Inkjet-printed microshell encapsulation: A new zero-level packaging technology

A low-thermal-budget (CMOS-compatible) process for microshell encapsulation of MEMS devices is proposed. Inkjet-printing of silver (Ag) nanoparticle ink is demonstrated to form porous microshells through which sacrificial oxide (SiO2) can be selectively removed to release MEMS structures. A second inkjet printing process using finer gold (Au) nanoparticle ink is demonstrated to effectively seal the microshells. The mechanical strength of a printed microshell (~3 μm thick) is sufficient for encapsulating regions greater than 1 mm in length.

[1]  D. Gamota,et al.  Lines of dense nanoparticle colloidal suspensions evaporating on a flat surface: formation of non-uniform dried deposits. , 2006, Journal of colloid and interface science.

[2]  R. Street,et al.  Thermal cure effects on electrical performance of nanoparticle silver inks , 2007 .

[3]  Tsu-Jae King,et al.  Thermal budget limits of quarter-micrometer foundry CMOS for post-processing MEMS devices , 2005, IEEE Transactions on Electron Devices.

[4]  P. Buffat,et al.  Size effect on the melting temperature of gold particles , 1976 .

[5]  R. Howe,et al.  Vacuum encapsulation of resonant devices using permeable polysilicon , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[6]  R. Street,et al.  Mechanical characterization of solution-derived nanoparticle silver ink thin films , 2007 .

[7]  Chang-Jin Kim,et al.  On-Wafer Monolithic Encapsulation by Surface Micromachining With Porous Polysilicon Shell , 2007, Journal of Microelectromechanical Systems.