Working height, block mass and one- vs. two-handed block handling: the contribution to low back and shoulder loading during masonry work

The goal of this study was to compare the effects of the task variables block mass, working height and one- vs. two-handed block handling on low back and shoulder loading during masonry work. In a mock-up of a masonry work site, nine masonry workers performed one- and two-handed block-lifting and block-placing tasks at varying heights (ranging from floor to shoulder level) with blocks of varying mass (ranging from 6 to 16 kg). Kinematics and ground reaction forces were measured and used in a 3-D linked segment model to calculate low back and shoulder loading. Increasing lifting height appeared to be the most effective way to reduce low back loading. However, working at shoulder level resulted in relatively high shoulder loading. Therefore, it was recommended to organise masonry work in such a way that blocks are handled with the hands at about iliac crest height as much as possible.

[1]  G S Faber,et al.  Effect of block weight on work demands and physical workload during masonry work , 2008, Ergonomics.

[2]  J. Kelsey,et al.  An epidemiologic study of lifting and twisting on the job and risk for acute prolapsed lumbar intervertebral disc , 1984, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[3]  Alwin Luttmann,et al.  Lumbar load during one-handed bricklaying , 1991 .

[4]  Kermit G. Davis,et al.  Assessment of the Relationship between Box Weight and Trunk Kinematics: Does a Reduction in Box Weight Necessarily Correspond to a Decrease in Spinal Loading? , 2000, Hum. Factors.

[5]  A. Silman,et al.  Occupational risk factors for shoulder pain: a systematic review , 2000, Occupational and environmental medicine.

[6]  C. E. Clauser,et al.  Anthropometric Relationships of Body and Body Segment Moments of Inertia , 1980 .

[7]  J H van Dieën,et al.  Weight and frequency effect on spinal loading in a bricklaying task. , 1996, Journal of biomechanics.

[8]  Steven A. Lavender,et al.  Can a New Behaviorally Oriented Training Process to Improve Lifting Technique Prevent Occupationally Related Back Injuries Due to Lifting? , 2007, Spine.

[9]  C. Wiktorin,et al.  The influence of work-related exposures on the prognosis of neck/shoulder pain , 2007, European Spine Journal.

[10]  D. Anton.  Occupational biomechanics , 1986 .

[11]  Alex Burdorf,et al.  Model for the work-relatedness of low-back pain. , 2003, Scandinavian journal of work, environment & health.

[12]  M. Adams,et al.  Physical Activity and the Strength of the Lumbar Spine , 1989, Spine.

[13]  D Coggon,et al.  Occupational activity and osteoarthritis of the knee. , 1994, Annals of the rheumatic diseases.

[14]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[15]  K P Granata,et al.  Relation between spinal load factors and the high-risk probability of occupational low-back disorder. , 1999, Ergonomics.

[16]  C. Monfort,et al.  Chronic neck and shoulder pain, age, and working conditions: longitudinal results from a large random sample in France , 2002, Occupational and environmental medicine.

[17]  M Hagberg,et al.  Method and performance: two elements of work technique. , 1998, Ergonomics.

[18]  J. Polder,et al.  Demographic and epidemiological determinants of healthcare costs in Netherlands: cost of illness study , 1998, BMJ.

[19]  I. Kingma,et al.  Effect of lifting height and load mass on low back loading , 2008, Ergonomics.

[20]  H M Toussaint,et al.  Efficiency and effectiveness of stoop and squat lifting at different frequencies. , 1991, Ergonomics.

[21]  E. Holmström,et al.  Dose-response associations between musculoskeletal disorders and physical and psychosocial factors among construction workers. , 2005, Scandinavian journal of work, environment & health.

[22]  H E Veeger,et al.  Predicting mechanical load of the glenohumeral joint, using net joint moments. , 2000, Clinical biomechanics.

[23]  E Viikari-Juntura,et al.  A prospective study of work related factors and physical exercise as predictors of shoulder pain , 2001, Occupational and environmental medicine.

[24]  Monique H. W. Frings-Dresen,et al.  Epidemiologic evidence on manual materials handling as a risk factor for back disorders:a systematic review , 1999 .

[25]  V. H. Hildebrandt,et al.  Back pain in the working population: prevalence rates in Dutch trades and professions. , 1995, Ergonomics.

[26]  D Coggon,et al.  Occupational physical activities and osteoarthritis of the knee. , 2000, Arthritis and rheumatism.

[27]  A. Grieco,et al.  Epidemiology of musculoskeletal disorders due to biomechanical overload. , 1998, Ergonomics.

[28]  O. Schipplein,et al.  The Influence of Initial Horizontal Weight Placement on the Loads at the Lumbar Spine While Lifting , 1995, Spine.

[29]  U. Moritz,et al.  Low back and neck/shoulder pain in construction workers: occupational workload and psychosocial risk factors. Part 1: Relationship to low back pain. , 1992, Spine.

[30]  A. Silman,et al.  Association of occupational physical demands and psychosocial working environment with disabling shoulder pain. , 2001, Annals of the rheumatic diseases.

[31]  H. Picavet,et al.  Musculoskeletal pain in the Netherlands: prevalences, consequences and risk groups, the DMC3-study , 2003, Pain.

[32]  L Punnett,et al.  Physical work and chronic shoulder disorder. Results of a prospective population-based study , 2007, Annals of the rheumatic diseases.

[33]  G. W. Bennett,et al.  Regression models for the prediction of dynamic L4/L5 compression forces during lifting , 1992 .

[34]  J S Thomsen,et al.  Age‐ and Gender‐Related Differences in Vertebral Bone Mass, Density, and Strength , 1999, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[35]  E. Holmström,et al.  Musculoskeletal disorders in relation to age and occupation in Swedish construction workers. , 2003, American journal of industrial medicine.

[36]  H. F. van der Molen,et al.  Naar een optimale massa voor kalkzandsteenblokken , 2007 .

[37]  P. Brinckmann,et al.  Fatigue fracture of human lumbar vertebrae. , 1988, Clinical biomechanics.

[38]  J H van Dieën,et al.  Stoop or squat: a review of biomechanical studies on lifting technique. , 1999, Clinical biomechanics.

[39]  J H van Dieën,et al.  The effects of ergonomic interventions on low back moments are attenuated by changes in lifting behaviour , 2007, Ergonomics.

[40]  G B Andersson,et al.  The effects of lifting speed on the peak external forward bending, lateral bending, and twisting spine moments. , 1999, Ergonomics.

[41]  W. E. Hoogendoorn,et al.  Flexion and Rotation of the Trunk and Lifting at Work Are Risk Factors for Low Back Pain: Results of a Prospective Cohort Study , 2000, Spine.

[42]  U Rehder,et al.  Cohort study of occupational risk factors of low back pain in construction workers , 2000, Occupational and environmental medicine.

[43]  Keith T Palmer,et al.  Work relatedness of chronic neck pain with physical findings--a systematic review. , 2007, Scandinavian journal of work, environment & health.

[44]  Chad J Morgan,et al.  Neutral upright sagittal spinal alignment from the occiput to the pelvis in asymptomatic adults: a review and resynthesis of the literature. , 2007, Journal of neurosurgery. Spine.

[45]  A. G. Fleischer,et al.  Physical load exposure at construction sites. , 2005, Scandinavian journal of work, environment & health.

[46]  I. Kingma,et al.  Can low back loading during lifting be reduced by placing one leg beside the object to be lifted? , 2006, Physical therapy.

[47]  Idsart Kingma,et al.  Lifting over an obstacle: effects of one-handed lifting and hand support on trunk kinematics and low back loading. , 2004, Journal of biomechanics.

[48]  F. V. D. van der Helm,et al.  Geometry parameters for musculoskeletal modelling of the shoulder system. , 1992, Journal of biomechanics.

[49]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[50]  Monique H W Frings-Dresen,et al.  Assessing the work-relatedness of nonspecific low-back pain. , 2005, Scandinavian journal of work, environment & health.

[51]  W S Marras,et al.  Spinal loading when lifting from industrial storage bins , 2002, Ergonomics.

[52]  P. Hinton,et al.  Lean Body Mass and Weight-Bearing Activity in the Prediction of Bone Mineral Density in Physically Active Men , 2009, Journal of strength and conditioning research.

[53]  U. Moritz,et al.  Low Back and Neck/Shoulder Pain in Construction Workers: Occupational Workload and Psychosocial Risk Factors , 1992, Spine.

[54]  A. Silman,et al.  Mechanical and psychosocial factors predict new onset shoulder pain: a prospective cohort study of newly employed workers , 2003, Occupational and environmental medicine.

[55]  W S Marras,et al.  Prospective validation of a low-back disorder risk model and assessment of ergonomic interventions associated with manual materials handling tasks , 2000, Ergonomics.

[56]  Idsart Kingma,et al.  Foot positioning instruction, initial vertical load position and lifting technique: effects on low back loading , 2004, Ergonomics.

[57]  P. Bongers,et al.  A new bricklayers' method for use in the construction industry. , 2005, Scandinavian journal of work, environment & health.

[58]  I. Kingma,et al.  Validation of a full body 3-D dynamic linked segment model , 1996 .

[59]  William S. Marras,et al.  The effect of complex dynamic lifting and lowering characteristics on trunk muscles recruitment , 1997, Journal of Occupational Rehabilitation.

[60]  W. E. Hoogendoorn,et al.  Physical load during work and leisure time as risk factors for back pain. , 1999, Scandinavian journal of work, environment & health.

[61]  S L Zeger,et al.  Regression analysis for correlated data. , 1993, Annual review of public health.

[62]  T. Andriacchi,et al.  Influence of Dynamic Factors and External Loads on the Moment at the Lumbar Spine in Lifting , 1988, Spine.

[63]  W S Marras,et al.  Spine loading during asymmetric lifting using one versus two hands. , 1998, Ergonomics.

[64]  J H van Dieën,et al.  Effects of antagonistic co-contraction on differences between electromyography based and optimization based estimates of spinal forces , 2005, Ergonomics.

[65]  Judith K Sluiter,et al.  Efficacy of adjusting working height and mechanizing of transport on physical work demands and local discomfort in construction work , 2004, Ergonomics.