Numerical analysis of escort tug manoeuvrability characteristics

Abstract The adoption of RANS techniques is widely spread in terms of resistance and self-propulsion prognosis for merchant and military vessels; however, on the other hand, the captive evaluation of hydrodynamic manoeuvring forces across numerical procedures still concerns great computational effort and challenge. When it comes to deal with Escort or tractor tugs, characterised by rather full hull forms, typical of harbour tugs, with the addition of extensive foiled shaped fore-skegs solutions, the ability of predicting manoeuvring and handling of such vessels becomes a great added value at an early design stage, as an alternative to physical model scale testing, since very scarce data are present in open literature. Escort vessels in particular, both operate at low and high speed, in addition to the typical harbour tasks entailed, making the manoeuvring modelling even more complicated. In present work, a low-speed and high-speed numerical methodology based on the OpenFOAM finite volume method on polyhedral unstructured mesh is investigated and validated against purposely designed model tests carried out in towing tank: Pure yaw, pure drift, drift and yaw, and drift and heel simulation results are compared with experimental data in terms of forces first, and impact on manoeuvring lastly, showing satisfactory agreement with experiments. Finally, Escort capability tests run at tank are compared with a purposely calibrated manoeuvring model on the RANS results.

[1]  Giuliano Vernengo,et al.  Ship self-propulsion performance prediction by using OpenFOAM and different simplified propeller models , 2018 .

[2]  Diego Villa,et al.  Numerical Prediction Of Hull Force For Low Velocity Manoeuvring , 2014 .

[3]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[4]  Mohammed Islam,et al.  Investigation of Hydrodynamic Loads and Flow Patterns Near an Escort Tug in Oblique Flows , 2015 .

[5]  Winnifred R. Jacobs.  Method of predicting course stability and turning qualities of ships , 1964 .

[6]  Diego Villa,et al.  The Kriso Container Ship (Kcs) Test Case: An Open Source Overview , 2015 .

[7]  Michele Viviani,et al.  Escort Tug Hydrodynamic Forces Estimation in a Design Framework: From Model Test to Manoeuvrability Simulation , 2018 .

[8]  Richard Birmingham,et al.  Escort tug design alternatives and a comparison of their hydrodynamic performance. Discussion , 2004 .

[9]  S. Gaggero,et al.  An extensive analysis of numerical ship self-propulsion prediction via a coupled BEM/RANS approach , 2017 .

[10]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[11]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[12]  Diego Villa,et al.  All Around Approach for the Design of a New Escort Tug Family , 2018 .

[13]  M. Darwish,et al.  The Finite Volume Method in Computational Fluid Dynamics: An Advanced Introduction with OpenFOAM® and Matlab , 2015 .

[14]  M. Viviani,et al.  Z-Drive Escort Tug manoeuvrability model and simulation , 2019, Ocean Engineering.

[15]  Giulio Dubbioso,et al.  Aspects of twin screw ships semi-empirical maneuvering models , 2012 .

[16]  Diego Villa,et al.  An All-Round Design-to-Simulation Approach of a New Z-Drive Escort Tug Class , 2020 .

[17]  Hannu Jukola,et al.  Z-drive escort tug operating modes , 1995 .

[18]  Katrien Eloot,et al.  CFD-based analyses for a slow speed manoeuvrability model , 2018, Journal of Marine Science and Technology.