A biomimetic honeycomb‐like scaffold prepared by flow‐focusing technology for cartilage regeneration

A tissue engineering chondrocytes/scaffold construct provides a promise to cartilage regeneration. The architecture of a scaffold such as interconnections, porosities, and pore sizes influences the fates of seeding cells including gene expression, survival, migration, proliferation, and differentiation thus may determine the success of this approach. Scaffolds of highly ordered and uniform structures are desirable to control cellular behaviors. In this study, a newly designed microfluidic device based on flow‐focusing geometry was developed to fabricate gelatin scaffolds of ordered pores. In comparison with random foam scaffolds made by the conventional freeze‐dried method, honeycomb‐like scaffolds exhibit higher swelling ratio, porosity, and comparable compressive strength. In addition, chondrocytes grown in the honeycomb‐like scaffolds had good cell viability, survival rate, glycosaminoglycans production, and a better proliferation than ones in freeze‐dried scaffolds. Real‐time PCR analysis showed that the mRNA expressions of aggrecan and collagen type II were up‐regulated when chondrocytes cultured in honeycomb‐like scaffolds rather than cells cultured as monolayer fashion. Oppositely, chondrocytes expressed collagen type II as monolayer culture when seeded in freeze‐dried scaffolds. Histologic examinations revealed that cells produced proteoglycan and distributed uniformly in honeycomb‐like scaffolds. Immunostaining showed protein expression of S‐100 and collagen type II but negative for collagen type I and X, which represents the chondrocytes maintained normal phenotype. In conclusion, a highly ordered and honeycomb‐like scaffold shows superior performance in cartilage tissue engineering. Biotechnol. Bioeng. 2014;111: 2338–2348. © 2014 Wiley Periodicals, Inc.

[1]  Ta-Jen Huang,et al.  Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering. , 2009, Acta biomaterialia.

[2]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[3]  P. Ma,et al.  Biodegradable polymer scaffolds with well-defined interconnected spherical pore network. , 2001, Tissue engineering.

[4]  P. Gatenholm,et al.  Influence of pore size on the redifferentiation potential of human articular chondrocytes in poly(urethane urea) scaffolds , 2011, Journal of tissue engineering and regenerative medicine.

[5]  Jackie Y Ying,et al.  Three-dimensional microstructured tissue scaffolds fabricated by two-photon laser scanning photolithography. , 2010, Biomaterials.

[6]  A. U. Daniels,et al.  Effects of scaffold composition and architecture on human nasal chondrocyte redifferentiation and cartilaginous matrix deposition. , 2005, Biomaterials.

[7]  Keng-hui Lin,et al.  Fabricating scaffolds by microfluidics. , 2009, Biomicrofluidics.

[8]  Yen-Liang Liu,et al.  Cartilage regeneration in SCID mice using a highly organized three-dimensional alginate scaffold. , 2012, Biomaterials.

[9]  A. Grodzinsky,et al.  The effects of cross-linking of collagen-glycosaminoglycan scaffolds on compressive stiffness, chondrocyte-mediated contraction, proliferation and biosynthesis. , 2001, Biomaterials.

[10]  Yilin Cao,et al.  Comparative study of the use of poly(glycolic acid), calcium alginate and pluronics in the engineering of autologous porcine cartilage. , 1998, Journal of biomaterials science. Polymer edition.

[11]  Kai-Chiang Yang,et al.  Glycosaminoglycan/chitosan hydrogel for matrix-associated autologous chondrocyte implantation: An in vitro study , 2014 .

[12]  Christopher S. Chen,et al.  Bone morphogenetic protein-2-induced signaling and osteogenesis is regulated by cell shape, RhoA/ROCK, and cytoskeletal tension. , 2012, Stem cells and development.

[13]  Moritoshi Itoman,et al.  Influence of three-dimensional culture in a type II collagen sponge on primary cultured and dedifferentiated chondrocytes , 2005, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[14]  D. Shoback,et al.  Extracellular Ca2+-Sensing Receptors Modulate Matrix Production and Mineralization in Chondrogenic RCJ3.1C5.18 Cells. , 2002, Endocrinology.

[15]  N. Kawazoe,et al.  Cartilage tissue engineering using funnel-like collagen sponges prepared with embossing ice particulate templates. , 2010, Biomaterials.

[16]  Shin-Ichiro Nishimura,et al.  Effect of pore size on in vitro cartilage formation using chitosan-based hyaluronic acid hybrid polymer fibers. , 2007, Journal of biomedical materials research. Part A.

[17]  Guoping Chen,et al.  The influence of structural design of PLGA/collagen hybrid scaffolds in cartilage tissue engineering. , 2010, Biomaterials.

[18]  C A van Blitterswijk,et al.  3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties. , 2006, Biomaterials.

[19]  X Wang,et al.  Preparation of aligned porous gelatin scaffolds by unidirectional freeze-drying method. , 2010, Acta biomaterialia.

[20]  G. Vásárhelyi,et al.  Autologous osteochondral grafting--technique and long-term results. , 2008, Injury.

[21]  Kai-Chiang Yang,et al.  The prediction of drug metabolism using scaffold-mediated enhancement of the induced cytochrome P450 activities in fibroblasts by hepatic transcriptional regulators. , 2012, Biomaterials.

[22]  Ali Khademhosseini,et al.  Controlling the porosity and microarchitecture of hydrogels for tissue engineering. , 2010, Tissue engineering. Part B, Reviews.

[23]  Hai-bin Wang,et al.  The reconstruction of lung alveolus-like structure in collagen-matrigel/microcapsules scaffolds in vitro , 2011, Journal of cellular and molecular medicine.

[24]  F. Mallein-Gerin,et al.  Comparative phenotypic analysis of articular chondrocytes cultured within type I or type II collagen scaffolds. , 2009, Tissue engineering. Part A.

[25]  D. Shoback,et al.  Extracellular Ca(2+)-sensing receptors modulate matrix production and mineralization in chondrogenic RCJ3.1C5.18 cells. , 2002, Endocrinology.

[26]  Andrew I. Cooper,et al.  Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles , 2005, Nature materials.

[27]  Yu-Chen Hu,et al.  Co‐conjugating chondroitin‐6‐sulfate/dermatan sulfate to chitosan scaffold alters chondrocyte gene expression and signaling profiles , 2008, Biotechnology and bioengineering.

[28]  I. Chu,et al.  Chondrocytes culture in three-dimensional porous alginate scaffolds enhanced cell proliferation, matrix synthesis and gene expression. , 2009, Journal of biomedical materials research. Part A.

[29]  Hwa-Chang Liu,et al.  A highly organized three-dimensional alginate scaffold for cartilage tissue engineering prepared by microfluidic technology. , 2011, Biomaterials.

[30]  Kai-Chiang Yang,et al.  Investigating the suspension culture on aggregation and function of mouse pancreatic β-cells. , 2013, Journal of biomedical materials research. Part A.

[31]  N. Sgaglione,et al.  Biologic approaches to articular cartilage surgery: future trends. , 2005, The Orthopedic clinics of North America.

[32]  N. Tomita,et al.  Use of controlled mechanical stimulation in vivo to induce cartilage layer formation on the surface of osteotomized bone. , 2002, Tissue engineering.

[33]  Ann L. Johnson,et al.  Chitosan scaffolds: interconnective pore size and cartilage engineering. , 2006, Acta biomaterialia.

[34]  W. Tsai,et al.  The effects of types of degradable polymers on porcine chondrocyte adhesion, proliferation and gene expression , 2006, Journal of materials science. Materials in medicine.

[35]  Jennifer L. West,et al.  Three‐Dimensional Biochemical and Biomechanical Patterning of Hydrogels for Guiding Cell Behavior , 2006 .

[36]  Kai-Chiang Yang,et al.  The interaction between co-cultured human nucleus pulposus cells and mesenchymal stem cells in a bioactive scaffold , 2012 .

[37]  H. Zhang,et al.  Aligned Porous Structures by Directional Freezing , 2007 .

[38]  N. Annabi,et al.  Engineering porous scaffolds using gas-based techniques. , 2011, Current opinion in biotechnology.

[39]  N. Kawazoe,et al.  Preparation of collagen-glycosaminoglycan sponges with open surface porous structures using ice particulate template method. , 2010, Macromolecular bioscience.

[40]  M. Spector,et al.  Autologous chondrocyte implantation. , 2001, Clinical privilege white paper.

[41]  Benjamin M Wu,et al.  Recent advances in 3D printing of tissue engineering scaffolds. , 2012, Methods in molecular biology.

[42]  Cornelia Altenbuchner,et al.  Crosslinking and mechanical properties significantly influence cell attachment, proliferation, and migration within collagen glycosaminoglycan scaffolds. , 2011, Tissue engineering. Part A.

[43]  C. V. van Blitterswijk,et al.  Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.