Metal-dielectric band alignment and its implications for metal gate complementary metal-oxide-semiconductor technology

The dependence of the metal gate work function on the underlying gate dielectric in advanced metal-oxide-semiconductor (MOS) gate stacks was explored. Metal work functions on high-κ dielectrics are observed to differ appreciably from their values on SiO2 or in vacuum. We applied the interface dipole theory to the interface between the gate and the gate dielectric of a MOS transistor and obtained excellent agreement with experimental data. Important parameters such as the slope parameters for gate dielectrics like SiO2, Al2O3, Si3N4, ZrO2, and HfO2 were extracted. In addition, we also explain the weaker dependence of n+ and p+ polysilicon gate work functions on the gate dielectric material. Challenges for gate work function engineering are highlighted. This work provides additional guidelines on the choice of gate materials for future MOS technology incorporating high-κ gate dielectrics.

[1]  Sigurd Wagner,et al.  Heterojunction band discontinuities , 1976 .

[2]  Carlton M. Osburn,et al.  Impact of gate workfunction on device performance at the 50 nm technology node , 2000 .

[3]  K. Onishi,et al.  Electrical characteristics of highly reliable ultrathin hafnium oxide gate dielectric , 2000, IEEE Electron Device Letters.

[4]  Rustum Roy,et al.  Materials Research Society , 1984 .

[5]  Chenming Hu,et al.  Dual-metal gate CMOS technology with ultrathin silicon nitride gate dielectric , 2001, IEEE Electron Device Letters.

[6]  D. Eastman,et al.  PHOTOELECTRIC WORK FUNCTIONS OF TRANSITION, RARE-EARTH, AND NOBLE METALS. , 1970 .

[7]  R. G. Wilson,et al.  Vacuum thermionic work functions of polycrystalline Nb, Mo, Ta, W, Re, Os, and Ir. , 1966 .

[8]  S. Berge,et al.  Photoelectric work function of a molybdenum single crystal for the (100), (110), (111), (112), (114), and (332) faces , 1974 .

[9]  Jack C. Lee,et al.  Electrical and reliability characteristics of ZrO2 deposited directly on Si for gate dielectric application , 2000 .

[10]  J.M.C. Stork,et al.  The impact of high-/spl kappa/ gate dielectrics and metal gate electrodes on sub-100 nm MOSFETs , 1999 .

[11]  L. W. Swanson,et al.  Work function measurements by the field emission retarding potential method. , 1973 .

[12]  C H B Mee,et al.  Work function measurements on (100), (110) and (111) surfaces of aluminium , 1973 .

[13]  A. Stesmans,et al.  Band alignments in metal–oxide–silicon structures with atomic-layer deposited Al2O3 and ZrO2 , 2002 .

[14]  Douglas A. Buchanan,et al.  Fabrication of midgap metal gates compatible with ultrathin dielectrics , 1998 .

[15]  J. Robertson.  Band offsets of wide-band-gap oxides and implications for future electronic devices , 2000 .

[16]  Volker Heine,et al.  Theory of Surface States , 1965 .

[17]  Lin H. Yang,et al.  Atomic Scale Observations of Metal-Induced Gap States at \{222\} MgO/Cu Interfaces , 1998 .

[18]  Jerry Tersoff,et al.  Calculation of Schottky barrier heights from semiconductor band structures , 1986 .

[19]  E. H. Nicollian,et al.  Mos (Metal Oxide Semiconductor) Physics and Technology , 1982 .

[20]  Chenming Hu,et al.  Effects of high-/spl kappa/ gate dielectric materials on metal and silicon gate workfunctions , 2002, IEEE Electron Device Letters.

[21]  Veena Misra,et al.  Use of metal–oxide–semiconductor capacitors to detect interactions of Hf and Zr gate electrodes with SiO2 and ZrO2 , 2001 .

[22]  Mönch.  Role of virtual gap states and defects in metal-semiconductor contacts. , 1987, Physical review letters.