Cantilever beam designs for RF MEMS switches

This paper presents the design, modeling, fabrication and measurements of two novel radio frequency microelectromechanical systems (RF MEMS) switches. Two new non-standard cantilever beams have been designed in order to validate the mathematical model developed for the calculation of the spring constant and to verify the fabrication parameters. The mechanical modeling is based on the Euler?Bernoulli beam equations. The fabricated switches using these cantilever beams exhibit 19 V and 23 V actuation voltages. The fabrication consists of a six-mask all-metal process. A unique dry-release technique is also described. The RF simulations and measurements of these switches are finally presented. The isolation is better than 23 dB and 27 dB and the return loss is better than 19 dB and 18 dB, from 0 to 40 GHz. The insertion loss is 1.15 dB and 1.3 dB for the two designs, respectively, for all frequency bands of interest.

[1]  S.M. Kuo,et al.  Motorola MEMS switch technology for high frequency applications , 2001, 2001 Microelectromechanical Systems Conference (Cat. No. 01EX521).

[2]  T. Christenson,et al.  Fabrication of micromechanical devices from polysilicon films with smooth surfaces , 1989 .

[3]  David Potter,et al.  Microswitches and microrelays with a view toward microwave applications , 1999 .

[4]  S. Duffy,et al.  MEMS microswitches for reconfigurable microwave circuitry , 2001, IEEE Microwave and Wireless Components Letters.

[5]  G. Tan.  High-performance RF MEMS circuits and phase shifters. , 2002 .

[6]  Calvin Plett,et al.  Design and characterization of a MEMS capacitive switch for improved RF amplifier circuits , 2005, Proceedings of the IEEE 2005 Custom Integrated Circuits Conference, 2005..

[7]  M. Orpana,et al.  Control of residual stress of polysilicon thin films by heavy doping in surface micromachining , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[8]  A. Boisen,et al.  Dry release of suspended nanostructures , 2004 .

[9]  R. Howe,et al.  Critical Review: Adhesion in surface micromechanical structures , 1997 .

[10]  K. Harsh,et al.  Flip-chip assembly for Si-based RF MEMS , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[11]  C. Mastrangelo.  Suppression of stiction in MEMS , 1999 .

[12]  J.S. McKillop,et al.  Design of a 20 GHz Low Loss Ohmic Contact RF MEMS Switch , 2007, 2007 IEEE/MTT-S International Microwave Symposium.

[13]  Rodica Ramer,et al.  Dry release of MEMS structures using reactive Ion etching technique , 2009, 2009 3rd IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications.

[14]  K. Entesari,et al.  Tuning in to RF MEMS , 2009, IEEE Microwave Magazine.

[15]  R.R. Mansour,et al.  Scalable RF MEMS Switch Matrices: Methodology and Design , 2009, IEEE Transactions on Microwave Theory and Techniques.

[16]  S. Pranonsatit,et al.  Rotary RF MEMS Switch Based on the Wobble Motor Principle , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[17]  R.R. Mansour,et al.  Thermally Actuated Latching RF MEMS Switch and Its Characteristics , 2009, IEEE Transactions on Microwave Theory and Techniques.

[18]  Rodica Ramer,et al.  A novel RF MEMS switch with novel mechanical structure modeling , 2010 .

[19]  Mojgan Daneshmand,et al.  Monolithic crossbar MEMS switch matrix , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[20]  Robert B. Darling,et al.  Physical Modeling of MEMS Cantilever Beams and the Measurement of Stiction Force , 2001 .

[21]  Roger T. Howe,et al.  The effect of release-etch processing on surface microstructure stiction , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[22]  John Heck,et al.  Metal contact reliability of RF MEMS switches , 2007, SPIE MOEMS-MEMS.