Challenging the concept of electrochemical discharge using salt solutions for lithium-ion batteries recycling.

The use of lithium-ion batteries (LIB) has grown significantly in recent years, making them a promising source of secondary raw materials due to their rich composition of valuable materials such as Co, Ni and Al. However, the high voltage and reactive components of LIBs pose safety hazards during crushing stages in recycling processes, and during storage and transportation. Electrochemical discharge by immersion of spent batteries in salt solutions has been generally accepted as a robust and straightforward discharging step to address these potential hazards. Nonetheless, there is no clear evidence in the literature to support the use of electrochemical discharge in real systems, neither are there clear indications of the real-world limitations of this practice. To that aim, this work presents a series of experiments systematically conducted to study the behavior of LIBs during electrochemical discharge in salt solutions. In the first part of this study, a LIB sample was discharged ex-situ using Pt wires connected to the battery poles and submerged into the electrolyte solution on the opposite end. The evolution of voltage in the battery was measured for solutions of NaCl, NaSO4, FeSO4, and ZnSO4. The results indicate that, among the electrolytes used in the present study, NaCl solution is the most effective for LIBs discharge. The discharge of LIB using sulfate salts is however only possible with the aid of stirring, as deposition of solid precipitated on the electrodes hinder the electrochemical discharge. Furthermore, it was found that the addition of particulates of Fe or Zn as sacrificial metal further enhances the discharging rate, likely due to an increased contact area with the electrolyte solution. While these findings support the idea of using electrochemical discharge as a pre-treatment of LIBs, severe corrosion of the battery poles was observed upon direct immersion of batteries into electrolyte solutions. Prevention of such corrosion requires further research efforts, perhaps focused on a new design-for-recycling approach of LIBs.

[1]  Zhiwen Zeng,et al.  Process for the recovery of cobalt oxalate from spent lithium-ion batteries , 2011 .

[2]  Vi Kie Soo,et al.  Opportunities to Improve Recycling of Automotive Lithium Ion Batteries , 2015 .

[3]  Diego Lisbona,et al.  A review of hazards associated with primary lithium and lithium-ion batteries , 2011 .

[4]  J. Światowska,et al.  Lithium Process Chemistry : Resources, Extraction, Batteries, and Recycling , 2015 .

[5]  Junmin Nan,et al.  Recovery of metal values from a mixture of spent lithium-ion batteries and nickel-metal hydride batteries , 2006 .

[6]  Zhenming Xu,et al.  Generation and detection of metal ions and volatile organic compounds (VOCs) emissions from the pretreatment processes for recycling spent lithium-ion batteries. , 2016, Waste management.

[7]  D. Ra,et al.  Used lithium ion rechargeable battery recycling using Etoile-Rebatt technology , 2006 .

[8]  Anders Hammer Strømman,et al.  Life cycle environmental assessment of lithium-ion and nickel metal hydride batteries for plug-in hybrid and battery electric vehicles. , 2011, Environmental science & technology.

[9]  Yvonne Freeh,et al.  Handbook Of Batteries , 2016 .

[10]  Yulong Ding,et al.  A concise model for evaluating water electrolysis , 2011 .

[11]  Melecita M. Archuleta,et al.  Toxicity of materials used in the manufacture of lithium batteries , 1995 .

[12]  H. Thomas,et al.  A review of processes and technologies for the recycling of lithium-ion secondary batteries , 2008 .

[13]  Yurij M. Volfkovich,et al.  Lithium Ion Batteries , 2015 .

[14]  Kang-In Rhee,et al.  Preparation of LiCoO2 from spent lithium-ion batteries , 2002 .

[15]  Feng Wu,et al.  Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant. , 2010, Journal of hazardous materials.

[16]  Changsong Dai,et al.  The Re-Synthesis of LiCoO2 from Spent Lithium Ion Batteries Separated by Vacuum-Assisted Heat-Treating Method , 2013, International Journal of Electrochemical Science.

[17]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[18]  B. Friedrich,et al.  Development of a recycling process for Li-ion batteries , 2012 .

[19]  J. Olsen,et al.  The European Commission , 2020, The European Union.

[20]  Hongbin Cao,et al.  An overview on the processes and technologies for recycling cathodic active materials from spent lithium-ion batteries , 2013 .

[21]  Michael J Lain.  Recycling of lithium ion cells and batteries , 2001 .

[22]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[23]  Yaqun He,et al.  Characteristics of wet and dry crushing methods in the recycling process of spent lithium-ion batteries , 2013 .

[24]  Dawei Song,et al.  LiCoO2: recycling from spent batteries and regeneration with solid state synthesis , 2015 .

[25]  Denise Crocce Romano Espinosa,et al.  An overview on the current processes for the recycling of batteries , 2004 .

[26]  Hongrui Ma,et al.  Recovery of valuable metals from waste cathode materials of spent lithium-ion batteries using mild phosphoric acid. , 2017, Journal of hazardous materials.

[27]  S. Grigoriev,et al.  PEM water electrolyzers: From electrocatalysis to stack development , 2010 .

[28]  Arno Kwade,et al.  Effect of impurities caused by a recycling process on the electrochemical performance of Li[Ni0.33Co0.33Mn0.33]O2 , 2014 .