A property-integration approach to solvent screening and conceptual design of solvent-extraction systems for recycling used lubricating oils

The significant quantities of used and discharged lubricating oils pose a major environmental problem around the world. Recently, there has been a growing interest in the sustainable usage of lubricating oils by adopting recovery, recycle, and reuse strategies. In this study, a property-integration framework is used in the optimization of solvent selection for re-refining of used lubricating oils. Property-integration tools are employed for the systematic screening of solvents and solvent blends. The proposed approach identifies the main physical properties that influence the performance of solvent(s) while extracting additives and contaminants from used lubricating oils (i.e., solubility parameter (δ), viscosity (v), and vapor pressure (p)). To identify a feasibility region for an effective solvent or solvent blend for this process, we construct a ternary diagram utilizing the property-clustering technique. The results of the theoretical approach are validated through comparison between experimental data for single solvents and for solvent blends.

[1]  Mahmoud M. El-Halwagi,et al.  A property‐based optimization of direct recycle networks and wastewater treatment processes , 2009 .

[2]  S. Al-zahrani,et al.  A method of predicting effective solvent extraction parameters for recycling of used lubricating oils , 2002 .

[3]  J. Rincón,et al.  Regeneration of Used Lubricant Oil by Polar Solvent Extraction , 2005 .

[4]  Cheng-Liang Chen,et al.  A unified model of property integration for batch and continuous processes , 2009 .

[5]  Waste lubricating oil rerefining by extraction-flocculation. 2. A method to formulate efficient composite solvents , 1990 .

[6]  Denny K. S. Ng,et al.  Automated targeting for conventional and bilateral property-based resource conservation network , 2009 .

[7]  Mahmoud M. El-Halwagi,et al.  Global optimization of mass and property integration networks with in-plant property interceptors , 2009 .

[8]  Mario R. Eden,et al.  Combined property clustering and GC+ techniques for process and product design , 2010, Comput. Chem. Eng..

[9]  Mahmoud M. El-Halwagi,et al.  Simultaneous Process and Molecular Design through Property Clustering Techniques: A Visualization Tool , 2007 .

[10]  Mahmoud M. El-Halwagi,et al.  An integrated approach to the optimization of in-plant wastewater interception with mass and property constraints , 2011, Clean Technologies and Environmental Policy.

[11]  Waste lubricating oil rerefining by extraction-flocculation. 1. A scientific basis to design efficient solvents , 1988 .

[12]  Mahmoud M. El-Halwagi,et al.  Global optimization for the synthesis of property-based recycle and reuse networks including environmental constraints , 2010, Comput. Chem. Eng..

[13]  Mahmoud M. El-Halwagi,et al.  Algebraic Techniques for Property Integration via Componentless Design , 2004 .

[14]  E. G. Curphey.  ADDITIVES in Lubricating Oils , 1955 .

[15]  Mahmoud M. El-Halwagi,et al.  Simultaneous process and molecular design—A property based approach , 2007 .

[16]  Allan F. M. Barton,et al.  CRC Handbook of solubility parameters and other cohesion parameters , 1983 .

[17]  F. Khan,et al.  Effect of Extraction and Adsorption on Re-refining of Used Lubricating Oil , 2009 .

[18]  Mahmoud M. El-Halwagi,et al.  Component-less design of recovery and allocation systems: a functionality-based clustering approach , 2000 .

[19]  Mario R. Eden,et al.  A systematic visual approach to molecular design via property clusters and group contribution methods , 2008, Comput. Chem. Eng..

[20]  Mahmoud M. El-Halwagi,et al.  Property integration: Componentless design techniques and visualization tools , 2004 .

[21]  Mario R. Eden,et al.  Decomposition Techniques for Multiscale Structured Product Design: Molecular Synthesis , 2009 .