-exchange membrane , 2017 .

[58]  Himanshu N. Sarode,et al.  High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes , 2016 .

[59]  P. Strasser,et al.  Controlling the selectivity of CO2 electroreduction on copper: The effect of the electrolyte concentration and the importance of the local pH , 2016 .

[60]  Jiujun Zhang,et al.  A review of radiation-grafted polymer electrolyte membranes for alkaline polymer electrolyte membrane fuel cells , 2015 .

[61]  Liang Wu,et al.  A Novel Methodology to Synthesize Highly Conductive Anion Exchange Membranes , 2015, Scientific Reports.

[62]  Dario R. Dekel,et al.  Characterization and Chemical Stability of Anion Exchange Membranes Cross-Linked with Polar Electron-Donating Linkers , 2015 .

[63]  D. Brett,et al.  A study of the effect of water management and electrode flooding on the dimensional change of polymer electrolyte fuel cells , 2013 .

[64]  J. Varcoe,et al.  Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups , 2012 .

[65]  J. Benziger,et al.  Transport of liquid water through Nafion membranes , 2012 .

[66]  G. Centi,et al.  Carbon dioxide recycling: emerging large-scale technologies with industrial potential. , 2011, ChemSusChem.

[67]  T. Zhao,et al.  Measurements of water uptake and transport properties in anion-exchange membranes , 2010 .

[68]  Sudipta Sarkar,et al.  The Donnan membrane principle: opportunities for sustainable engineered processes and materials. , 2010, Environmental science & technology.