Friction coefficients in a longitudinal direction between the finger pad and selected materials for different normal forces and curvatures

This study investigated the effect of object curvature, normal force and material on skin friction coefficient. Twelve subjects slid their middle fingertip pad against a test object with small (11 mm), medium (18, 21 mm) or large (flat object) radii of curvature, while maintaining a normal force of 1, 10 or 20 N. Tested materials were aluminium and four rubber hoses. The average friction coefficient was 0.6 for aluminium and 0.9 for the rubber hoses. As normal force increased from 1 to 20 N, the average friction coefficient decreased 46%. Friction coefficient did not vary significantly with object curvature. The citation of friction coefficient data requires careful attention to normal force levels with which they are measured, but not so much to object curvature between 11 mm and infinity. This study provides skin friction coefficient data that are needed for design of objects that are manipulated with the hands. The investigation of the effect of object curvature on skin friction coefficient has important implications to ergonomics practices as many objects handled in everyday activities have curved surfaces.

[1]  Hui Dong,et al.  Effect of dental tool surface texture and material on static friction with a wet gloved fingertip. , 2007, Journal of biomechanics.

[2]  Koudine,et al.  Frictional properties of skin: proposal of a new approach , 2000, International journal of cosmetic science.

[3]  M. Shibata,et al.  Evaluating dressing materials for the prevention of shear force in the treatment of pressure ulcers. , 2005, Journal of wound care.

[4]  S N Imrhan,et al.  Male torque strength in simulated oil rig tasks: the effects of grease-smeared gloves and handle length, diameter and orientation. , 1999, Applied ergonomics.

[5]  Melissa J Perry,et al.  Laceration injuries among workers at meat packing plants. , 2005, American Journal of Industrial Medicine.

[6]  O Bobjer,et al.  Friction between hand and handle. Effects of oil and lard on textured and non-textured surfaces; perception of discomfort. , 1993, Applied ergonomics.

[7]  Thomas J. Armstrong,et al.  The Effect of Handle Friction and Inward or Outward Torque on Maximum Axial Push Force , 2008, Hum. Factors.

[8]  D. Chaffin,et al.  The effect of torque direction and cylindrical handle diameter on the coupling between the hand and a cylindrical handle. , 2007, Journal of biomechanics.

[9]  Peter Blau,et al.  Friction science and technology , 1995 .

[10]  D. O'Meara,et al.  Functional handgrip test to determine the coefficient of static friction at the hand/handle interface , 2002, Ergonomics.

[11]  H Kinoshita,et al.  Grip posture and forces during holding cylindrical objects with circular grips. , 1996, Ergonomics.

[12]  Shun-hwa Wei,et al.  Wrist kinematic characterization of wheelchair propulsion in various seating positions: implication to wrist pain. , 2003, Clinical biomechanics.

[13]  S Kutluhan,et al.  Carpal tunnel syndrome in carpet workers , 2001, International archives of occupational and environmental health.

[14]  Stephan Konz,et al.  Jar Lids: Effect of Diameter, Gripping Materials and Knurling , 1986 .

[15]  Howard I Maibach,et al.  Friction coefficient of skin in real‐time , 2003, Skin research and technology : official journal of International Society for Bioengineering and the Skin (ISBS) [and] International Society for Digital Imaging of Skin (ISDIS) [and] International Society for Skin Imaging.

[16]  V M Zatsiorsky,et al.  Contribution of the extrinsic and intrinsic hand muscles to the moments in finger joints. , 2000, Clinical biomechanics.

[17]  R G Dong,et al.  Analysis of the contact interactions between fingertips and objects with different surface curvatures , 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[18]  Thomas J. Armstrong,et al.  Inward Torque and High-Friction Handles Can Reduce Required Muscle Efforts for Torque Generation , 2008, Hum. Factors.

[19]  R. Bernstein,et al.  Band saw injury in a butcher. , 2007, Occupational medicine.

[20]  T J Armstrong,et al.  An Ellipsoidal Representation of Human Hand Anthropometry , 1991, Human factors.

[21]  M. Coye,et al.  NATIONAL RESEARCH COUNCIL AND INSTITUTE OF MEDICINE , 1998 .

[22]  T J Armstrong,et al.  An investigation of human palmar skin friction and the effects of materials, pinch force and moisture. , 1988, Ergonomics.

[23]  S-P Wu,et al.  Ergonomic study of a vertical rope-pulling task from a scaffolding , 2008, Ergonomics.

[24]  Received March,et al.  In vivo skin friction measurements , 1977 .

[25]  W Mark Richter,et al.  Reduced finger and wrist flexor activity during propulsion with a new flexible handrim. , 2006, Archives of physical medicine and rehabilitation.

[26]  S. Comaish,et al.  THE SKIN AND FRICTION: DEVIATIONS FROM AMONTON'S LAWS, AND THE EFFECTS OF HYDRATION AND LUBRICATION , 1971, The British journal of dermatology.

[27]  Yi Li,et al.  Effect of sock on biomechanical responses of foot during walking. , 2006, Clinical biomechanics.

[28]  Fong-Chin Su,et al.  Kinetic analysis of the thumb in jar-opening activity among female adults , 2008, Ergonomics.

[29]  C Fransson-Hall,et al.  Acceptability of Intermittent Handgrip Contractions Based on Physiological Response , 1994, Human factors.

[30]  A. Polliack,et al.  A New Technology for Reducing Shear and Friction Forces on the Skin: Implications for Blister Care in the Wilderness Setting , 2006, Wilderness & environmental medicine.

[31]  Thomas J. Armstrong,et al.  A comparison of two methods of measuring static coefficient of friction at low normal forces: a pilot study , 2009, Ergonomics.

[32]  Ning Pan,et al.  Skin friction blistering: computer model , 2007, Skin research and technology : official journal of International Society for Bioengineering and the Skin (ISBS) [and] International Society for Digital Imaging of Skin (ISDIS) [and] International Society for Skin Imaging.

[33]  T J Armstrong,et al.  Effect of friction and load on pinch force in a hand transfer task. , 1995, Ergonomics.

[34]  Å. Kilbom,et al.  Physiological response in the forearm during and after isometric intermittent handgrip , 1991, European Journal of Applied Physiology and Occupational Physiology.

[35]  W Rohmert,et al.  Problems in determining rest allowances Part 1: use of modern methods to evaluate stress and strain in static muscular work. , 1973, Applied ergonomics.

[36]  S. Y. Kao,et al.  Carpal tunnel syndrome as an occupational disease. , 2003, The Journal of the American Board of Family Practice.