Assessment of working conditions in two different semiconductor manufacturing lines: Effective ergonomics interventions

This article examines two manufacturing lines producing semiconductors using different technology concepts, namely Conventional Line (CL) and Lean Production Line (LPL). Both lines manufacturing the same products were compared using various factors, including working conditions, task risks and dangers of the job, and physical body stress. Ergonomic approaches were adopted in the investigation of the two lines. Survey questionnaires were administered to 30p of the workers, and multiple statistical tests were used to determine crucial predictors and to investigate the interactions between the factors. This research has shown that improved ergonomics factors will lead to better working conditions and thus increased job satisfaction. The observed ergonomic differences of these two production lines are compared, and appropriate managerial remedial action is recommended. The interventions to both the lines should reduce accident rates, minimize waste of resources, improve work effectiveness, and provide a better working environment that enhances employees' morale and maximizes productivity and profits. © 2010 Wiley Periodicals, Inc.

[1]  B Nordgren,et al.  Measurements of movements during highly repetitive industrial work. , 1996, Applied ergonomics.

[2]  Pedro Arezes,et al.  Risk perception and safety behaviour: A study in an occupational environment , 2008 .

[3]  Ragnar Rylander,et al.  Loudness, Annoyance and dBA in Evaluating Low Frequency Sounds , 1990 .

[4]  B Nilsson,et al.  Musculoskeletal disorders among visual display terminal workers: individual, ergonomic, and work organizational factors. , 1995, Ergonomics.

[5]  W. Tempest,et al.  Are our noise laws adequate , 1973 .

[6]  Alain Wisner,et al.  Variety of physical characteristics in industrially developing countries— ergonomic consequences , 1989 .

[7]  H. G. Leventhall,et al.  Low frequency noise and annoyance. , 2004, Noise & health.

[8]  Stanley Richardson,et al.  A study of computer-related upper limb discomfort and computer vision syndrome. , 2007, Journal of human ergology.

[9]  P Knauth,et al.  Designing better shift systems. , 1996, Applied ergonomics.

[10]  P. McGrath,et al.  Back pain and peripheral joint pain in an industrial setting. , 1996, Archives of physical medicine and rehabilitation.

[11]  Paul H.P. Yeow,et al.  Productivity and quality improvements, revenue increment, and rejection cost reduction in the manual component insertion lines through the application of ergonomics , 2006 .

[12]  Paul H.P. Yeow,et al.  Ergonomics Improvements of the Visual Inspection Process in a Printed Circuit Assembly Factory , 2004, International journal of occupational safety and ergonomics : JOSE.

[13]  M. Björkman,et al.  Annoyance due to low frequency noise and the use of the dB(A) scale , 1988 .

[14]  M Hagberg,et al.  Occupational musculoskeletal stress and disorders of the neck and shoulder: a review of possible pathophysiology , 1984, International archives of occupational and environmental health.

[15]  Paul H.P. Yeow,et al.  Quality, productivity, occupational health and safety and cost effectiveness of ergonomic improvements in the test workstations of an electronic factory , 2003 .

[16]  Waldemar Karwowski,et al.  Human performance in lean production environment: Critical assessment and research framework , 2003 .

[17]  Alessandro Cocchi,et al.  Experimental Characterisation of the Low Frequency Noise Annoyance Arising from Industrial Plants , 1992 .

[18]  K Kogi,et al.  Arm and shoulder muscle load in various keyboard operating jobs of women. , 1982, Journal of human ergology.

[19]  V. H. Hildebrandt,et al.  Psychosocial factors at work and musculoskeletal disease , 1993 .

[20]  G Mohiuddin,et al.  Work-related problems in metal handling tasks in Bangladesh: obstacles to the development of safety and health measures. , 1999, Ergonomics.

[21]  Karl Theodor Kalveram,et al.  How information about the source influences noise annoyance , 1999 .

[22]  P. A. Scott,et al.  The effect of a work-conditioning programme on manual labourers in South African industry , 1999 .

[23]  R. Fontaine,et al.  Occupational stress among managers: a Malaysian survey , 2003 .

[24]  F Akbar-Khanzadeh,et al.  Comfort of personal protective equipment. , 1995, Applied ergonomics.

[25]  T. Bolton,et al.  Adrenoreceptors in the cardiovascular system of the domestic fowl. , 1969, European journal of pharmacology.

[26]  Rabindra Nath Sen,et al.  Cost effectiveness of ergonomic redesign of electronic motherboard. , 2003, Applied ergonomics.

[27]  Jacques Chatillon.  Influence of source directivity on noise levels in industrial halls: Simulation and experiments , 2007 .

[28]  E Grandjean,et al.  Postural and visual loads at VDT workplaces. I. Constrained postures. , 1981, Ergonomics.

[29]  Alain Wisner,et al.  Ergonomics in industrially developing countries , 1985 .

[30]  Krishna Gopal Rampal,et al.  Ergonomic risk factors of work processes in the semiconductor industry in Peninsular Malaysia. , 2004, Industrial health.

[31]  R. Guski.  Personal and social variables as co-determinants of noise annoyance. , 1999, Noise & health.

[32]  D. O’Neill.  Ergonomics in industrially developing countries: does its application differ from that in industrially advanced countries? , 2000, Applied ergonomics.

[33]  Houshang Shahnavaz.  Ergonomics: An emerging concept in industrially developing countries , 1989 .

[34]  Ottar Vasseljen,et al.  Can stress-related shoulder and neck pain develop independently of muscle activity? , 1996, Pain.

[35]  C. Cooper.  Executive stress: A ten‐country comparison , 1984 .

[36]  Robert S. Bridger,et al.  Musculoskeletal pain and workplace ergonomic stressors in manufacturing industry in South Africa , 1993 .

[37]  B. Knave,et al.  Eye discomfort and work with visual display terminals. , 1994 .