Networked Control System Time-Delay Compensation Based on Time-Delay Prediction and Improved Implicit GPC

The random time delay in a networked control system can usually deteriorate the control performance and stability of the networked control system. In order to solve this problem, this paper puts forward a networked control system random time-delay compensation method based on time-delay prediction and improved implicit generalized predictive control (GPC). The least squares support vector machine is used to predict the future time delay of network. The parameters of the least squares support vector machine time-delay prediction model are difficult to determine, and the genetic algorithm is used for least squares support vector machine optimal prediction parameter optimization. Then, an improved implicit generalized predictive control method is adopted to compensate for the time delay. The simulation results show that the method in this paper has high prediction accuracy and a good compensation effect for the random time delay of the networked control system, has a small amount of on-line calculation and that the output response and control stability of the system are improved.

[1]  Quang N. Tran,et al.  Generalized predictive control tuning by controller matching , 2014, 2014 American Control Conference.

[2]  Thomas E Marlin,et al.  Process Control , 1995 .

[3]  Xianwen Gao,et al.  A Hybrid Time-delay Prediction Method for Networked Control System , 2014, Int. J. Autom. Comput..

[4]  Chang-Wook Han.  Fuzzy Neural Network-based Time Delay Prediction for Networked Control Systems , 2014 .

[5]  Guo-Ping Liu,et al.  Predictive Output Feedback Control for Networked Control Systems , 2014, IEEE Transactions on Industrial Electronics.

[6]  Wenwu Yu,et al.  On pinning synchronization of complex dynamical networks , 2009, Autom..

[7]  Guanrong Chen,et al.  A time-varying complex dynamical network model and its controlled synchronization criteria , 2004, IEEE Trans. Autom. Control..

[8]  Hongli Qi,et al.  Parameters optimization and nonlinearity analysis of grating eddy current displacement sensor using neural network and genetic algorithm , 2009 .

[9]  Sirkka-Liisa Jämsä-Jounela,et al.  Networked control with delay measurement and estimation , 2009 .

[10]  Yuanqing Xia,et al.  Networked Predictive Control of Systems With Random Network Delays in Both Forward and Feedback Channels , 2007, IEEE Transactions on Industrial Electronics.

[11]  Tian Zhong-d.  Networked control system time-delay compensation algorithm based on predictive control , 2013 .

[12]  Jin-Shui Pan,et al.  Integrated application of uniform design and least-squares support vector machines to transfection optimization , 2009, BMC biotechnology.

[13]  Weihua Gui,et al.  State-Space Model Based Generalized Predictive Control for Networked Control Systems , 2008 .

[14]  Hongliang Ren,et al.  Research on Adaptive Neural Network Control System Based on Nonlinear U-Model with Time-Varying Delay , 2014 .

[15]  Zhou Zi-ying.  A joint optimization algorithm and its application in chaotic time series prediction , 2012 .

[16]  Guo-Ping Liu,et al.  Networked Predictive Control of Uncertain Systems With Multiple Feedback Channels , 2013, IEEE Transactions on Industrial Electronics.

[17]  Junan Lu,et al.  Pinning adaptive synchronization of a general complex dynamical network , 2008, Autom..

[18]  Jason Jianjun Gu,et al.  Robust fault detection filter for non-linear state-delay networked control system , 2012, Int. J. Autom. Control..

[19]  Ching Y. Suen,et al.  Automatic model selection for the optimization of SVM kernels , 2005, Pattern Recognit..

[20]  Ji Huang,et al.  Robust Tracking Control of Networked Control Systems: Application to a Networked DC Motor , 2013, IEEE Transactions on Industrial Electronics.

[21]  Sun Zheng-yang.  Improved GPC network-control algorithm based on AR model time-delay prediction , 2012 .

[22]  Wenwu Yu,et al.  Synchronization via Pinning Control on General Complex Networks , 2013, SIAM J. Control. Optim..