Bipolar Integrated Circuits in 4H-SiC

Due to its wide band gap, 4H-SiC is potentially capable of sustained operation at temperatures well above 600 °C, but current devices are limited to lower temperatures by the stability of the metallization and passivation layers. SiC bipolar transistors are capable of operation at temperatures above 300 °C, as they do not have an oxide layer under high electric field and hence do not suffer from oxide reliability issues. In this paper, we describe bipolar digital integrated circuits on semi-insulating 4H-SiC that operate over a wide range of supply voltage and temperature, demonstrating the potential of SiC for high-temperature small-scale integrated-circuit applications.

[1]  A. Agarwal,et al.  Influence of Basal Plane Dislocation Induced Stacking Faults on the Current Gain in SiC BJTs , 2006 .

[2]  James A. Cooper,et al.  Measurement of high-field electron transport in silicon carbide , 2000 .

[3]  J. Suehle,et al.  Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments , 2010, IEEE Transactions on Device and Materials Reliability.

[4]  H. Ryssel,et al.  NMOS Logic Circuits Using 4H-SiC MOSFETs for High Temperature Applications , 2010 .

[5]  C. Fazi,et al.  Positive temperature coefficient of breakdown voltage in 4H-SiC pn junction rectifiers , 1997, IEEE Electron Device Letters.

[6]  Tat-Sing Paul Chow,et al.  An implanted-emitter 4H-SiC bipolar transistor with high current gain , 2000, 58th DRC. Device Research Conference. Conference Digest (Cat. No.00TH8526).

[7]  J. Palmour,et al.  Silicon carbide for power devices , 1997, Proceedings of 9th International Symposium on Power Semiconductor Devices and IC's.

[8]  R. Singh,et al.  1800 V NPN bipolar junction transistors in 4H-SiC , 2001, IEEE Electron Device Letters.

[9]  B. Malm,et al.  Experimental Study of Degradation in 4H-SiC BJTs by Means of Electrical Characterization and Electroluminescence , 2010 .

[10]  E. Pettenpaul,et al.  Saturated electron drift velocity in 6H silicon carbide , 1977 .

[11]  J. Liou,et al.  Theoretical prediction of the performance of Si and SiC bipolar transistors operating at high temperatures , 1993 .

[12]  J. Cooper,et al.  High current gain 4H-SiC npn bipolar junction transistors , 2003, IEEE Electron Device Letters.

[13]  Carl-Mikael Zetterling,et al.  Surface passivation oxide effects on the current gain of 4H-SiC bipolar junction transistors , 2008 .

[14]  Shakti Singh,et al.  High-performance TTL bipolar integrated circuits in 4H-SiC , 2010 .

[15]  A. O'Neill,et al.  Recent progress and current issues in SiC semiconductor devices for power applications , 2001 .

[16]  S. Singh,et al.  Demonstration and Characterization of Bipolar Monolithic Integrated Circuits in 4H-SiC , 2008, IEEE Transactions on Electron Devices.

[17]  J. Cooper,et al.  Time-dependent-dielectric-breakdown measurements of thermal oxides on n-type 6H-SiC , 1999 .

[18]  M. Ostling,et al.  Geometrical effects in high current gain 1100-V 4H-SiC BJTs , 2005, IEEE Electron Device Letters.

[19]  Qingchun Zhang,et al.  Analysis of Operational Degradation of SIC BJT Characteristics , 2007, Proceedings of the 19th International Symposium on Power Semiconductor Devices and IC's.

[20]  Arun Gowda,et al.  Performance and Reliability of SiC MOSFETs for High-Current Power Modules , 2010 .

[21]  James S. Harris,et al.  Diode ideality factor for surface recombination current in AlGaAs/GaAs heterojunction bipolar transistors , 1992 .

[22]  A. Agarwal,et al.  Emitter Size Effect in 4H-SiC BJT , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[23]  Leonard C. Feldman,et al.  Effect of process variations and ambient temperature on electron mobility at the SiO/sub 2//4H-SiC interface , 2003 .

[24]  Philip G. Neudeck,et al.  Progress towards high temperature , high power SiC devices , 1998 .