AI-based performance prediction for 3D-printed concrete considering anisotropy and steam curing condition

[1]  Jitong Zhao,et al.  Experimental research on consolidation creep characteristics and microstructure evolution of soft soil , 2023, Frontiers in Materials.

[2]  Chengzhao Wu,et al.  Analysis of the Infiltration and Water Storage Performance of Recycled Brick Mix Aggregates in Sponge City Construction , 2023, Water.

[3]  Shouwu Gao,et al.  The Application of Rubber Aggregate-Combined Permeable Concrete Mixture in Sponge City Construction , 2023, Coatings.

[4]  Hexin Zhang,et al.  Novel visual crack width measurement based on backbone double-scale features for improved detection automation , 2023, Engineering Structures.

[5]  Lei Li,et al.  Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios , 2023, Thin-Walled Structures.

[6]  Wenyao Liu,et al.  Mechanical performance and damage monitoring of CFRP thermoplastic laminates with an open hole repaired by 3D printed patches , 2023, Composite Structures.

[7]  Haiping Zhang,et al.  Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs , 2022, Metals.

[8]  G. Long,et al.  Influence of rapid curing methods on concrete microstructure and properties: A review , 2022, Case Studies in Construction Materials.

[9]  Haiping Zhang,et al.  Effect of Temperature on the Fatigue Life Assessment of Suspension Bridge Steel Deck Welds under Dynamic Vehicle Loading , 2022, Mathematical Problems in Engineering.

[10]  Zhenhao Zhang,et al.  A Wiener degradation process with drift‐based approach of determining target reliability index of concrete structures , 2022, Qual. Reliab. Eng. Int..

[11]  Fuheng Ma,et al.  Crack extension resistance of steam-cured concrete under different curing temperature conditions , 2022, Theoretical and Applied Fracture Mechanics.

[12]  Junbo Sun,et al.  Molecular interfacial properties and engineering performance of conductive fillers in cementitious composites , 2022, Journal of Materials Research and Technology.

[13]  B. Samali,et al.  Influence of seismic orientation on the statistical distribution of nonlinear seismic response of the stiffness-eccentric structure , 2022, Structures.

[14]  Jizhuo Huang,et al.  Mechanical Performance of 3D Printed Concrete in Steam Curing Conditions , 2022, Materials.

[15]  Junfei Zhang,et al.  Stability of roadway along hard roof goaf by stress relief technique in deep mines: a theoretical, numerical and field study , 2022, Geomechanics and Geophysics for Geo-Energy and Geo-Resources.

[16]  Liqun Chen,et al.  A nonlinear vibration isolator supported on a flexible plate: analysis and experiment , 2022, Nonlinear Dynamics.

[17]  Junbo Sun,et al.  A Multi-objective Optimisation Approach for Activity Excitation of Waste Glass Mortar , 2022, Journal of Materials Research and Technology.

[18]  Genbao Zhang,et al.  Multi-objective optimisation design for GFRP tendon reinforced cemented soil , 2022, Construction and Building Materials.

[19]  Dongxiao Wu,et al.  Prediction of thermo-mechanical properties of rubber-modified recycled aggregate concrete , 2022, Construction and Building Materials.

[20]  Junbo Sun,et al.  Mechanical Performance Prediction for Sustainable High-Strength Concrete Using Bio-Inspired Neural Network , 2022, Buildings.

[21]  Fei Liu,et al.  Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damage , 2021, Construction and Building Materials.

[22]  Zelin Zhang,et al.  Efficient image segmentation based on deep learning for mineral image classification , 2021, Advanced Powder Technology.

[23]  Shukui Liu,et al.  Mechanical, chemical and hydrothermal activation for waste glass reinforced cement , 2021 .

[24]  F. Aslani,et al.  Electromagnetic absorption of copper fiber oriented composite using 3D printing , 2021 .

[25]  Genbao Zhang,et al.  Multi-objective optimisation of a graphite-slag conductive composite applying a BAS-SVR based model , 2021, Journal of Building Engineering.

[26]  P. Feng,et al.  Debonding development in cracked steel plates strengthened by CFRP laminates under fatigue loading: Experimental and boundary element method analysis , 2021 .

[27]  Chunwei Zhang,et al.  The advancement of seismic isolation and energy dissipation mechanisms based on friction , 2021, Soil Dynamics and Earthquake Engineering.

[28]  F. Zhou,et al.  Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete , 2021 .

[29]  Genbao Zhang,et al.  The effect of graphite and slag on electrical and mechanical properties of electrically conductive cementitious composites , 2021 .

[30]  Wei Zhang,et al.  Experimental study on circular steel tube-confined reinforced UHPC columns under axial loading , 2021 .

[31]  Xingyang He,et al.  Effect of steam curing on compressive strength and microstructure of high volume ultrafine fly ash cement mortar , 2021 .

[32]  A. Goh,et al.  Estimation of diaphragm wall deflections for deep braced excavation in anisotropic clays using ensemble learning , 2021, Geoscience Frontiers.

[33]  A. du Plessis,et al.  An investigation into the porosity of extrusion-based 3D printed concrete , 2021 .

[34]  Wengang Zhang,et al.  Prediction of undrained shear strength using extreme gradient boosting and random forest based on Bayesian optimization , 2021 .

[35]  Wengang Zhang,et al.  Quantification of statistical uncertainties of rock strength parameters using Bayesian-based Markov Chain Monte Carlo method , 2020, IOP Conference Series: Earth and Environmental Science.

[36]  Baoju Liu,et al.  Effect of steam curing on surface permeability of concrete: Multiple transmission media , 2020 .

[37]  Baoju Liu,et al.  Effect of curing regime on long-term mechanical strength and transport properties of steam-cured concrete , 2020 .

[38]  Baoju Liu,et al.  Properties evolution of high-early-strength cement paste and interfacial transition zone during steam curing process , 2020 .

[39]  Jianxin Li,et al.  Machine-learning-assisted shear strength prediction of reinforced concrete beams with and without stirrups , 2020, Engineering with Computers.

[40]  John J. Myers,et al.  Effect of accelerated curing regimes on high volume Fly ash mixtures in precast manufacturing plants , 2020 .

[41]  Jiancheng Shi,et al.  Soil moisture experiment in the Luan River supporting new satellite mission opportunities , 2020 .

[42]  K. Zheng,et al.  Mechanical property, sorptivity and microstructure of steam-cured concrete incorporated with the combination of metakaolin-limestone , 2019 .

[43]  Erik Schlangen,et al.  The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing , 2019, Materials.

[44]  Y. Ju,et al.  Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber , 2019, Construction and Building Materials.

[45]  Y. Bai,et al.  Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone , 2018, Engineering Structures.

[46]  Domenico Asprone,et al.  3D printing of reinforced concrete elements: Technology and design approach , 2018 .

[47]  A. Sadrmomtazi,et al.  Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC) , 2018 .

[48]  D. Panesar,et al.  Hydration kinetics and compressive strength of steam-cured cement pastes and mortars containing limestone filler , 2016 .

[49]  Mustafa Ulaş,et al.  Using an Artificial Neural Network to Predict Mix Compositions of Steel Fiber-Reinforced Concrete , 2014, Arabian Journal for Science and Engineering.

[50]  B. Benammar,et al.  Influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes , 2013 .

[51]  Jui-Sheng Chou,et al.  Concrete compressive strength analysis using a combined classification and regression technique , 2012 .

[52]  G. Long,et al.  Influence of subsequent curing on water sorptivity and pore structure of steam-cured concrete , 2012 .

[53]  I. Richardson,et al.  Composition, morphology and nanostructure of C-S-H in white portland cement pastes hydrated at 55 °C , 2007 .

[54]  Mitsunori Kawamura,et al.  Evaluation of capillary pore size characteristics in high-strength concrete at early ages , 2005 .

[55]  Selçuk Türkel,et al.  THE EFFECT OF EXCESSIVE STEAM CURING ON PORTLAND COMPOSITE CEMENT CONCRETE , 2005 .

[56]  L. Turanli,et al.  Setting time: An important criterion to determine the length of the delay period before steam curing of concrete , 2003 .

[57]  Michael Gasser,et al.  Mechanism of Sulfate Expansion in Hydrated Portland Cement , 1988 .