Head-controlled assistive telerobot with extended physiological proprioception capability

People with disabilities such as quadriplegia can use mouth-sticks and head-sticks as extension devices to perform desired manipulations. These extensions provide extended proprioception which allows users to directly feel forces and other perceptual cues such as texture present at the tip of the mouth-stick. Such devices are effective for two principle reasons: because of their close contact with the user's tactile and proprioceptive sensing abilities; and because they tend to be lightweight and very stiff, and can thus convey tactile and kinesthetic information with high-bandwidth. Unfortunately, traditional mouth-sticks and head-sticks are limited in workspace and in the mechanical power that can be transferred because of user mobility and strength limitations. We describe an alternative implementation of the head-stick device using the idea of a virtual head-stick: a head-controlled bilateral force-reflecting telerobot. In this system the end-effector of the slave robot moves as if it were at the tip of an imaginary extension of the user's head. The design goal is for the system is to have the same intuitive operation and extended proprioception as a regular mouth-stick effector but with augmentation of workspace volume and mechanical power. The input is through a specially modified six DOF master robot (a PerForceTM hand-controller) whose joints can be back-driven to apply forces at the user's head. The manipulation tasks in the environment are performed by a six degree-of-freedom slave robot (the Zebra-ZEROTM) with a built-in force sensor. We describe the prototype hardware/software implementation of the system, control system design, safety/disability issues, and initial evaluation tasks.

[1]  George C. Verghese,et al.  Design issues in 2-port network models of bilateral remote manipulation , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[2]  Dale A. Lawrence Stability and transparency in bilateral teleoperation , 1993, IEEE Trans. Robotics Autom..

[3]  R. Andres,et al.  Prediction of Head Movement Time Using Fitts’ Law , 1989 .

[4]  D C Simpson,et al.  An externally powered controlled complete arm prosthesis. , 1977, Journal of medical engineering & technology.

[5]  Blake Hannaford,et al.  Force-reflection and shared compliant control in operating telemanipulators with time delay , 1992, IEEE Trans. Robotics Autom..

[6]  Blake Hannaford,et al.  A design framework for teleoperators with kinesthetic feedback , 1989, IEEE Trans. Robotics Autom..

[7]  Blake Hannaford,et al.  Stability and performance tradeoffs in bi-lateral telemanipulation , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[8]  Blake Hannaford,et al.  Performance evaluation of a six-axis generalized force-reflecting teleoperator , 1991, IEEE Trans. Syst. Man Cybern..

[9]  M L Lin,et al.  A Method for Evaluating Head-Controlled Computer Input Devices Using Fitts' Law , 1990, Human factors.

[10]  Thomas C. Bryan,et al.  Evaluation of telerobotic systems using an instrumented task board , 1991 .

[11]  Thomas B. Sheridan,et al.  Human supervisory control of robot systems , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[12]  W Seamone,et al.  Early clinical evaluation of a robot arm/worktable system for spinal-cord-injured persons. , 1985, Journal of rehabilitation research and development.

[13]  H. Kwee,et al.  First experimentation of the Spartacus telethesis in a clinical environment , 1983, Paraplegia.

[14]  L. Leifer,et al.  Clinical evaluation of a desktop robotic assistant. , 1989, Journal of rehabilitation research and development.

[15]  P. Fitts The information capacity of the human motor system in controlling the amplitude of movement. , 1954, Journal of experimental psychology.

[16]  J. K. Salisbury,et al.  Kinesthetic coupling between operator and remote manipulator , 1980 .

[17]  Dale A. Lawrence,et al.  Performance trade-offs for hand controller design , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.