Transient heat flow calculation for multilayer constructions using a frequency-domain regression method

A frequency-domain regression method is developed for transient heat flow calculation of multilayer constructions, which estimates a simple polynomial s-transfer function of transient heat conduction in a building construction on the basis of its theoretical frequency characteristics. This simple polynomial s-transfer function is completely equivalent to the hyperbolic s-transfer function in terms of frequency characteristics. First, the frequency characteristics of the total transmission matrix are calculated within the frequency range concerned. Then, a set of linear equations is solved to yield a simple polynomial s-transfer function for internal, cross and external heat conduction, respectively. Finally, the response factors or CTFs are obtained simply by applying inverse Laplace transforms or Z-transforms on the polynomial s-transfer function. The validations and comparisons show that this method has high accuracy and efficiency and has no stability problem.

[1]  George E Kelly,et al.  HVACSIM+ building systems and equipment simulation program: building-loads calculation , 1986 .

[2]  Youming Chen,et al.  A neural-network-based experimental technique for determining z-transfer function coefficients of a building envelope , 2000 .

[3]  Fariborz Haghighat,et al.  A procedure for calculating thermal response factors of multi-layer walls—State space method , 1991 .

[4]  D. G. Stephenson,et al.  Cooling load calculations by thermal response factor method , 1967 .

[5]  Refrigerating ASHRAE handbook and product directory /published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc , 1977 .

[6]  R. C. Sonderegger Dynamic models of house heating based on equivalent thermal parameters , 1978 .

[7]  R. W. Muncey,et al.  Calculation of temperatures in buildings by the matrix method: Some particular cases , 1969 .

[8]  Shengwei Wang,et al.  Dynamic simulation of building VAV air-conditioning system and evaluation of EMCS on-line control strategies , 1999 .

[9]  G. E. Myers,et al.  Long-Time Solutions to Heat-Conduction Transients with Time-Dependent Inputs , 1980 .

[10]  John E. Seem Modeling of Heat Transfer in Buildings , 1987 .

[11]  Louis A. Pipes,et al.  Matrix analysis of heat transfer problems , 1957 .

[12]  D. G. Stephenson,et al.  Room thermal response factors , 1967 .

[13]  Douglas C. Hittle,et al.  An improved root-finding procedure for use in calculating transient heat flow through multilayered slabs , 1983 .

[14]  G. P. Mitalas Calculation of transient heat flow through walls and roofs , 1968 .

[15]  C. O. Pedersen,et al.  Calculating building heating loads using the frequency response of multi-layered slabs. [BLAST code, NBSLD code] , 1981 .

[16]  Morris Grenfell Davies,et al.  WALL TRANSIENT HEAT FLOW USING TIME-DOMAIN ANALYSIS , 1997 .

[17]  F. C. Mcquiston,et al.  A study to categorize walls and roofs on the basis of thermal response , 1988 .